Author Topic: building a pcwio interface  (Read 284 times)

0 Members and 1 Guest are viewing this topic.

Offline Sebastian Blanco

  • CPC6128
  • ****
  • Posts: 155
  • Country: uy
  • Liked: 71
  • Likes Given: 2
building a pcwio interface
« on: 22:48, 27 April 21 »
Hi guys,


Well i like to build the PCW-IO interface from habi(http://www.habisoft.com/pcwwiki/doku.php?id=es:hardware:perifericos:pcw-io)
Considering how simple is just purchased a pic16F628A and started soldering.
To just try soldered a socket the PIC and a PS/2 port to test the keyboard function and used a floppy plug to the PCW keyboard, now i have problems programming the pic chip.


Have 2 programers a VS4800 and a G540 have different errors example, when loading the prueba.hex from the project the program complains that theirs no configuration options and i see this "configuration bits".
What ones i enable ?, because when i program it will fail to finish and i have troubles erasing the PIC.



If someone that is more experience in PIC programming can help me out on this  :o