Author Topic: Using the PCW 8256/8512 as a Dumb Terminal (2014)  (Read 2251 times)

0 Members and 1 Guest are viewing this topic.

Offline ComSoft6128

  • ..................................
  • Supporter
  • 6128 Plus
  • *
  • Posts: 2.445
  • Country: scotland
  • CPC THEN CPC NOW
    • index.php?action=treasury
    • Awards
Using the PCW 8256/8512 as a Dumb Terminal (2014)
« on: 19:16, 31 December 18 »
Interesting, if too short, thread from vintage-radio.net:

https://www.vintage-radio.net/forum/showthread.php?t=102997

Other PCW links from the site:

https://cse.google.com/cse?cx=008872823631354711830%3A4sch4flwhxq&ie=UTF-8&q=amstrad+pcw&s=Search+this+website
https://cse.google.com/cse?cx=008872823631354711830%3A4sch4flwhxq&ie=UTF-8&q=amstrad+pcw&s=Search+this+website

« Last Edit: 19:53, 31 December 18 by ComSoft6128 »
like
0
No reactions

Offline GeoffB17

  • 6128 Plus
  • ******
  • Posts: 836
  • Country: gb
  • PCW since '85, more CP/M than Loco
    • Awards
Re: Using the PCW 8256/8512 as a Dumb Terminal (2014)
« Reply #1 on: 21:02, 31 December 18 »
Note that the link above goes to a forum regarding use of the PCW as a terminal for something else.   The forum includes a link to an article in another magazine detailing the design of the CPS8256 interface, including a circuit for a 'clone' of this interface, which certain people here might find useful?

The article for the clone is written by Brian Frost.   I believe that this will be the same person who wrote another article recently quoted here for the 'scientific Interface' for the PCW, there credited as Brian J Frost.

Geoff
like
0
No reactions

Offline JonB

  • 6128 Plus
  • ******
  • Posts: 769
  • Country: gb
    • Awards
Re: Using the PCW 8256/8512 as a Dumb Terminal (2014)
« Reply #2 on: 13:12, 01 January 19 »
I've had a play with this and here is the result so far.

 
uSIO-8.PNG
* uSIO-8.PNG
(Filesize: 228.73 KB, Dimensions: 1430x1034, Views: 161)


(Also as alluded to here: http://www.cpcwiki.eu/index.php/UIDE_Universal_IDE_adapter_cards_for_Z-80_computers#PCW_Serial_.2F_parallel_port.)

This is a Z80 bus device, so would plug into a Z80 shim or the uIDE expansion port adapter. You can make a bus cable to connect it and the uIDE to the PCW using female IDC sockets mounted directly to a 40 way ribbon cable. This board is a clone of the Amstrad CPS8256 interface and so should work with the existing Amstrad drivers.

Only thing is, it is still on the "drawing board"; that is to say, I've not had boards fabricated or built one yet. There was no interest from other users.
like
0
No reactions