News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu
avatar_JonB

CP/M Plus 1.11 - 1.5 download

Started by JonB, 21:15, 19 February 17

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JonB

hi


I need to find a downloadable image of CPM Plus 1.11 to 1.15 so that I can tell uIDE users with older versions that don't support FIDs where to get the upgrade from.


I don't have it myself.


I had a look about, but couldn't find it.


Any ideas?


Cheers


JonB

GeoffB17

Jon,

As well as the 2.9 already posted, I have 1.12 and 1.15 (which are the same as versions 2.12 and 2.15, according to JE).

There are differences between these two versions, but I think nothing that will trouble those with 8??? machines, where many of the changes may be irrelevant?

Do you want both, or just the earlier (safer ?) one?

Geoff

JonB

Both, to be safe.


But I think it just boils down to the EMS files?

GeoffB17

Hello Jon,


I hopefully attach a .ZIP file, containing a couple of system files.


J12cpm3.ems and j15cpm3.emt


The .EMT file should still work on the PCW 8256 if the file is renamed to .EMS


I also have a file j21cpm3.ems, which is version 2.01 of the system, but this does NOT work with the 8xxx machines.   I understand that this version is fixed to use A: as 720k, and it does NOT use FIDs, so it cannot be altered.   Later versions were more flexible, so the version 2.9 which I have WILL boot from SSSD disk a: unless a .FID is loaded to change this.


Both the files I've included SHOULD work with FIDs, and both DO boot OK on a 8xxx machine.


Geoff

JonB

Nice one Geoff!


Users of the older CP/Ms who want to use uIDE-8 should install one of these 1.x versions.

GeoffB17

Further to note via PM, file attached as discussed.


Geoff

Powered by SMFPacks Menu Editor Mod