Found a Masterfile 8000 Disk - How to Run?

[Amagni]

We found a pair of 3" disks in a donation at the Australian Computer Museum yesterday and while I was able to read them in my CPC, they appear to be intended for a PCW:

You cannot view this attachment.

I used a Ulifac to image the disks to DSK files, and opened the first DSK in a PCW emulator.  I thought I'd just be able to type "MF8000" at the CP/M command line but it just sort of waits a few seconds then goes back to the prompt:
You cannot view this attachment.
Is there something else I need to type to get it to run?

The second disk was marked "daily" and had some kind of text files on both sides:
You cannot view this attachment. You cannot view this attachment.
I can open the files in Notepad++ but they have a bunch of control characters in them and I'd prefer to use the right software if anyone can identify it.

Thanks in advance!

[robcfg]

Interesting...

The manual definitely says that typing MF8000 at the prompt should start the program.

You can check the manual here: https://habisoft.com/pcwwiki/doku.php?id=en:aplicaciones:masterfile_8000

I checked the Masterfile 8000 from the PCW Wiki and it starts without problem.

One thing I've noticed is your version of CP/M is different than mine, maybe that could be the issue?

[Amagni]

Ok, I downloaded the Masterfile 8000 disk from the wiki you linked, and that one runs.
I can open the files on my disk with that, but it looks like they're just the example files anyway:
You cannot view this attachment.

I'm still not sure how to read the files on the other disk, I guess they are for a word processor but I don't know which one:
You cannot view this attachment.

[robcfg]

Have you tried good ol' LocoScript?