Started by geebus, 17:37, 05 August 20
0 Members and 1 Guest are viewing this topic.
Quote from: PCWPIP on 21:09, 05 November 20PCW uses a 26-pin header with integrated power as described here (CPCWiki), requiring an adapter to connect to the Gotek 34-pin header plus power. Please note that this is NOT the same as the CPC 26-pin header, and if you use a CPC-compatible adapter or cable you may damage your Gotek or your PCW!
Quote from: PCWPIP on 23:21, 05 November 20I took a 1.07 CP/M .dsk image and used CPCDiskXP to remove the original .EMS file and replace it with J15CPM3.EMS. When I try to boot from this .dsk image on the gotek it gets to about where I should get an A> prompt but it hangs there. If I hit the gotek button to swap disk I get a read error, if I then switch back to the disk image and hit R the boot finishes and I get the prompt.
Page created in 0.073 seconds with 53 queries.