News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu
avatar_Skunkfish

PSU for Amiga 1200

Started by Skunkfish, 12:33, 07 April 21

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Skunkfish

I did consider posting this in some Amiga forums, but that would involve signing up and dealing with all of the bickering....

I picked up an Astec AA21430 for pittance a little while ago, which I'm hoping to use to replace my aging A1200 PSU in a nice 3D printed case.
(PSU is this model: http://www.azsurplus.com/index.php?main_page=product_info&cPath=43_44&products_id=3946)

Ideally I'd like to replace the AT-style power connector with some sort of DIN socket for power, and knock up a cable with a plug for that on one and and the 5-pin square power connector for the Amiga at the other...

Keeping in mind the current required for the Amiga and wanting to avoid any voltage drop due to the Amiga's sensitivity, can anyone suggest a suitable socket/plug for this?

Would this be any good? https://uk.rs-online.com/web/p/dc-power-connectors/6677287
An expanding array of hardware available at www.cpcstore.co.uk (and issue 4 of CPC Fanzine!)

Bryce

Every connection is a potential failure point. I'd connect an original Amiga power cable directly to the PSU.

Bryce.

Skunkfish

#2
Quote from: Bryce on 14:39, 07 April 21
Every connection is a potential failure point.
Ah, so you've seen my soldering skills?!  ;D


Point taken, although I wasn't planning on sacrificing the original PSU for the cable....
An expanding array of hardware available at www.cpcstore.co.uk (and issue 4 of CPC Fanzine!)


Skunkfish

Quote from: OffseT on 17:18, 07 April 21https://www.c64psu.com/

Sure, I could just buy one ready to go - but where's the fun in that?
An expanding array of hardware available at www.cpcstore.co.uk (and issue 4 of CPC Fanzine!)

Bryce

Quote from: Skunkfish on 16:30, 07 April 21
Ah, so you've seen my soldering skills?!  ;D


Point taken, although I wasn't planning on sacrificing the original PSU for the cable....

And where are you going to get an Amiga 5pin square plug without using an original?

Bryce.

OffseT

Quote from: Bryce on 17:41, 07 April 21
And where are you going to get an Amiga 5pin square plug without using an original?


https://amigastore.eu/en/788-amiga-c128-psu-connector.html

megachur


Bryce


Skunkfish

Quote from: Bryce on 19:19, 07 April 21
Didn't know they were still available.
Somebody out there's been churning out some new ones for a couple of years now, I think the quality is supposed to be reasonable as well....
An expanding array of hardware available at www.cpcstore.co.uk (and issue 4 of CPC Fanzine!)

Skunkfish

Quote from: megachur on 19:09, 07 April 21
If you like CISCO power supply, you should have buy this one for less : https://www.consolekabels.be/a-54163779/voedingen/amiga-500-500-600-1200-aftermarket-voeding/#description
The link wasn't the one that I purchased, there's a seller on eBay selling dozens of the things for £5.45 each (inc delivery): https://www.ebay.co.uk/itm/192940058212
An expanding array of hardware available at www.cpcstore.co.uk (and issue 4 of CPC Fanzine!)

Powered by SMFPacks Menu Editor Mod