Hey Folks,
I tried different versions of gryzor. Sometimes the game crashes on Startscreen, other versions saying it needs 128k (I have a 6128) and others charades directly.
I have the lower rom on slot 31.
Infuse a M4Board and I'm not very familiar with the CPC because I use most of the time C64s and Amigas. Sponsored for this maybe stupid question.
You got the modified lower rom installed on slot 31 ?? Without it I cannot even get to the title screen ...
After that ... yes, it's a bit fragile but as soon as you get into the game (press fire quickly after getting into main screen) the game works for me ...
Quote from: Tormentor22 on 21:17, 09 August 21
Hey Folks,
I tried different versions of gryzor. Sometimes the game crashes on Startscreen, other versions saying it needs 128k (I have a 6128) and others charades directly.
I have the lower rom on slot 31.
Infuse a M4Board and I'm not very familiar with the CPC because I use most of the time C64s and Amigas. Sponsored for this maybe stupid question.
try this : http://cngsoft.no-ip.org/gryzorex.zip
Thank you guys. I will check it out this evening.
Here you go. Gryzor running with an M4 Board*.... :)
Bryce.
*Yes, it's a slow day today.
Oh no Bryce, no...
(https://media4.giphy.com/media/ac7MA7r5IMYda/giphy.gif)
I'll grab my coat...
Bryce.
:P
So i tried the Version XeNoMoRPH shared and i get the same behaviour. On main screen pushing fire button nothing happens. Do i press the space bar, i get a blue screen and the machine freezes. I attached a picture of my rom configuration. Maybe there is somethign wrong?!
Did you try to start it without the M4 frontend ? I don't see anything wrong in the config ... I use the M4 on a 464 with Dk'tronics ram expansion but I could set up my 6128 tomorrow for testing ....
plan B: use this : https://files.fm/u/fvzpf6bsr (https://files.fm/u/fvzpf6bsr)
works fine, tested on my M4. 8)
Quote from: SkulleateR on 22:50, 11 August 21
Did you try to start it without the M4 frontend ? I don't see anything wrong in the config ... I use the M4 on a 464 with Dk'tronics ram expansion but I could set up my 6128 tomorrow for testing ....
Yes i did try it. Same behaviour.
The file doesnt work,too. Maybe stupid question. Do i have to upload the m4 rom or is this done by the Firmware? And if not, where do i get it. Im. Ot sure if there is a rom file in slot 7(nr6).
Quote from: Tormentor22 on 16:56, 12 August 21
The file doesnt work,too. Maybe stupid question. Do i have to upload the m4 rom or is this done by the Firmware? And if not, where do i get it. Im. Ot sure if there is a rom file in slot 7(nr6).
Can you record one vídeo , loading Game ?
Works fine for me, no modified lower rom with m4fe in slot 5?
Also on a CPC6128, CRTC 2
@Gryzor (https://www.cpcwiki.eu/forum/index.php?action=profile;u=1) Can you run with the M4 board?
Quote from: Shaun M. Neary on 18:29, 12 August 21
Works fine for me, no modified lower rom with m4fe in slot 5?
Also on a CPC6128, CRTC 2
I have the mod. Rom In Slot 31.
I will do a video later.
Try removing it and putting m4fe in slot 5.
Also what slot is the m4 rom?
Works on my 464 with M4.
OS 1.1 in slot 31, BASIC 1.1 in slot 0. M4 ROM is in default slot ( 6 or 7( @Duke (https://www.cpcwiki.eu/forum/index.php?action=profile;u=1624) will know)).
Quote from: TotO on 18:54, 12 August 21
@Gryzor (https://www.cpcwiki.eu/forum/index.php?action=profile;u=1) Can you run with the M4 board?
Unfortunately, pending a move and renovation all my stuff is under the stairs😓
Where do I get the m4 rom? From the official site? Maybe someone have a link?
Quote from: Tormentor22 on 19:52, 12 August 21
Where do I get the m4 rom? From the official site? Maybe someone have a link?
See where the rom number at the top is at 6?
Change it to 7
Good luck!
Quote from: XeNoMoRPH on 06:21, 10 August 21try this : http://cngsoft.no-ip.org/gryzorex.zip (http://cngsoft.no-ip.org/gryzorex.zip)
(apologies for the off-topic) this version also runs on the usifac2 (and works on 464 w/o ram expansions)