Started by Vyper68, 14:02, 08 March 18
0 Members and 1 Guest are viewing this topic.
Quote from: Vyper68 on 14:02, 08 March 18Hi,I bought a Disk copy of Klax off eBay and it was listed as tested. In any event it turned out not to be. I was given a refund and told to keep the disk. I wasn't able to format it at first but using the magnet trick listed on the site i was able to remove the corrupted data and have been able to format both sides of the disk ok.What i would like to do is re-write the the disk back to it's original state. It was a CPM disk and i'm not sure how to do this. I did have the DSK image on my M4 and i thought i would be able to copy the files to the A: drive but the M4 goes bizzwhack when i enter the DSK image ( probably because it's CPM ) i could copy the cracked version to the disk but i wanted the original.Anyone got any ideas how to do this? - I don't know enough about CPC's at this point.
Quote from: tjohnson on 01:57, 09 March 18I had a little play and didn't get much luck copying the disk, the best I could come up with was to transfer CDT tape file to disk then copy those over, it would mean you wouldn't use CPM to run it but use run"klax
Quote from: Vyper68 on 14:39, 09 March 18I never thought about copying the original tape image to the disk instead. It's frustrating as the CPM .DSK image runs OK but i don't have a FD1 to write it to a 3" disk just a Gotek.
Quote from: CraigsBar on 02:40, 10 March 18Why not try copying it to the disc from the gotek with xexor? Sent from my ONEPLUS 3t using Tapatalk
Quote from: tjohnson on 13:36, 10 March 18I did actually try that using the unprotected copy of Xexor and it didn't work, got read errors, might have another go.
Quote from: CraigsBar on 13:49, 10 March 18I've got a 3inch drive in a pc if you want to send me the blank/original disc I can try and write it with cpcdiskxp for ya directly onto it. Sent from my ONEPLUS 3t using Tapatalk
Page created in 0.063 seconds with 35 queries.