News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu

ROM software positions/slots in a X-Mem

Started by CPC_Fan, 21:12, 03 September 15

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

francouai

FW3.15 works when I set the jumper to "ROM"
I correctly configure the XMEM to have 3.15 FR ; 444ko and CPM on 7and 8.
since.. this card don't want to take any other ROM in.  :doh:
--
francois

francouai

I just tried to install SYMBOS rom into 5/29/30/31

I set the BOOT jumper to CPC.
power on my CPC+

enter this CMD lines ("ù" because I'm using a AZERTY keyboard.)
ùflash,"SYM-ROMA.ROM",5  = screen is scratching then back to the prompt
ùflash,"SYM-ROMB.ROM",29 = screen is scratching then back to the prompt
ùflash,"SYM-ROMC.ROM",30 = screen is scratching then back to the prompt
ùflash,"SYM-ROMD.ROM",31= screen is scratching then back to the prompt

Power off the CPC+
Set the BOOT jumper to ROM.

Power on the CPC+
CPC is booting on the FW3.15
I enter ùSYM.. "unknown command"

I launch "ROMAIN V1 Rom Manager" software, and I see nothing on the blocks 5/29/30/31

Hoooo yeahhhhhhh...  :picard:
--
francois

TFM


Did you set the X-MEM to Write enable?    Else...

Well, then please use my ROManager, maybe this helps. See download section of www.FutureOS.de  :)
TFM of FutureSoft
Also visit the CPC and Plus users favorite OS: FutureOS - The Revolution on CPC6128 and 6128Plus

francouai

Yes, the jumper 3 is set to "FREE"
--
francois

francouai

problem fixed.
not sure how.. but it works now.

BOOT to CPC
run"INIT
run"INTALL  (without D drive and CPM)
run"FLASH
and go...
--
francois

Powered by SMFPacks Menu Editor Mod