avatar_Audronic

Wanting - a File Editor that can allow me to edit a ROM File (hex)

Started by Audronic, 10:23, 18 April 23

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Audronic

Hi All

I am looking for a File Editor that can allow me to edit a ROM File (hex)

Is there a stand alone Program or a Suitable Rom that I can use ?

Thanks

Keep Safe

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

Audronic

I am trying to change The RSX Name of " Roman2" from  "ROM" to "ROM2" as it now conflicts with the ULIFAC.

Thanks

Keep Safe

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

HAL6128

Do it in Windows. Take e.g. HxD (free Hex-Editor), load the Rom file into it and change the name, write it back. But you should take a name with the same length, because it's hard coded. Otherwise you create an address conflict.
...proudly supported Schnapps Demo, Pentomino and NQ-Music-Disc with GFX

McArti0

CPC 6128, Whole 6128 and Only 6128, with .....
NewPAL v3 for use all 128kB RAM by CRTC as VRAM
TYPICAL :) TV Funai 22FL532/10 with VGA-RGB-in.

GUNHED

Quote from: Audronic on 10:23, 18 April 23Hi All

I am looking for a File Editor that can allow me to edit a ROM File (hex)

Is there a stand alone Program or a Suitable Rom that I can use ?

Thanks

Keep Safe

Ray
You can edit any ROM with the ROManager 2.43 for FutureOS.  :)

ROManager does exist as 16 KB ROM too. And you won't need romam any longer.  ;) :)
http://futureos.de --> Get the revolutionary FutureOS (Update: 2023.11.30)
http://futureos.cpc-live.com/files/LambdaSpeak_RSX_by_TFM.zip --> Get the RSX-ROM for LambdaSpeak :-) (Updated: 2021.12.26)

Audronic

Thanks to ALL who offered suggestions

But after 3 Days, Trying I have not been successful.

I will provide the Roman2 Rom in the chance that somebody would be able to help

The Original Commands are To activate The ROM either |ROM  or |ROMAN
If it is possible to Get the commands to Be " |ROM2 AND |ROMAN

Thanks

Keep Safe

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

HAL6128

It's not possible to extend the RSX to 4 letters without relocation of the addresses.
The RSX is stored in the code with "RO","M"+&80.
You need to find a 3 letter name and store it in the same way "??","?"+&80
...proudly supported Schnapps Demo, Pentomino and NQ-Music-Disc with GFX

Audronic

@HAL6128 

Ok Thanks for That

Perhaps Just Make it "RAY" so it does not conflict with "ROM"

Thats all I can think of to get around the concern

So the Commands would Be " |ROMAN " and |RAY" 

If That could be done That would be Great

Thanks for looking into it

Thanks

Keep Safe

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

GUNHED

Ok, then I did that for you using ROManager
- You get the ROM2 command
- You get the RAY command

Have fun!
http://futureos.de --> Get the revolutionary FutureOS (Update: 2023.11.30)
http://futureos.cpc-live.com/files/LambdaSpeak_RSX_by_TFM.zip --> Get the RSX-ROM for LambdaSpeak :-) (Updated: 2021.12.26)

Audronic

@GUNHED (TFM)

Thanks for that.
I will test it over the next 2 days and see how it works 

I tried to find your ROManager on your site but was not able to find it.

Would it be possible to send me a copy or a link to it Please

Thanks for all your work on this project

Thanks

Keep Safe

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

Audronic

@GUNHED 

Thanks it has resolved the concern I had, Both Versions work.

Thanks again for the GOOD Quick work

Keep Safe

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

poulette73

There's also another alternative to use ROManager 2.0 : it's to use the floppy disc in file version.
The DSK version can be used as desired:
  • on a real 3" or 3"1/2 disc.
  • with a Gotek.
  • or on any expansion board like M4 Boad, USIfAC II, ULIfAC, others... with a USB key.

The big advantage is that it doesn't occupy any slot of a romboard.
And no more conflicts with a ULIfAC or USIfAC II card.

But the result is 100% identical. 😉

Just run the program with run"DISC

https://cpcrulez.fr/applications_disc-roman.htm


Audronic

@poulette73 

Ok Thanks for the thought

I have a working Rom that will suffice.

But a good Idea anyway

Thanks

Keep Safe

Ray
Procrastinators Unite,
If it Ain't Broke PLEASE Don't Fix it.
I keep telling you I am Not Pedantic.
As I Live " Down Under " I Take my Gravity Tablets and Wear my Magnetic Boots to Keep me from Falling off.

GUNHED

Quote from: Audronic on 00:16, 20 April 23@GUNHED (TFM)

I tried to find your ROManager on your site but was not able to find it.

You can go to www.futureos.de (see my signature), then you click at 'Downloads' at the left side. Now scroll down you'll find it.  :) But I guess your problem is solved anyway.  :) :) :)
http://futureos.de --> Get the revolutionary FutureOS (Update: 2023.11.30)
http://futureos.cpc-live.com/files/LambdaSpeak_RSX_by_TFM.zip --> Get the RSX-ROM for LambdaSpeak :-) (Updated: 2021.12.26)

Powered by SMFPacks Menu Editor Mod