Author Topic: 6128 - Gotek external - how to set as A:  (Read 204 times)

0 Members and 1 Guest are viewing this topic.

Offline auberwn

  • CPC464
  • **
  • Posts: 6
  • Country: gr
  • 6128
  • Liked: 0
  • Likes Given: 0
6128 - Gotek external - how to set as A:
« on: 20:40, 29 April 20 »
I've connected my Gotek USB (with HxC firmware updated to the lastest version) on my 6128 externally. It's recognized as B: and works ok like that on a couple of games I tested it with. But I've read some apps don't work from B:. I've read that if I bridge pins 11 and 12 on the ribbon, after boot, it will flip the letters (A: <-> B:) and the external will become A:. One of the jumpers on the Gotek (the one marked S1) is connected to one of those pins. But when I bridge it, it doesn't work.
Ha anyone figured this out?



Offline vasilisk

  • CPC664
  • ***
  • Posts: 79
  • Country: gr
  • CPC6128
  • Liked: 19
  • Likes Given: 115
Re: 6128 - Gotek external - how to set as A:
« Reply #1 on: 18:33, 30 April 20 »
If I remember correctly, the jumper in S1 is for "B" drive and in S0 is for "A" drive. Show us how the ribbon in each end is connected.