Started by alextp77, 06:38, 30 May 21
0 Members and 1 Guest are viewing this topic.
Quote from: Bryce on 14:49, 30 May 21Once usually does the trick. I'd suggest you degauss the CRT first before you start fiddling around inside. It may have just been stored beside a big speaker or something. As for touching things inside a running monitor - My advice : Don't!Bryce.
Quote from: Bryce on 21:22, 30 May 21Most likely just dirt on the contacts, but could also be a partial break in the cable. The brightness is changing because the CPC is getting more power when the connection is good. Try cleaning both side of the 5V connector / socket.Bryce.
Quote from: Bryce on 09:28, 31 May 21Soap and water won't clean contacts. In fact these soap and water baths do nothing positive for the electroonics, they just make the PCB look slightly better for you and may even make the situation worse. You need to use proper contact cleaner on the contacts.Bryce.
Page created in 0.055 seconds with 35 queries.