Author Topic: 6 pin cord Cut CTM 644  (Read 248 times)

0 Members and 1 Guest are viewing this topic.

Offline JPas2001

  • Speccy
  • *
  • Posts: 1
  • Country: fr
    • Awards
6 pin cord Cut CTM 644
« on: 12:08, 25 July 21 »
Hello there !
First of all sorry for my bad English, hope you'll understand my problem.

I got the 6 pin cord Cut of my CTM 644 monitor. I want to replace this, but i dont found the colour code.

I got red, green , blue , yellow, black , white and brown cable. I don't know with which pin must be soldered.

Someone have this information ?

Thanks in advance.

JPas
like
0
No reactions

Offline SkulleateR

  • 464 Plus
  • *****
  • Posts: 472
  • Country: de
    • Awards
Re: 6 pin cord Cut CTM 644
« Reply #1 on: 15:13, 28 July 21 »
I once changed the DIN connector on my CTM640 but basically it should have the same wire setup ... only thing is, I had no white wire but maybe I just forgot to write it down ....


Anyway (use at your own risk) :


Solder Side DIN
Pin 1 -> red (R)
Pin 2 -> green (G)
Pin 3 -> blue (B)
Pin 4 -> yellow (HSYNC)
Pin 5 -> black (GROUND)


so I still don't have a clue about white and brown, one should be luminance I guess .... maybe someone can fill the missing wire connections here ?
« Last Edit: 15:15, 28 July 21 by SkulleateR »
like
0
No reactions