Author Topic: m4 board and xmem  (Read 1686 times)

0 Members and 1 Guest are viewing this topic.

Offline dimdim80

  • CPC464
  • **
  • Posts: 28
  • Country: gr
  • Liked: 4
  • Likes Given: 0
m4 board and xmem
« on: 18:06, 16 November 19 »
Hello everyone i have a question regarding the mothermx4 board,m4 board and xmem expansion.I have instaleed them on mother x4 board but it seems it doeanst work.if i install xmem or duke m4board separately they work ok.but when i plug them on to motherx board they dont.is there sth i am missing?
Thanks

Offline TotO

  • 6128 Plus
  • ******
  • Posts: 3.689
  • Country: fr
    • ?area=showdonations;u=4
  • Liked: 2810
  • Likes Given: 1689
Re: m4 board and xmem
« Reply #1 on: 18:18, 16 November 19 »
Hello,

Move the M4 ROM to range 32-63 or disable the X-MEM ROM to not have conflicts. (depending of your usage)
"You make one mistake in your life and the internet will never let you live it down" (Keith Goodyer)

Offline Ast

  • 6128 Plus
  • ******
  • Posts: 1.077
  • Country: fr
    • Amstrad cpc Website of Ast/iMPACT
  • Liked: 957
  • Likes Given: 726
Re: m4 board and xmem
« Reply #2 on: 23:57, 16 November 19 »
I don’t move the m4 roms and i don’t have any problems !
How do you move the m4 roms ?
_____________________

Ast/iMP4CT. "By the power of Grayskull, i've the power"


Amstrad Plus French Forum

All friends are welcomed !

Offline Maniac

  • CPC6128
  • ****
  • Posts: 218
  • Country: gb
  • Liked: 74
  • Likes Given: 199
Re: m4 board and xmem
« Reply #3 on: 00:55, 17 November 19 »
I’ve found the best thing to do is to disable the XMEM ROM capability and just use the M4 ROMs. Works a treat.

Offline TotO

  • 6128 Plus
  • ******
  • Posts: 3.689
  • Country: fr
    • ?area=showdonations;u=4
  • Liked: 2810
  • Likes Given: 1689
Re: m4 board and xmem
« Reply #4 on: 02:41, 17 November 19 »
I don’t move the m4 roms and i don’t have any problems ! How do you move the m4 roms ?
Into the M4 settings page, set the ROM start from 32.
"You make one mistake in your life and the internet will never let you live it down" (Keith Goodyer)

Offline francouai

  • CPC664
  • ***
  • Posts: 117
  • Country: fr
  • CPC6128+
  • Liked: 25
  • Likes Given: 26
Re: m4 board and xmem
« Reply #5 on: 10:58, 17 November 19 »
got the same problem.the real problem of this nice M4 board is the memory.  I hope to see a M5 board later on with more nice things.  :P
--
francois

Offline TotO

  • 6128 Plus
  • ******
  • Posts: 3.689
  • Country: fr
    • ?area=showdonations;u=4
  • Liked: 2810
  • Likes Given: 1689
Re: m4 board and xmem
« Reply #6 on: 11:54, 17 November 19 »
Here, the problem is the user.  :P
"You make one mistake in your life and the internet will never let you live it down" (Keith Goodyer)

Offline dimdim80

  • CPC464
  • **
  • Posts: 28
  • Country: gr
  • Liked: 4
  • Likes Given: 0
Re: m4 board and xmem
« Reply #7 on: 15:41, 17 November 19 »
 
I need xmem for the additional ram.i will tey to mobe ot as instruvred and let you know.thanks






quote author=TotO link=topic=16294.msg180501#msg180501 date=1573921127]
Hello,

Move the M4 ROM to range 32-63 or disable the X-MEM ROM to not have conflicts. (depending of your usage)

Offline dimdim80

  • CPC464
  • **
  • Posts: 28
  • Country: gr
  • Liked: 4
  • Likes Given: 0
Re: m4 board and xmem
« Reply #8 on: 13:58, 18 February 20 »
This is what i get with xmem only

Offline dimdim80

  • CPC464
  • **
  • Posts: 28
  • Country: gr
  • Liked: 4
  • Likes Given: 0
Re: m4 board and xmem
« Reply #9 on: 14:02, 18 February 20 »
And this is what u get with both on. If i use m4 board directly to certronic port it runs ok.same goes for xmem.

Offline dimdim80

  • CPC464
  • **
  • Posts: 28
  • Country: gr
  • Liked: 4
  • Likes Given: 0
Re: m4 board and xmem
« Reply #10 on: 14:05, 18 February 20 »
This is with only m4 board on mothermx4

Offline dimdim80

  • CPC464
  • **
  • Posts: 28
  • Country: gr
  • Liked: 4
  • Likes Given: 0
Re: m4 board and xmem
« Reply #11 on: 21:29, 18 February 20 »
Ok i trued to change it through browser but i had to connetct to wifi first.so when i try to connect to wifi i get error message no ap found

Offline dimdim80

  • CPC464
  • **
  • Posts: 28
  • Country: gr
  • Liked: 4
  • Likes Given: 0
Re: m4 board and xmem
« Reply #12 on: 21:31, 18 February 20 »
I also copies basic rom in m4 folder of sd and set it using this command Iromup and Iromset,32,1
Now it stucks and cannot do anything picture below

Offline dimdim80

  • CPC464
  • **
  • Posts: 28
  • Country: gr
  • Liked: 4
  • Likes Given: 0
Re: m4 board and xmem
« Reply #13 on: 01:30, 19 February 20 »
After some hours i managed to solve it.Thanks everyone for the help!

Offline TotO

  • 6128 Plus
  • ******
  • Posts: 3.689
  • Country: fr
    • ?area=showdonations;u=4
  • Liked: 2810
  • Likes Given: 1689
Re: m4 board and xmem
« Reply #14 on: 13:25, 19 February 20 »
Great!  :)
"You make one mistake in your life and the internet will never let you live it down" (Keith Goodyer)

Offline Ast

  • 6128 Plus
  • ******
  • Posts: 1.077
  • Country: fr
    • Amstrad cpc Website of Ast/iMPACT
  • Liked: 957
  • Likes Given: 726
Re: m4 board and xmem
« Reply #15 on: 15:20, 02 March 20 »
Hi there,


Tree weeks ago, i broke the microSD card support on my M4.


I send it back to @Duke who fixed it very quickly.


I'd like to send my best greetings to @Duke to pay tribute to his professionalism.


Thank you Man !!! :D
_____________________

Ast/iMP4CT. "By the power of Grayskull, i've the power"


Amstrad Plus French Forum

All friends are welcomed !

Offline TotO

  • 6128 Plus
  • ******
  • Posts: 3.689
  • Country: fr
    • ?area=showdonations;u=4
  • Liked: 2810
  • Likes Given: 1689
Re: m4 board and xmem
« Reply #16 on: 18:50, 02 March 20 »
Yes. Lucky you, it is not a Piotr/Zaxon's board issue!  :-\
"You make one mistake in your life and the internet will never let you live it down" (Keith Goodyer)