Author Topic: M4Board + XMass = Modern art?  (Read 547 times)

0 Members and 1 Guest are viewing this topic.

Offline m_dr_m

  • CPC6128
  • ****
  • Posts: 275
  • Country: se
  • http://orgams.wikidot.com/
    • OrgaMS!
  • Liked: 180
  • Likes Given: 195
M4Board + XMass = Modern art?
« on: 00:58, 10 February 21 »
I have an X-Mass on slot 2 of the MX4 Board.
Behind, the M4. No other extensions.


Here's what I get at power ON:



The CPC is perfectly operating, as the commands show.
I deactivated the ROMs for the picture.
All the zero-initialised RAM is corrupted like that (e.g. ?peek(&4000) = 189)
I had the same behaviour on another CPC 6128, and my ports are clean!
No problem afterwards (with CPC hard reset or M4 reset).


So, not dramatic (at least I hope!).

Offline Duke

  • Supporter
  • 6128 Plus
  • *
  • Posts: 1.259
  • Country: dk
    • spinpoint.org
  • Liked: 1473
  • Likes Given: 1206
Re: M4Board + XMass = Modern art?
« Reply #1 on: 19:31, 10 February 21 »
What firmware version is the M4 board using?

Other than that I have no experince with the X-Mass board, maybe others have tried it along with M4 board?

Offline Ast

  • 6128 Plus
  • ******
  • Posts: 1.236
  • Country: fr
    • Amstrad cpc Website of Ast/iMPACT
  • Liked: 1143
  • Likes Given: 806
Re: M4Board + XMass = Modern art?
« Reply #2 on: 19:39, 10 February 21 »
M4 and xMass with iMPdos work perfectly together....
You can also do some copies between these two fabulous cards.


M4rom is installed on slot 6 (on m4 board)
IMPdos is installed on slot 3 (on xmem board)
« Last Edit: 19:41, 10 February 21 by Ast »
_____________________

Ast/iMP4CT. "By the power of Grayskull, i've the power"

http://amstradplus.forumforever.com/index.php
http://impdos.wikidot.com/
http://impdraw.wikidot.com/

All friends are welcomed !

Offline m_dr_m

  • CPC6128
  • ****
  • Posts: 275
  • Country: se
  • http://orgams.wikidot.com/
    • OrgaMS!
  • Liked: 180
  • Likes Given: 195
Re: M4Board + XMass = Modern art?
« Reply #3 on: 21:44, 10 February 21 »
@Duke I'm using the version 2.0.5, I think it's the latest.


@Ast Good to know, but that's not a DOS issue here. Both cards works, I'm just a bit wary about hardware interferences.