General Category > Technical Support

Strange CPC 6128 /drive behaviour

<< < (2/3) > >>

Bryce:
See attachment. If the drive isn't reacting to commands, the output drivers have a problem. If the drive reacts to commands but the computer reports an error, then the input drivers have a problem.

Bryce.


Kris:
Hi Bryce,


Thanks for your feedback.
The drive is able to load a software without any issue, I will check the inputs driver

GUNHED:

--- Quote from: Kris on 10:26, 03 May 21 ---Thanks for your feedback.
The drive is able to load a software without any issue, I will check the inputs driver

--- End quote ---
If you can load from the drive then its communication seems to be fine.
Can it be that all hardware is fine, but the software has a problem?
Else I would suggest to check if the optical sensor for the index hole works.

Kris:
Hi Gunhed,


I really think that the issue is coming from the motherboard of the CPC, the drive is fully working in an other keyboard (RPM & DSKtest are working fine).

GUNHED:

Yes, you changed boards, I forgot. So, something inside the CPC.There are days we wish to have every IC in a socket.... Good luck!

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version
Powered by SMFPacks Media Embedder
Powered by SMFPacks Alerts Pro Mod
Powered by SMFPacks Mentions Pro Mod