Does anyone in the forum sell just a copy of the cartridge with the OS and burnin rubber?I have an orphaned plus here without the cartridge. :'(
The cheapest way to do that is to buy a couple of these and solder them up yourself.
https://www.ebay.co.uk/itm/133748459011
Bryce.
If you do not find any solution. I can build one of mine for you. Be aware: My design is without ASIC but with the RC-Hack.
Hi @Shining (https://www.cpcwiki.eu/forum/index.php?action=profile;u=922) ,
"My design is without ASIC but with the RC-Hack"
Forgive my ignorance but what does that mean?
The ACID (https://www.cpcwiki.eu/index.php/Amstrad_Cartridge_Identification_Device) is that copy protection chip on every original cart which can nowadays be emulated by a CPLD (for example on the C4CPC). The ACID communicates with the ASIC in the plus and the ASIC will prevent correct write-access to the EPROM in the cart, when the ACID is not present.
Nilquader and Octoate found a timing-bug in the ASIC some years ago, where you can replace the ACID through some simple logic. Their solution only had one very little problem: a reset without powering off and on could prevent the plus to reboot. After analyzing this a little bit, I made a pcb without this problem for personal use. I do not know, if it runs always with this but it does in more than 10 machines....
I only know spanish sites:
¡Mira lo que acabo de encontrar en Wallapop!
Cartucho juego pc amstrand 464 plus
http://p.wallapop.com/i/494364383?_pid=wi&_uid=21695364&_me=s_android
Juego Burnin' Rubber & Locomotive Basic para Amstrad CPC Plus http://www.todocoleccion.net/videojuegos-consola-amstrad/juego-burnin-rubber-locomotive-basic-para-amstrad-cpc-plus~x187119016
Anyway invalid because probably you want the yellow?.
The todocoleccion guy tell in the announce he do international shipment.
Yes, I'm looking for the English version, but thanks for the link!
Quote from: Shining on 14:00, 11 June 21
If you do not find any solution. I can build one of mine for you. Be aware: My design is without ASIC but with the RC-Hack.
Will it work normally on a CPC plus? I mean will I have the functions needed for normal operation and locomotive BASIC?Thanks!
Quote from: Shining on 14:33, 11 June 21I made a pcb without this problem for persona
have you shared this already or would you consider that?
If you are not in a hurry this one normally works fine...
https://www.befr.ebay.be/itm/293044385661
Hello banana,
today, I've soldered a cart for a friend. So I thought: soldering two is nearly the work soldering one.
So I made one UK system cartridge for you, too.
If you sent me your address via PM, I'll ship the cart to you.
Love that logo :D I would take one, if I had a Plus :(
Quote from: Shining on 13:02, 14 June 21
Hello banana,
today, I've soldered a cart for a friend. So I thought: soldering two is nearly the work soldering one.
So I made one UK system cartridge for you, too.
If you sent me your address via PM, I'll ship the cart to you.
Oh WOW!!! Thank you so very much!! I'll PM you.