Changes

Jump to: navigation, search

Analog Joysticks

404 bytes added, 00:27, 15 June 2018
/* Analog PC Joysticks */
Analogue joysticks confirmed to be compatible with the CPC+:
* [[Amstrad Analogue Joystick AJ-5]]
* [[Amstrad's Sinclar Sinclair SPJ-1|Amstrad's Sinclair SPJ-1]] Arnold 5 Diagnostic cart test results - {| class="wikitable"|-! Manufacturer !! Model !! Fire Common !! Resistor !! Centre X !! Centre Y !! X Axis min !! X Axis max !! Y Axis min !! Y Axis max !! Ref !! Notes|-| Quickshot || QS-6219 || Pin 4 || TBC || &1a-&27 || &1c-2b || &00-&0f || &2c-&33 || &00-&12 || &31-&35 || dthrone || Ranges correspond to x and y axis adjust sliders|}
== Analog PC Joysticks ==
* '''Reversed Supply Voltages''' - Compared with PC Gameports, the +5V and GND are connected vice-versa in the CPC+. This is no problem for the potentiometers (both PC and CPC+ use Pin1 as pot-common). However, it is a problem if the joystick contains '''additional electronics''' (auto-fire circuits, electrolyte capacitors, circuits inside of ''digital'' joysticks/gamepads that do emulate analog signals, etc.) These won't work (and may get damaged by the reversed voltages). If necessary, remove any such electronics before connected the joystick to the CPC+.
* '''Resistor Values''' - In PCs, the A/D conversion is done by software timings, meaning the PCs could handle joysticks with different potentiometer types (anything from 10 kiloohm to many megaohm should work). The CPC+ does the A/D conversion by hardware, this requires less CPU load, but it also means that it requires fixed potentiometer types (circe circa '''138K138k''' ohmΩ).** Analog PC joysticks are reportedly most commonly using '''100K100k''', '''120K120k''', or '''150K150k''' ohm Ω pots. These types should be more or less compatible with the CPC+ (100K/120K won't reach the ADC=3Fh max value, for example, resolution might be only ADC=00h..30h. And 150K would be clipped to ADC=3Fh for anything above 138K ohm138kΩ).** To handle those different pot types, CPC+ software should include calibration options. ** There are also some PC joysticks with incompatible pot types like '''300K300k''' ohms Ω - these won't work (since values above 138K 138k will be clipped).
== CPC+ Software with Analog Joystick Support ==
* [[FutureOS]] - (Plus version)
* [[Tennis Cup 2 ( Cartridge )]] - allows to use Analog Joystick (as digital joystick replacement in two-player mode, selectable in options menu - the game merely emulates digital inputs, it doesn't actually support analog input)
* RP11 Arnold V diagnostic ROM cartridge - allows to display the eight ADC inputs in numeric form
*[[FutureOS]] - homebrew operating system (Plus version)
 [[Category:HardwareCPC Plus]][[Category:PeripheralsFutureOS]][[Category:CPC PlusGames Programming]][[Category:StubInput Device]][[Category:Peripherals]]
903
edits