Changes

[[Rodrik Studio ]] announced its PicoCPC expansion card, which was is created with the help of [[FreddyV ]] (the author of the [https://github.com/FreddyVRetro/ISA-PicoMEM PicoMEM ISA card for IBM PC]).

[[File:PicoCPC proto2proto.jpegjpg|600px]] [[File:Modular PicoCPC.jpg|600px]]

Final <br> == Architecture == The PicoCPC use a Pico2, connected via multiplexor. This let enough pin to add an I2S DAC, MicroSD and some more control signals. The Final board will be really different, with soldered RP2350BDirectly soldered. No 5V pin go to the pico. We use some 1 buffer, 1 level shifter, 3 multiplexers. We write to the CPC with 3.3V, we use 5V to the CPC only to drive some signal like A15 for C3 memory mode and IOReq to disable intern floppy. We prefer to have somerthing between the Pico and the CPC, as even if 5V work now, there is no guarantee that the boards will work after some years of intensive usage.It is really better to be carefull. The board can decode any I/O port and of course RAM/ROM cycles. As it use a Pico2, its RAM is doubled vs Pico1 and it can access a 8MB PSRAM as well. The PicoCPC does NOT use a CH376 chip, everything is done with the Pico itself. PicoCPC handles FAT12, 16, 32, ExtFS. CH376 will be emulated on the board, with nothing to do at the CPC side. There is no external ROM, so the microntroller access the emulated RAM/ROM and USB/MicroSD at the same time: Direct write from the uSD to the CPC emulated RAM at 3MB/s (For example).

The PicoCPC is clocked at 375Mhz [https://www366Mhz.cpcwiki.eu/forum/amstrad-cpc-hardware/picocpc/msg248409/#msg248409 Source], so So it is not as powerful as the [[RSF3]] clocked at 480Mhz. But it is more powerful than the [[M4 Board]] clocked at 168Mhz. [https://www.spinpoint.org/2015/10/23/cortex-m4-board/ Source] <br> === Multiplexers === The "Secret" of the PicoMEM/PicoCPC is its multiplexers. [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/picocpc/msg249997/#msg249997 Source]It allow to limint the number of I/O needed and act as a Voltage converter at the same time. The Pi Pico allow to have multiple PIO core, plus the main core working together in parallel,so the PIO manage the Multiplexer, reconstruct the Address, while CPU core detect and manage the Control signals, Read in advance the High part of the address to jupt to the correct code.(IO MEM Read or Write, Bank number)So, when the Main core is in the correct code section, it can read directly the full Address from the PIO. The PicoCPC use only 12 I/O to manage all the address, Data and Control signals. We can add 2 pin only to control the multiplexer.Then, the CPC bus is "manipulated" Via ROMDIS, RAMDIS, RD, A15, IOREQ (Pico Output) With this way to do, it is possible to be almost as fast with multiplexing that without.

Currently, the features of the PicoCPC areIt now has :

* ROM Emulation *RAM Emulation (allows transforming a 464/664 into a 6128)* RAM, all modes, except C3 mode for now* Keyboard key remapping to English, French, Spanish* Floppy disk controller emulation, supporting .DSK and even most of the copy protected games. (works only on 464 )*Create Floppy "pack" and 464+swap between them with a button*Navigate in the SD and run games from it*Setup program helping to do the initial config if there is no config file on the SD (With graphics and music)* Emulation of Various commands, to list and load the [[TMPI speech synthesizer]]ROM and Disk images

This card uses the Raspberry Pico 2, so it’s conceivable that new features could be added C3 mode to arrive in the futurenext hardware release (update 09/04/2025: C3 mode works perfectly fine). And much more for the final hardware release: vocal synthesizer, cpr cartridges, usb mouse, wifi, nfc, ...

In Here’s the translation into English of the description of the 07/03/2025 video, it is written:

It’s still far from being finished, but it’s progressing well. What’s still missing: *"Elle est encore loin d'être terminéeLoading and unloading ROMs from BASIC *Copying files between SD and floppy disk *Saving files to SD (for now, the Pico can only read and launch) *Formatting floppy disks *Displays on the I2C screen during the Wizard *All the sound part *All the Wi-Fi part *All the NFC part Prototype 2 will require a major change on the I/O side but should normally open up more possibilities, like the C3 memory mode on 464/664, switching to 512KB of extended memory, and sound. At the moment, I’m aiming for June as a tentative date. Even if the code isn’t finished, mais avance bienthe hardware should be."

*"Dans ce qu'il manque In the comments of that video, Rodrik said:" *Charger et décharger des ROM depuis le basic *Copie des fichiers entre SD et disquette *Sauver des fichiers sur SD (pour l'instant le Pico ne sait que lire et lancer) *Formater des disquettes *Des affichages sur l'écran I2C pendant le Wizard *Toute la partie son *Toute la partie wifi *Toute la partie NFC

*"le prototype 2 va nécessiter un gros changement coté When it works on all CPCs, including the Plus models, and the hardware is more or less final, I’m aiming for June."*"The features will evolve; I/O mais ouvrira normalement plus de possibilités comme le mode mémoire C3 sur 464/664wrote that in the description. The next big thing will be sound—voice synthesizer—but also a second AY chip and maybe some other quirky stuff like Adlib. Then Wi-Fi and NFC."*"I plan to add Wi-Fi later if possible, le passage à 512ko de mémoire étendue et le sonand also USB, which is simpler than micro SD for transferring things."*"I can even say it’s very likely that Plus cartridges will be emulated soon."*"Wi-Fi is planned for the longer term; the separate Wi-Fi module for Pico2 isn’t available yet."*"There are too many boards, often too expensive, hard to find, and with different features. The idea is that the PicoCPC should cost half the price of a DDI5."*"I didn't check the price of DDI-5, but this one will be around 70€."*"I will have a distributor in UK, so no problem."*"When the board is ready, I will open-source both ROMs, the PicoCPC and the Wizard."*"It’s coming along, but it’ll take a few more months. The final board will be pretty high-tech with 4 layers, etc., and some surprises like connectivity features."*"There will be a case around it to make it look like a peripheral from back in the day."*"The HDD part isn’t great; binaries that load other binaries won’t work. In the end, I could only put a few games on it."

*"À l'heure actuelleOn 12/04/2025, je vois Juin comme tentative. Même si le code ne sera pas fini, le hardware devrait l'être."Rodrik posted on CPCwiki forum:

In I wanted to clarify few things, there is no interest list, nowhere to register to. When the comments of that videocard is ready enough, Rodrik said:it will be made available via resellers in France, UK and maybe US.* "Quand elle fonctionnera sur tous les I still don't know when this will happen, the card did progress of lot since the start in December last year, this means 4 months ago. But I think 3 more months at least are required to make it work properly on all CPC y compris les Plus et que je hardware est plus ou moins finalflavors. Je table vers Juin The card is currently limited by the RB2350, I do not have enough gpio, so I either use an oled screen, either I2S DAC, either use the pins to drive some signals on the bus. So it requires a new revision with e 2350B soldered on board."* "les fonctions vont évoluer Feature list is unknown yet, je l'ai écrit en descriptionbut it will grow over time. Le prochain gros truc sera le sonThe card will be available with lot of hardware, synthétiseur vocalbut only future firmware revision may make use of it. On 04/05/2025, mais aussi un second AY et peut-être dRodrik posted on its facebook page: https://www.facebook.com/100050156822393/posts/1220749709606912/ It'autres choses tordues comme Adlibs been a while since I posted here, so I'm here to give you some news about the future of PicoCPC. Puis le wifi et le nfc4 days of work to get it routed after quite a few hours getting everything set up."* "Je compte mettre le wifi si possible plus tard et aussi L’USBUSB-A port for a USB key initially on the HDD or for loading floppy disk images, plus simple que la micro cartridges, or ROMs, and more from the SD pour transférer des choses"cards.* "je peux même dire qu'il est fort possible que les cartouches plus soit émulée bientôtUSB-C port for flashing the PicoCPC."* "Le wifi est prévu à plus long termeMicro DVI port, le module wifi séparé pour pico2 nfuture if I can get there 😉* Integrated DAC, we'étant pas encore disponiblell see what I can get out of it."* "Il y a trop de cartesButtons for controlling floppy disk images without the CPC.* 1MB of SRAM, souvent trop cher, introuvables et avec des fonctions différentesfor large cartridges or lots of memory/ROM. Dans l'idée la picocpc devrait coûter la moitié du prix d'un ddi5."* "Il y aura une boite autour16MB of flash, pour en faire un périphérique ressemblant à ceux d'époquenot usable by the CPC, too slow, but I could store things on it as ROM."Daughter board* "La partie HDD est pas topAudio output* Buttons* NFCThe white square on the daughter board is the location of the OLED display.This version, les binaires chargeant des binaires ne fonctionneront paswhich could be v1. Je n'ai pu mettre que peu de jeux dessus au final0, will be manufactured in late May." <gallery>File:Pimoroni Picocpc.jpg|v0.2 assemblyFile:PicoCPC RSX info.jpg|v0.2 pluggedFile:PicoCPC RTC.jpg|v0.2 RTCFile:PicoCPC v0.9.jpg|v0.9 DesignFile:PicoCPC v0.9 render top.jpg|v0.9 Render topFile:PicoCPC v0.9 render back.jpg|v0.9 Render backFile:PicoCPC v0.9 daughterboard.png|v0.9 Daughter board (white square is screen)</gallery>

* [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/picocpc/ Thread Topic on CPCwiki forum]