Difference between revisions of "Connector:Printer port"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→CPC Plus Pinout) |
(→CPC Plus Pinout) |
||
| Line 34: | Line 34: | ||
As shown above Pin9 is wired to GND (instead of Data 7), for upgrading, see [[8bit Printer Ports]]. | As shown above Pin9 is wired to GND (instead of Data 7), for upgrading, see [[8bit Printer Ports]]. | ||
| − | == CPC Plus Pinout == | + | == CPC Plus and KC Compact Pinout == |
[[Image:plus-printer.jpg|400px|Amstrad CPC Printer port]] | [[Image:plus-printer.jpg|400px|Amstrad CPC Printer port]] | ||
{|{{Prettytable|width: 700px; font-size: 2em;}} | {|{{Prettytable|width: 700px; font-size: 2em;}} | ||
| − | |''Pin No.''||''CPC+''||''PC'' | + | |''Pin No.''||''CPC+''||''KC Compact''||''PC'' |
|- | |- | ||
| − | | 1 || /Strobe ||/Strobe | + | | 1 || /Strobe ||/Strobe ||/Strobe |
|- | |- | ||
| − | | 2 || Data 0 ||Data 0 | + | | 2 || Data 0 ||Data 0 ||Data 0 |
|- | |- | ||
| − | | 3 || Data 1 ||Data 1 | + | | 3 || Data 1 ||Data 1 ||Data 1 |
|- | |- | ||
| − | | 4 || Data 2 ||Data 2 | + | | 4 || Data 2 ||Data 2 ||Data 2 |
|- | |- | ||
| − | | 5 || Data 3 ||Data 3 | + | | 5 || Data 3 ||Data 3 ||Data 3 |
|- | |- | ||
| − | | 6 || Data 4 ||Data 4 | + | | 6 || Data 4 ||Data 4 ||Data 4 |
|- | |- | ||
| − | | 7 || Data 5 ||Data 5 | + | | 7 || Data 5 ||Data 5 ||Data 5 |
|- | |- | ||
| − | | 8 || Data 6 ||Data 6 | + | | 8 || Data 6 ||Data 6 ||Data 6 |
|- | |- | ||
| − | | 9 || Data 7 ||Data 7 | + | | 9 || Data 7 ||Data 7 ||Data 7 |
|- | |- | ||
| − | | 10 || NC ||/Ack | + | | 10 || NC ||NC ||/Ack |
|- | |- | ||
| − | | 11 || Busy ||Busy | + | | 11 || Busy ||Busy ||Busy |
|- | |- | ||
| − | | 12 || NC ||PaperEnd | + | | 12 || NC ||NC ||PaperEnd |
|- | |- | ||
| − | | 13 || NC ||SLCT | + | | 13 || NC ||NC ||SLCT |
|- | |- | ||
| − | | 14 || NC ||/AutoLF | + | | 14 || NC ||NC ||/AutoLF |
|- | |- | ||
| − | | 15 || NC ||/Error | + | | 15 || NC ||NC ||/Error |
|- | |- | ||
| − | | 16 || +5V ||/Init | + | | 16 || +5V ||NC ||/Init |
|- | |- | ||
| − | | 17 || GND ||/Select | + | | 17 || GND ||NC ||/Select |
|- | |- | ||
| − | |18-25|| GND ||GND | + | |18-25|| GND ||GND ||GND |
|- | |- | ||
|} | |} | ||
| − | + | CPC+ and KC Compact printer ports differ only on Pin 16,17. | |
[[Category:Hardware]][[Category:CPC Internal Components]] | [[Category:Hardware]][[Category:CPC Internal Components]] | ||
Revision as of 23:00, 28 January 2010
Classic CPC Pinout
| Pin No. (CPC) | Description | Pin No. (CPC) | Description |
| 1 | STROBE | 19 | GND |
| 2 | Data 0 | 20 | GND |
| 3 | Data 1 | 22 | GND |
| 4 | Data 2 | 23 | GND |
| 5 | Data 3 | 24 | GND |
| 6 | Data 4 | 25 | GND |
| 7 | Data 5 | 26 | GND |
| 8 | Data 6 | 28 | GND |
| 9 | GND | 33 | GND |
| 11 | BUSY | ||
| 14 | GND | ||
| 16 | GND |
There is no pin 18 to get a centronics-compatible pin numbering. Ie. although the CPC uses a 34pin edge connector, the pins are numbered as on a 36pin centronics connector.
As shown above Pin9 is wired to GND (instead of Data 7), for upgrading, see 8bit Printer Ports.
CPC Plus and KC Compact Pinout
| Pin No. | CPC+ | KC Compact | PC |
| 1 | /Strobe | /Strobe | /Strobe |
| 2 | Data 0 | Data 0 | Data 0 |
| 3 | Data 1 | Data 1 | Data 1 |
| 4 | Data 2 | Data 2 | Data 2 |
| 5 | Data 3 | Data 3 | Data 3 |
| 6 | Data 4 | Data 4 | Data 4 |
| 7 | Data 5 | Data 5 | Data 5 |
| 8 | Data 6 | Data 6 | Data 6 |
| 9 | Data 7 | Data 7 | Data 7 |
| 10 | NC | NC | /Ack |
| 11 | Busy | Busy | Busy |
| 12 | NC | NC | PaperEnd |
| 13 | NC | NC | SLCT |
| 14 | NC | NC | /AutoLF |
| 15 | NC | NC | /Error |
| 16 | +5V | NC | /Init |
| 17 | GND | NC | /Select |
| 18-25 | GND | GND | GND |
CPC+ and KC Compact printer ports differ only on Pin 16,17.
