Changes
/* Transferring software to the PCW */
* Use a serial adapter such as the Amstrad CPS8256 and a copy of KERMIT to transfer over serial.
* Install a 3.5" floppy drive and transfer via floppies. You will need a program such as CPCDiskXP to put PCW disk image files onto the floppy. This program can also copy a downloaded file to a disk image.
* You can use '''cpmtools''' to access files on an image of your uIDE IDE device, and win32diskimager (under Windows) or dd (under linux) to copy the entire image to/from your Z80 machine's IDE device. Read the section below about the uIDE disk image.
There may be other ways to achieve this (such as using a LocoLink cable) but it is out of scope of this WIKI page. If in doubt, ask on the forum.
=== BASIC program to load the driver from a DOM ===
