Changes

Jump to: navigation, search

UIDE Universal IDE adapter cards for Z-80 computers

5 bytes added, 16:59, 13 March 2017
/* uIDE-16 for the PCW */
=== uIDE-16 for the PCW ===
uIDE-16 needs slightly different settings to work on a PCW. It still needs to be configured for the base address '''C8''', but there are some extra steps:
* First, check that the 8-bit addressing mode fix has been applied. See the build section above. If it's not been done, you will not be able to use uIDE-16 on a PCW.
* Next, set '''JP2''' to '''8 bit'''.
* Set '''A15-A8''' to '''1, 1, 1, 1, 1, 1, 1, 0''' respectively. This coincides with the 6128 uIDE-16 I/O upper byte address (FE) and isn't really necessary as the setting is ignored when the card is in 8-bit address mode. But you need somewhere to keep the jumpers so they don't get lost...
412
edits