[[Image:Alt_Scart_Connect.PNG|600px|thumb|none|Schematic to connect to RGB without requiring a 1.5V supply (Colour Picture) The 9V supply (as shown above) may still be required if the TV-Set has no AV Source Selector. If you experience picture flickering or the TV OSD appears intermittently while the CPC is connected, add a 100µf capacitor (optional) as shown above, this should resolve these problems. This setup won't work with all TVs. Some small 15" LCD TVs (for camping) have been reported to show ghost images with this setup, where a greyscale image is displayed besides the RGB image.]]
[[Image:Cpc_to_scart_rgb_sw'''The alternative wiring has been reported to often not work with modern LCD TVs or Scart2HDMI converters.png|600px|thumb|none|Schematic In those cases often a (bad) gray scale image will be displayed or there will be no picture at all. It is recommended to connect to RGB on no longer use this wiring and instead provide a TV set without RGB switchreal 3V voltage on pin 16, e. You can get g. by connecting it to the +5 VDC from the CPC 5V power supply.]]with the help of a simple voltage divider resistor:'''
'''The alternative wiring has been reported [[Image:Cpc_to_scart_rgb_sw.png|600px|thumb|none|Schematic to often not work with modern LCD TVs or Scart2HDMI converters. In those cases often connect to RGB on a (bad) gray scale image will be displayed or there will be no picture at allTV set without RGB switch. It is recommended to no longer use this wiring and instead provide a real 3V voltage on pin 16You can get the +5 VDC from the CPC power supply.''']]
=== Amstrad CPCplus (In theory also GX4000, but it has its own SCART outlet) ===