[[Image:RGBtoSVideoPCBMini_S_Video3.jpg|300px400px|right]][[Image:RGBtoSVideoComponent.jpg|300px|right]][[Image:AD724.JPG|300px|right]]
== Description ==
* If your modulator only has the S-Video ouput, you can still connect to a composite TV input by using an S-Video to composite adapter. This adapter combines the Chrominance and Luminance signals back together (passively), but again the quality will not be as good as the S-Video picture, so this method should only be considered as a last resort.
== Internal Installation ==
If you do decide to install the miniature version of the modulator inside a CPC or even just give it a casing, the following dimensions can be used. The 42mm x 27mm dimensions of the PCB may vary slightly.
[[Image:AD724_Dim.png|480px|centre]]
The new mini version is a mere 32mm x 25mm and is even easier to fit inside most computers.
[[Image:Mini_S_Video2.jpg|480px|centre]]
The following files are the PCB and component position layouts to construct the circuit above:
[[File:AD724_Mod_Layout.pdf]] - PCB Track Layout for full SMD version (with Composite Output) as seen in the third picture above. The miniature S-Video only layout with mixed SMD / through-pin components will be uploaded soon.
[[File:AD724_Mini_Layout.pdf]] - Miniature PCB Track Layout with mixed SMD / through-pin components (only has S-Video Socket).
== NTSC ==