Changes

Although the CPC6128 was sold as a Colour Personal Computer, its configuration in the as delivered condition referred to a good Home Computer with 128 KB RAM, 180 KB disc drive and 32 KB Video RAM. By adding 512 KB of RAM, an external 800 KB disc drive, a 20 MB hard disk, a RS232C serial interface as well as a Mouse, the CPC6128 was turned into a strong Personal Computer. Thus, a lot of business applications that existed for [[CP/M]]-80 could be executed with ease: [[WordStar]], [[Protext]], [[Multiplan]], [[SuperCalc 2]], [[DBase II]], [[DR Draw]], [[DR Graph]], [[Programming software]], to name a few. <br><br> '''COSMOS''' is a personal '''COS'''t '''MO'''nitoring '''S'''ystem developed programed by [[KSL|KSL]] for the CPC6128 and runs under [[CP/M]]-80operating system, the latter being the industry standard of the late 70s - early 80s. It This budget monitoring system is a business application similar to the MSDOS-era PC applications and one of the most recent (2005-20202021) projects developed for CP/M-80. Unlike most applications for CP/M, COSMOS is built upon the '''mouse based graphics user interface''' as pioneered by Xerox at Palo Alto and popularized by Apple with the Lisa and Macintosh computers. <br><br> Nowadays, COSMOS requires the [[Dobbertin]] version of [[CP/M|CP/M 2.2]] (min 128 KB RAM) and can be used on an external disk drive everyday basis (min 360 KB). Moreover, it supports the 512 KB using [[Dobbertin Memory ExpansionCaPriCe]], the 20 MB or [[Dobbertin HarddiscWinCPC]], the [[Amstrad Serial Interface]], the Amstrad Parallel [[Printer Port]], the [[CTM640/CTM644]] colour monitor and the [[AMX Mouse]]. <br><br> COSMOS can be used on an everyday basis or a real CPC) in order to edit the daily income, plan the monthly expenses and perform trial and error analyses aiming at maximizing the annual profit. In addition to its main functions, Notice that COSMOS also contains the latest version of [[ASCII Tools]] (in order to deal with the COSMOS output files) as well as its own graphics module (not the standard [[GSX]]). By executing the setup installation utility (A>SETUP) that is included in the COSMOS original disk, the user can initialize any annual project or start a temporary project in order to become familiar with the COSMOS user interface and functions. As far as the controls are concerned, '''Cursor keys''' or '''Mouse''' can be used in order to control the pointer. '''[F0]''' key simulates the left button of the mouse, whereas '''[F.]''' key simulates the right button of the mouse. Left button can be used for (Yes), whereas the right button can be used for (No),(Next) or (On-Board) help. ESC key can be used to quit. <br><br>

'''To download COSMOS has been developed on the latest version basis of COSMOS the hardware peripherals as well as the software that were (v.26contemporary) available for the CP/Winter 2020M and the CPC6128: the 512 KB [[Dobbertin Memory Expansion]], the [[ParaDOS]] or [[X-DDOS]] ROMS for the external (800 KB) use floppy drive, the link located at 20 MB [[Dobbertin Harddisc]], the bottom of this page[[Amstrad Serial Interface]], the Amstrad Parallel [[Printer Port]], the [[CTM640/CTM644]] colour monitor, the [[AMX Mouse]], the [[MicroScript]] (142 KB), the [[WordStar]] (706 KB), the [[Protext]] (406 KB), the [[Multiplan]] (208 KB), the [[SuperCalc 2]] (240 KB), the [[DBase II]] (272 KB), the [[DR Draw]] (235 KB), the [[DR Graph]] (306 KB), the [[MAXAM]] (206 KB), the [[Atlast Plus]] (224 KB) and other [[Programming software]].''''''Boot COSMOS includes its own graphics routines (similar to [[GSX]]), is based on the [[Dobbertin]] version of CP/M using 2.2 (v1.2) which provides 59 KB TPA, supports the original COSMOS disk RAM expansion and execute A>SETUP.COMthe 20 MB hard disk.''' <br><br> In addition to the command and chain files, COSMOS original disc also contains the CP/M 2.2 (v1.2) boot sectors as well as an installation utility. By executing the latter utility (A>SETUP) the user can initialize any annual project or start a temporary project in order to become familiar with the COSMOS user interface and functions. Upon installing COSMOS in drive B or HD20 it is suggested to execute COSMOS using all the available extra RAM (no RAM load minimization) and to use a new empty CP/M 2.2 (v1.2) boot disk in drive A as the redundant disk. Notice that a A full annual project of COSMOS, including the user attachments, the user block of invoices, the summary files as well as the user agenda notices requires minimum 350 KB of disc space. <br><br><br><br>As far as the controls are concerned, '''Cursor keys''' or '''Mouse''' can be used in order to control the pointer. '''[F0]''' key simulates the left button of the mouse, whereas '''[F.]''' key simulates the right button of the mouse. Left button can be used for (Yes), whereas the right button can be used for (No),(Next) or (On-Board) help. ESC key can be used to quit. <br><br>

'''To download the final version of COSMOS (v.27/November 2021) use the link located at the bottom of this page.''' <br>'''Boot CP/M 2.2 v1.2 using the original COSMOS disk and execute A>SETUP.COM.''' <br><br>The project is completed.