Changes

Jump to: navigation, search

Gate Array

1,367 bytes removed, 14 March
/* See also */
Gate Array
Also designated as Video gate Array (VGA, not to be confused with IBM PC compatible graphic card spec).
== Introduction ==
In the CPC+ system, the functions of the Gate-Array are integrated into a single [[ASIC|ASIC]]. When the ASIC is "locked", the extra features are not available and the ASIC operates the same as the Gate-Array in the CPC allowing programs written for the CPC to work on the Plus without modification. The ASIC must be "un-locked" to access the new features.
In the [[KC Compact Computer|KC compact]] system, the functions of the Gate-Array are "emulated" in [[TTL logic|TTL logic]] and by the chips, [[Zilog Z8536 CIOOverview|Zilog Z8536 CIO]], and its color translation EPROM.
In the "cost-down" version of the CPC6128, the functions of the Gate-Array are integrated into a ASIC.
The Gate Array is described here is the one found in a standard CPC.
== What does it do? ==
The function to be performed is selected by writing data to the Gate-Array, bit 7 and 6 of the data define the function selected (see table below). It is not possible to read from the Gate-Array.
{| class="FCK__ShowTableBorders"{{Prettytable|width: 700px; font-size: 2em;}}
|-
| ''Data Bit 7'' || ''Data Bit 6'' || ''Function''
|-
| 0 || 0 || Select pen
|-
| 0 || 1 || Select colour for selected pen
|-
| 1 || 0 || Select screen mode, ROM configuration and interrupt control|-| 1 || 1 || RAM Memory Management (note 1)
|-
| 1
| 1
| RAM Memory Management (note 1)
|}
===== Note =====
This function is not available in the Gate-Array, but is performed by a device at the same I/O port address location. In the CPC464, CPC664 and KC compact, this function is performed in a memory-expansion (e.g. Dk'Tronics 64K RAM Expansion), if this expansion is not present then the function is not available. In the CPC6128, this function is performed by a [[PAL16L8|PAL ]] located on the main PCB, or a memory-expansion. In the 464+ and 6128+ this function is performed by the ASIC or a memory expansion. Please read the document on RAM management for more information.
==== Register 0 - Palette Index (Pen selection ==) ==
When bit 7 and bit 6 are set to "0", the remaining bits determine which pen is to have its colour changed. When bit 4 is set to "0", bits 3 to 0 define which pen is to be selected. When bit 4 is set to "1", the value contained in bits 3-0 is ignored and the border is selected.
Each mode has a fixed number of pens. Mode 0 has 16 pens, mode 1 has 4 pens and mode 2 has 2 pens.
===== Summary =====
{| class="FCK__ShowTableBorders"{{Prettytable|width: 700px; font-size: 2em;}}
|-
| ''Bit'' || ''Value'' || ''Function''
|-
| 7 || 0 || rowspan="2" | Gate Array function "Pen Selection"
|-
| 6 || 0
|-
| 5 || - || not used
|-
| 4 || 1 || Select border
|-
| 3 || x || rowspan="4" | Ignored
|-
| 2 || x
|-
| 1 || x
|-
| 0 || x
|}
<br>
{| class="FCK__ShowTableBorders"{{Prettytable|width: 700px; font-size: 2em;}}
|-
| ''Bit'' || ''Value'' || ''Function''
|-
| 7 || 0 || rowspan="2" | Gate Array function "Pen Selection"
|-
| 6 || 0
|-
| 5 || - || not used
|-
| 4 || 0 || Select pen
|-
| 3 || x || rowspan="4" | Pen number
|-
| 2 || x
|-
| 1 || x
|-
| 0 || x
|}
==== Register 1 - Palette Data (Colour selection ==) ==
Once the pen has been selected its colour can then be changed. Bits 4 to 0 specify the hardware colour number from the hardware colour palette.
Even though there is provision for 32 colours, only 27 are possible. The remaining colours are duplicates of those already in the colour palette.
===== Summary =====
{| class="FCK__ShowTableBorders"{{Prettytable|width: 700px; font-size: 2em;}}
|-
| ''Bit'' || ''Value'' || ''Function''
|-
| 7 || 0 || rowspan="2" | Gate Array function "Colour selection"
|-
| 6 || 1
|-
| 5 || - || not used
|-
| 4 || x || rowspan="5" | Colour number x
|-
| 3 || x
|-
| 2 || x
|-
| 1 || x
|-
| 0 || x
|}
==== Hardware colour palette ==== {| class="FCK__ShowTableBorders"|-| ''Colour Number'' | ''Colour Name'' | ''Color''|-| 0 | White | bgcolor="#808080" | |-| 1 | White (note 1) | bgcolor="#808080" | |-| Register 2 | Sea Green | bgcolor="#00ff80" | |-| 3 | Pastel Yellow | bgcolor="#ffff50" | |-| 4 | Blue | bgcolor="#000080" | |-| 5 | Purple | bgcolor="#ff0080" | |-| 6 | Cyan | bgcolor="#008080" | |-| 7 | Pink | bgcolor="#ff8080" | |-| 8 | Purple (note 1) | bgcolor="#ff0080" | |-| 9 | Pastel Yellow (note 1) | bgcolor="#ffff50" | |-| 10 | Bright Yellow | bgcolor="#ffff80" | |-| 11 | Bright White | bgcolor="#ffffff" | |-| 12 | Bright Red | bgcolor="#ff0000" | |-| 13 | Bright Magenta | bgcolor="#ff00ff" | |-| 14 | Orange | bgcolor="#ff8000" | |-| 15 | Pastel Magenta | bgcolor="#ff80ff" | |-| 16 | Blue (note 1) | bgcolor="#000080" | |-| 17 | Sea Green (note 1) | bgcolor="#00ff80" | |-| 18 | Bright Green | bgcolor="#00ff00" | |-| 19 | Bright Cyan | bgcolor="#00ffff" | |-| 20 | Black | bgcolor="#000000" | |-| 21 | Bright Blue | bgcolor="#0000ff" | |-| 22 | Green | bgcolor="#008000" | |-| 23 | Sky Blue | bgcolor="#0080ff" | |-| 24 | Magenta | bgcolor="#800080" | |-| 25 | Pastel Green | bgcolor="#80ff80" | |-| 26 | Lime | bgcolor="#80ff00" | |-| 27 | Pastel Cyan | bgcolor="#80ffff" | |-| 28 | Red | bgcolor="#800000" | |-| 29 | Mauve | bgcolor="#8000ff" | |-| 30 | Yellow | bgcolor="#808000" | |-| 31 | Pastel Blue | bgcolor="#8080ff" | |} ===== Notes ===== This is not an official colour. === Select screen mode and ROM configuration ===
This is a general purpose register responsible for the [[Video modes|screen mode]] and the ROM configuration.
==== Screen mode selection ====
The function of bits 1 and 0 is to define the screen mode. The settings for bits 1 and 0 and the corresponding screen mode are given in the table below.
{| class="FCK__ShowTableBorders"{{Prettytable|width: 700px; font-size: 2em;}}
|-
| ''Bit 1'' || ''Bit 0'' || ''Screen mode''
|-
| 0 || 0 || Mode 0, 160x200 resolution, 16 colours
|-
| 0 || 1 || Mode 1, 320x200 resolution, 4 colours
|-
| 1 || 0 || Mode 2, 640x200 resolution, 2 colours
|-
| 1 || 1 || Mode 3, 160x200 resolution, 4 colours (note 1undocumented)
|}
This mode * Mode 3 is not official. From the combinations possible, we can see that 4 modes can be defined, although the Amstrad only has 3. Mode 3 is similar to mode 0, because it has the same resolution, but it is limited to only 4 colours. Mode 3 is not supported by the [[KC Compact]] (which outputs black in Mode 3).
Mode changing is synchronised with HSYNC. If the mode is changed, it will take effect from the next HSYNC.
==== ROM configuration selection ====
Bit 2 is used to enable or disable the lower ROM area. The lower ROM area occupies memory addresses &amp;0000-&amp;3fff and is used to access the operating system ROM. When the lower ROM area is is enabled, reading from &amp;0000-&amp;3FFF will return data in the ROM. When a value is written to &amp;0000-&amp;3FFF, it will be written to the RAM underneath the RAM. When it is disabled, data read from &amp;0000-&amp;3FFF will return the data in the RAM.
Similarly, bit 3 controls enabling or disabling of the upper ROM area. The upper ROM area occupies memory addressess &amp;C000-&amp;FFFF and is BASIC or any expansion ROMs which may be plugged into a ROM board/box. See the document on [[Upper ROM Bank Number|upper rom selection ]] for more details. When the upper ROM area enabled, reading from &amp;c000-&amp;ffff, will return data in the ROM. When data is written to &amp;c000-&amp;FFFF, it will be written to the RAM at the same address as the ROM. When the upper ROM area is disabled, and data is read from &amp;c000-&amp;ffff it will be the data in the RAM.
Bit 4 controls the interrupt generation. It can be used to delay interrupts. See the document on interrupt generation for more information.
===== Summary =====
{| class="FCK__ShowTableBorders"{{Prettytable|width: 700px; font-size: 2em;}}
|-
| ''Bit'' || ''Value'' || ''Function''
|-
| 7 || 1 || rowspan="2" | Gate Array function
|-
| 6 || 0
|-
| 5 || - || not used
|-
| 4 || x || Interrupt generation control
|-
| 3 || x | *| 1 =Upper ROM area disable *, 0 =Upper ROM area enable 
|-
| 2 || x | *| 1 =Lower ROM area disable *, 0 =Lower ROM area enable|-| 1 || x || rowspan="2" | Screen Mode slection|-| 0 || x|}
== Register 3 - RAM Banking ==
 
This register exists only in CPCs with 128K RAM (like the CPC 6128, or CPCs with [[Standard Memory Expansions]]). Note: In the CPC 6128, the register is a separate [[PAL16L8|PAL]] that assists the Gate Array chip.
 
{|{{Prettytable|width: 700px; font-size: 2em;}}
|-
| ''Bit'' || ''Value'' || ''Function''
|-
| 7 || 1 | x | rowspan="2" | Mode slectionGate Array function 3
|-
| 6 || 1 |-| 5 || b || rowspan="3" |64K bank number (0 ..7); always 0 on an unexpanded CPC6128, 0-7 on [[Standard Memory Expansions]]|-| 4 || b|-| 3 || b|-| 2 || x || rowspan="3" | RAM Config (0..7)|-| 1 || x|-| 0 || x
|}
 
 
The 3bit RAM Config value is used to access the second 64K of the total 128K RAM that is built into the CPC 6128 or the additional 64K-512K of standard memory expansions. These contain up to eight 64K ram banks, which are selected with bit 3-5. A standard CPC 6128 only contains bank 0. Normally the register is set to 0, so that only the first 64K RAM are used (identical to the CPC 464 and 664 models). The register can be used to select between the following eight predefined configurations only:
 
-Address- 0 1 2 3 4 5 6 7
0000-3FFF RAM_0 RAM_0 '''RAM_4''' RAM_0 RAM_0 RAM_0 RAM_0 RAM_0
4000-7FFF RAM_1 RAM_1 '''RAM_5''' '''RAM_3''' '''RAM_4''' '''RAM_5''' '''RAM_6''' '''RAM_7'''
8000-BFFF RAM_2 RAM_2 '''RAM_6''' RAM_2 RAM_2 RAM_2 RAM_2 RAM_2
C000-FFFF RAM_3 '''RAM_7''' '''RAM_7''' '''RAM_7''' RAM_3 RAM_3 RAM_3 RAM_3
 
The Video RAM is always located in the first 64K, VRAM is in no way affected by this register.
== Programming the Gate Array - Examples ==
RET
</pre>
 ==== Conversion chart =Misc ===
The hardware colour number is different to the colour range used by the firmware, so a conversion chart is provided for the corresponding firmware/hardware colour values and the corresponding colour name.
===== Note =====
The firmware keeps track of the colours it is using. Every VSYNC (assuming interrupts are enabled) the firmware sets the colours. This enables the user to have flashing colours. If the user selects a new colour using the gate array, the new colour will flash temporarily and then return to its original colour. This is due to the firmware resetting the colour. When using the firmware, use its routines to select the colour, and the colour will remain.
{| class="FCK__ShowTableBorders"|-| ''Firmware Colour Number'' | ''Colour Name'' | ''Hardware Number'' | ''Quick reference colour value'' | ''Colour''|-| 0 | Black | 20 | &amp;54 | bgcolor="#000000" | |-| 1 | Blue | 4 | &amp;44 | bgcolor="#000080" | |-| 2 | Bright Blue | 21 | &amp;55 | bgcolor="#0000ff" | |-| 3 | Red | 28 | &amp;5C | bgcolor="#800000" | |-| 4 | Magenta | 24 | &amp;58 | bgcolor="#800080" | |-| 5 | Mauve | 29 | &amp;5D | bgcolor="#8000ff" | |-| 6 | Bright Red | 12 | &amp;4C | bgcolor="#ff0000" | |-| 7 | Purple | 5 | &amp;45 | bgcolor="#ff0080" | |-| 8 | Bright Magenta | 13 | &amp;4D | bgcolor="#ff00ff" | |-| 9 | Green | 22 | &amp;56 | bgcolor="#008000" | |-| 10 | Cyan | 6 | &amp;46 | bgcolor="#008080" | |-| 11 | Sky Blue | 23 | &amp;57 | bgcolor="#0080ff" | |-| 12 | Yellow | 30 | &amp;5E | bgcolor="#808000" | |-| 13 | White | 0 | &amp;40 | bgcolor="#808080" | |-| 14 | Pastel Blue | 31 | &amp;5F | bgcolor="#8080ff" | |-| 15 | Orange | 14 | &amp;4E | bgcolor="#ff8000" | |-| 16 | Pink | 7 | &amp;47 | bgcolor="#ff8080" | |-| 17 | Pastel Magenta | 15 | &amp;4F | bgcolor="#ff80ff" | |-| 18 | Bright Green | 18 | &amp;52 | bgcolor="#00ff00" | |-| 19 | Sea Green | 2 | &amp;42|-| 20 | Bright Cyan | 19 | &amp;53 | bgcolor="#00ffff" | |-| 21 | Lime | 26 | &amp;5A | bgcolor="#80ff00" | |-| 22 | Pastel Green | 25 | &amp;59 | bgcolor="#80ff80" | |-| 23 | Pastel Cyan | 27 | &amp;5B | bgcolor="#80ffff" | |-| 24 | Bright Yellow | 10 | &amp;4A | bgcolor="#ffff80" | |-| 25 | Pastel Yellow | 3 | &amp;43 | bgcolor="#ffff80" | |-| 26 | Bright White | 11 | &amp;4B | bgcolor="#ffffff" | |} This chart also gives a quick reference guide for programming the colours. The number is the colour number which can be sent directly, once the pen has been selectedExample: [For whatever reason, this example does NOT refer to get the colour wanted.  Example: above firmware stuff]
<pre>ld bc,7f00+1&nbsp;;Gate array function (set pen)
;and pen number
ret
</pre>
==== Palette R,G,B definitions ====
There are 27 colours which are generated from red, green and blue mixed in different quantities. There are 3 levels of red, 3 levels of green and 3 levels of blue, and these can be thought of as off/no colour, half-on/half-colour, and on/full-colour.
To display a CPC image you will need to use a analogue monitor with a composite sync.
This table shows the relationship between hardware colour number, colour name and RGB mixing.  <br>=== Palette sorted by Hardware Colour Numbers ===
{| class="FCK__ShowTableBorders"
|-
| ''Hardware Colour Index'' Number||Firmware Number|| ''Colour Name'' | ''R&nbsp;%'' || ''G&nbsp;%'' || ''B&nbsp;%'' || ''Colour''
|-
| 0 (40h) || 13 || White | align="right" | 50 | align="right" | 50 | align="right" | 50 || bgcolor="#808080" |
|-
| 1 (41h) || (13) || White | align="right" | 50 | align="right" | 50 | align="right" | 50 || bgcolor="#808080" |
|-
| 2 (42h) || 19 || Sea Green | align="right" | 0 | align="right" | 100 | align="right" | 50 || bgcolor="#00ff80" |
|-
| 3 (43h) || 25 || Pastel Yellow | align="right" | 100 | align="right" | 100 | align="right" | 50 || bgcolor="#ffff80" |
|-
| 4 (44h) || 1 || Blue | align="right" | 0 | align="right" | 0 | align="right" | 50 || bgcolor="#000080" |
|-
| 5 (45h) || 7 || Purple | align="right" | 100 | align="right" | 0 | align="right" | 50 || bgcolor="#ff0080" |
|-
| 6 (46h) || 10 || Cyan | align="right" | 0 | align="right" | 50 | align="right" | 50 || bgcolor="#008080" |
|-
| 7 (47h) || 16 || Pink | align="right" | 100 | align="right" | 50 | align="right" | 50 || bgcolor="#ff8080" |
|-
| 8 (48h) || (7) || Purple | align="right" | 100 | align="right" | 0 | align="right" | 50 || bgcolor="#ff0080" |
|-
| 9 (49h) || (25) || Pastel Yellow | align="right" | 100 | align="right" | 100 | align="right" | 50 || bgcolor="#ffff80" |
|-
| 10 (4Ah) || 24 || Bright Yellow | align="right" | 100 | align="right" | 100 | align="right" | 0 || bgcolor="#ffff00" |
|-
| 11 (4Bh) || 26 || Bright White | align="right" | 100 | align="right" | 100 | align="right" | 100 || bgcolor="#ffffff" |
|-
| 12 (4Ch) || 6 || Bright Red | align="right" | 100 | align="right" | 0 | align="right" | 0 || bgcolor="#ff0000" |
|-
| 13 (4Dh) || 8 || Bright Magenta | align="right" | 100 | align="right" | 0 | align="right" | 100 || bgcolor="#ff00ff" |
|-
| 14 (4Eh) || 15 || Orange | align="right" | 100 | align="right" | 50 | align="right" | 0 || bgcolor="#ff8000" |
|-
| 15 (4Fh) || 17 || Pastel Magenta | align="right" | 100 | align="right" | 50 | align="right" | 100 || bgcolor="#ff80ff" |
|-
| 16 (50h) || (1) || Blue | align="right" | 0 | align="right" | 0 | align="right" | 50 || bgcolor="#000080" |
|-
| 17 (51h) || (19) || Sea Green | align="right" | 0 | align="right" | 100 | align="right" | 50 || bgcolor="#00ff80" |
|-
| 18 (52h) || 18 || Bright Green | align="right" | 0 | align="right" | 100 | align="right" | 0 || bgcolor="#00ff00" |
|-
| 19 (53h) || 20 || Bright Cyan | align="right" | 0 | align="right" | 100 | align="right" | 100 || bgcolor="#00ffff" |
|-
| 20 (54h) || 0 || Black | align="right" | 0 | align="right" | 0 | align="right" | 0 || bgcolor="#000000" |
|-
| 21 (55h) || 2 || Bright Blue | align="right" | 0 | align="right" | 0 | align="right" | 100 || bgcolor="#0000ff" |
|-
| 22 (56h) || 9 || Green | align="right" | 0 | align="right" | 50 | align="right" | 0 || bgcolor="#008000" |
|-
| 23 (57h) || 11 || Sky Blue | align="right" | 0 | align="right" | 50 | align="right" | 100 || bgcolor="#0080ff" |
|-
| 24 (58h) || 4 || Magenta | align="right" | 50 | align="right" | 0 | align="right" | 50 || bgcolor="#800080" |
|-
| 25 (59h) || 22 || Pastel Green | align="right" | 50 | align="right" | 100 | align="right" | 50 || bgcolor="#80ff80" |
|-
| 26 (5Ah) || 21 || Lime | align="right" | 50 | align="right" | 100 | align="right" | 0 || bgcolor="#80ff00" |
|-
| 27 (5Bh) || 23 || Pastel Cyan | align="right" | 50 | align="right" | 100 | align="right" | 100 || bgcolor="#80ffff" |
|-
| 28 (5Ch) || 3 || Red | align="right" | 50 | align="right" | 0 | align="right" | 0 || bgcolor="#800000" |
|-
| 29 (5Dh) || 5 || Mauve | align="right" | 50 | align="right" | 0 | align="right" | 100 || bgcolor="#8000ff" |
|-
| 30 (5Eh) || 12 || Yellow | align="right" | 50 | align="right" | 50 | align="right" | 0 || bgcolor="#808000" |
|-
| 31 (5Fh) || 14 || Pastel Blue | align="right" | 50 | align="right" | 50 | align="right" | 100 || bgcolor="#8080ff" |
|}
===Palette sorted by Firmware Colour Numbers = RGB assignments for the software colours ==== This is simply a side note to illustrate a pattern in the RGB assignments of the software colours and to show how their value is calculated.
{| class="FCK__ShowTableBorders"
|-
| ''Firmware Colour Number'' || ''Hardware Number'' || ''Colour Name'' | ''R&nbsp;%'' || ''G&nbsp;%'' || ''B&nbsp;%'' || ''Colour''
|-
| 0 || 54h || Black | | 0 | | 0 | | 0 || bgcolor="#000000" |
|-
| 1 || 44h (or 50h) || Blue | | 0 | | 0 || 50 || bgcolor="#000080" |
|-
| 2 || 55h || Bright Blue | | 0 | | 0 || 100 || bgcolor="#0000ff" |
|-
| 3 || 5Ch || Red || 50 | | 0 | | 0 || bgcolor="#800000" |
|-
| 4 || 58h || Magenta || 50 | | 0 || 50 || bgcolor="#800080" |
|-
| 5 || 5Dh || Mauve || 50 | | 0 || 100 || bgcolor="#8000ff" |
|-
| 6 || 4Ch || Bright Red || 100 | | 0 | | 0 || bgcolor="#ff0000" |
|-
| 7 || 45h (or 48h) || Purple || 100 | | 0 || 50 || bgcolor="#ff0080" |
|-
| 8 || 4Dh || Bright Magenta || 100 | | 0 || 100 || bgcolor="#ff00ff" |
|-
| 9 || 56h || Green | | 0 || 50 | | 0 || bgcolor="#008000" |
|-
| 10 || 46h || Cyan | | 0 || 50 || 50 || bgcolor="#008080" |
|-
| 11 || 57h || Sky Blue | | 0 || 50 || 100 || bgcolor="#0080ff" |
|-
| 12 || 5Eh || Yellow || 50 || 50 | | 0 || bgcolor="#808000" |
|-
| 13 || 40h (or 41h) || White || 50 || 50 || 50 || bgcolor="#808080" |
|-
| 14 || 5Fh || Pastel Blue || 50 || 50 || 100 || bgcolor="#8080ff" |
|-
| 15 || 4Eh || Orange || 100 || 50 | | 0 || bgcolor="#ff8000" |
|-
| 16 || 47h || Pink || 100 || 50 || 50 || bgcolor="#ff8080" |
|-
| 17 || 4Fh || Pastel Magenta || 100 || 50 || 100 || bgcolor="#ff80ff" |
|-
| 18 || 52h || Bright Green | | 0 || 100 | | 0 || bgcolor="#00ff00" |
|-
| 19 || 42h (or 51h) || Sea Green | | 0 || 100 || 50 || bgcolor="#00ff80" |
|-
| 20 || 53h || Bright Cyan | | 0 || 100 || 100 || bgcolor="#00ffff" |
|-
| 21 || 5Ah || Lime || 50 || 100 | | 0 || bgcolor="#80ff00" |
|-
| 22 || 59h || Pastel Green || 50 || 100 || 50 || bgcolor="#80ff80" |
|-
| 23 || 5Bh || Pastel Cyan || 50 || 100 || 100 || bgcolor="#80ffff" |
|-
| 24 || 4Ah || Bright Yellow || 100 || 100 | | 0 || bgcolor="#ffff00" |
|-
| 25 || 43h (or 49h) || Pastel Yellow || 100 || 100 || 50 || bgcolor="#ffff80" |
|-
| 26 || 4Bh || Bright White || 100 || 100 || 100 || bgcolor="#ffffff" |
|}
=== Intensities === The 0%, 50%, and 100% values in the above tables are "should-be" values. However, the real hardware doesn't exactly match that intensities. The actual intensities depend on the luminance mixing (R,G,B tied together via resistors), on chipset (classic CPC, or newer ASIC ones), and on the load applied by external hardware (Monitor, or TV set).* [[CPC Palette]] - some more details === To calculate the colour value =====
'''Red'''
100% =&gt; add 2
=== Green Screen Colours ===
On a green screen (where all colours are shades of green), the colours (in the software/firmware colours), are in order of increasing intensity. Black is very dark, and white is bright green, and colour 13 is a medium green. (Thanks to [[Mark Rison|Mark Rison]] for this information)
==LinksPictures == <gallery>Image:40010_am2_metal.jpg|40010 GA Metal LayerImage:40010_am2_acid.jpg|40010 GA with Metal Layer removedImage:40226_am4_metal.jpg|40226 PreASIC Metal Layer</gallery> ==See also== *[[Gate Array and ASIC Pin-Outs]]
*[[Video modes]] : for other informations on colours and pixels.
*[[Synchronising with the CRTC and display]] : technical details on the relationship between Gate Array and CRTC.
* [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/gate-array-decapped!/msg170713/#msg170713 Gate Array schematics - reverse engineered by Gerald] == External links ==* [https://www.grimware.org/doku.php/documentations/devices/gatearray Gate Array documentation from Grimware]* [http://quasar.cpcscene.net/doku.php?id=assem:gate_array Quasar Gate Array documentation (in french)] [[Category:Hardware]][[Category:Programming]][[Category:Datasheet]][[Category:Graphic]][[Category:CPC Internal Components]][[Category:Electronic Component]]
Eto
144
edits
Retrieved from "https://www.cpcwiki.eu/index.php/Special:MobileDiff/33681...114526"