Changes
/* Commands to control LambdaSpeak III */
|LSINIT: Initializes the LambdaSpeak III when using the LambdaSpeak III ROMs. The following steps are carried out:
The passing of parameters is switched to 'fast' (using |GETFAST), the language is set to '''English ''' (|ENGLISH), the Blocking is set to OFF (|BLOCKOFF), the mode is set to Epson (|LAMBDA) and the speech delay is set to a minimum (20 ms) (|SETDELAY,1).
|LSINIC: Initializes the LambdaSpeak III when using the LambdaSpeak III ROMs. The following steps are carried out:
The passing of parameters is switched to 'fast' (using |GETFAST), the language is set to '''Spanish ''' (|SPANISH), the Blocking is set to OFF (|BLOCKOFF), the mode is set to Epson (|LAMBDA) and the speech delay is set to a minimum (20 ms) (|SETDELAY,1).
|RESET.: This is like to switch OFF and ON the LambdaSpeak III. It switches LambdaSpeak III into the dk'tronics mode.
To load 48 KB from the EEPROM 96 pages will be read.
Attention: You must use |LSINIT or |LSINIC first, else the CPC hangs!
=== Hardware of the LambdaSpeak III ===
