Changes

=How to Decode the CPC serial number=  This legend will help you define the month and year your CPC rolled out of the factory, as well as the factory itself.  There are two main types of serial number on the back of CPC:*The first type is located on a small white label. Format is "123456 Kxx-yy"*The second type is shown directly on the main label and consists of ten digits.  <u>Interpretation of the first type:</u> "123456 Kxx-yy"*K is the country of production (K for Korea - South Korea)*Xx is the plant (31 or 32 are the two codes that typically found).*Yy is the year and month of leaving the factory. First digit represents the year (4 for 1984, 5 for 1985), second digit represents the month (1 through 9 = January-September, X, Y and Z= October, November and December)*Finally, the 6-digit number is the actual serial production sequence number fr that factory and year Examples: *93132 K32-54 => Korea factory 32 - April 1985 (a 664)*218 167 K32-5X => Korea Factory 31 - October 1985 (a 6128)*16201 K31-62 => Korea factory 31 - February 1986 (464) This numbering was used until February 1986. It relates to a package of 464, 664 and every part of 6128. <u>Interpretation of the 2nd type:</u> 10 digits (often with a dash between the 3rd and 4th digits)*1st digit country code (5 for Korea, Thailand for 6)*2nd and 3rd digit = plant code (found: 31 and 32 but also 33, 35, 41 and 71 for Thailand)*4th and 5th digits (possibly preceded by a hyphen) = production date (year and month as in the previous system)*5-end correspond to the sequence number of the chain of production (per site per month now) Examples: *5326604065 => Korea Factory 31 - June 1986 (it's a 6128)*533-7316093 => Korea Factory 31 - March 1987 (it's a 464)*671-9408078 => Thailand Factory 71 - April 1989 (it's a 6128)  =PCB Markings=There are some markings on some boards that denote the materials used to build the board or adherence to certain standards. ==UL94 Flammability testing standard==The standard determines the material’s tendency to either extinguish or spread the flame once the specimen has been ignited. Classifications from lowest (Least flame-retardant) to highest (Most flame-retardant): * HB: slow burning on a horizontal specimen; burning rate < 76 mm/min for thickness < 3 mm or burning stops before 100 mm* V-2: burning stops within 30 seconds on a vertical specimen; drips of flaming particles are allowed.* V-1: burning stops within 30 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed.* V-0: burning stops within 10 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed.* 5VB: burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may develop a hole.* 5VA: burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may not develop a hole. So, a board with a 94V-0 marking is supposed to stop burning after 10 seconds and may drip non-inflamed particles. Please visit the [https://en.wikipedia.org/wiki/UL_94 Wikipedia page] on the UL94 standard for more information. ==NEMA grade designations==[https://www.nema.org NEMA (National Electrical Manufacturers Association)] is the largest trade association of electrical equipment manufacturers in the United States, and publishes standards for electrical products. One of these standards is the Insulating Material Standard, which includes designation for flame retardant materials (FR), like the ones the PCBs are made of. Examples of NEMA designations include the following:* FR-2 : Synthetic resin bonded paper. ([https://en.wikipedia.org/wiki/FR-2 Wikipedia FR-2])* FR-4 : Glass-reinforced epoxy laminate material, typically employing bromine as flame retardant. ([https://en.wikipedia.org/wiki/FR-4 Wikipedia FR-4]) For information on the different substrates used in PCB manufacturing, please check this [https://en.wikipedia.org/wiki/Printed_circuit_board#Common_substrates Wikipedia page]. ==Material codes==There are other codes referring also to materials and their properties, please check the table below: [[File:UL_Material_Standards.png|600px]] ==Other markings==There are some boards which have some combinations of letters and numbers surrounded by white dot patterns: [[File:PCB_White_Dot_Marking.png]] These may be production line identification markings for quality control. =Boards=== CPC464 version 1 0 Prototype == {|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || ''Composite (originalor X-Ray) view'' || Description|-|[[File:CPC464_V0_PCB_Top.jpg|200px]] || [[File:CPC464_V0_PCB_Bottom.jpg|200px]] || [[File:CPC464_V0_PCB_Composite_View.jpg|200px]] || '''Board: Version 0 Prototype'''<br>This board is the original prototype of the CPC and has a 6502 processor instead of the Z80.<br>Courtesy of Roland Perry. Original pictures by Deepfb.|-|} == CPC464 Prototype ==

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:CPC464 Z70100 TomdalbyGA motherboard.jpgJPG|200px]] |left| || '''Board: Prototype with Gate Array Simulator''' ([[CPC Prototypes|more pictures]])<br>The Gate Array Simulator board (mounted on top of the mainboard, and almost having the same size as the mainboard) contains four 8K EPROMs, and a Gate Array prototype made of several logic chips.<br>In later versions these evolved into a normal 28pin 32K ROM chip, and the custom 40pin Gate Array chip.* |-|[[File:CPC464_Prototype_Z70100_PCB_Top.jpg|200px]] || [[File:CPC464_Prototype_Z70100_PCB_Bottom.jpg|200px]] || '''Board: PT NO Z70100, without any "MCnnnn" code, Copyright 1983Prototype'''* Original version<br>Board found along the Gate Array simulator on the "Grey Amstrad" prototype machine. Real wires going to keyboard<br>Pictures courtesy of Jorge Selfa.|-|[[File:GateArraySimulator_13006-7_PCB_Top.jpg|200px]] || [[File:GateArraySimulator_13006-7_PCB_Bottom.jpg|200px]] || '''Board: Gate Array Simulator 13006/7'''<br style="clear:both;">Pictures courtesy of Jorge Selfa.|-|}

[[File:== CPC464 Z70100 MC0001A RobertoCarlos.jpg|200px|left]]* '''Board: PT NO Z70100, MC0001A, Copyright 1983'''* Keyboard connector now has two rows of soldering points; probably intended to support two different connectors: The old PCB keyboard with wires, and the new CPC664-style 19pin single-foil "membrane" keyboard.<br styleversion 1 (original) =="clear:both;">

[[File:CPC464 270100 Grimware_crop.jpg|200px|left]]* '''BoardSize: PT NO 270100, MC0001A, Copyrigh 1983405x155 mm'''* Same as "Z70100 MC0001A"Big mainboard, but old Gate Array with uncommon text layer: labeled "270100" (not "Z70100")cooling plate and with VCC2; supplied from VCC via two 12 ohm resistors, says "Copyrigh" R138 and R139, which are seen (not "Copyright"with white coating), and, unlike all other boards, its text has slashed zeroesnear the cooling plate.<br style="clear:both;">

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:GA motherboardCPC464_PCB_Top_(Z70100)_GA40007-4.JPGjpg|200px]] |left| [[File:CPC464_PCB_Bottom_(Z70100)_GA40007-4.jpg|200px]]* || '''Board: Prototype with Gate Array SimulatorPT NO Z70100, without any "MCnnnn" code, Copyright 1983''' (<br>Original version. Real wires going to keyboard.<br> [[CPC PrototypesMedia:CPC464 Z70100 Tomdalby.jpg|more picturesanother picture]]).* The Gate Array Simulator board (mounted on top of the mainboard|-|[[File:CPC464_270100_MC0001A_PCB_Top.jpg|200px]] || [[File:CPC464_270100_MC0001A_PCB_Bottom.jpg|200px]] || '''Board: PT NO 270100, and almost having the same size MC0001A, Copyrigh 1983'''<br>Same as the mainboard"Z70100 MC0001A", but with uncommon text layer: labeled "270100" (not "Z70100") contains four 8K EPROMs, and a Gate Array prototype made of several logic chips. In later versions these evolved into a normal 28pin 32K ROM chip<br>says "Copyrigh" (not "Copyright"), and the custom 40pin Gate Array chip, unlike all other boards, its text has slashed zeroes.<br> [[Media:CPC464 270100 Grimware_crop.jpg|another picture]].|-|[[File:CPC464_Z70100_MC0001A_PCB_Top.jpg|200px]] ||[[File:CPC464_Z70100_MC0001A_PCB_Bottom.jpg|200px]] || '''Board: PT NO Z70100, MC0001A, Copyright 1983'''<br >Keyboard connector now has two rows of soldering points; probably intended to support two different connectors:<br>The old PCB keyboard with wires, and the new CPC664-style=19pin single-foil "clear:both;membrane"keyboard.<br>More Pictures [[Media:CPC464 Z70100 MC0001A RobertoCarlos.jpg|here]], [[Media:Z70100_MC0001A_TOP.jpg|here]] and [[Media:Z70100_MC0001A_BOT.JPG|here]].|-|}

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:CPC 464 MC0002B bilgisayarlarimMC0001A-v2-components.jpg|200px]] |left| [[File:MC0001A-v2-solders.jpg|200px]]|| '''Board: PT NO Z70200, MC0001A, Copyright 1984'''<br>Here's a picture of the gate array under the cooling plate and [[Media:Robcfg CPC464 EN 07.jpg|cooling paste]] removed.<br>Other pictures [[Media:Z70200_MC0001A_TOP.JPG|here]] and [[Media:Z70200_MC0001A_BOT.JPG|here]].* |-|[[File:Amstrad_CPC464_Z70200_MC0002A_PCB_Top.jpg|200px]] || [[File:Amstrad_CPC464_Z70200_MC0002A_PCB_Bottom.jpg|200px]] || '''Board: PT NO Z70200, MC0002BMC0002A, Copyright 1984'''<br>The 40009 chip was removed from the board.* |-|[[File:CPC464_PCB_Top_(Z70200_MC0002B).jpg|200px]] || [[File:CPC464_PCB_Bottom_(Z70200_MC0002B).jpg|200px]] || '''Board: PT NO Z70200, MC0002B, Copyright 1984'''<br>The cooling plate and [[Media:Robcfg CPC464 EN 07.jpg|cooling paste]] are removed on the photo, revealing the normally hidden 40007-4 gate array chip<br style="clear:both;">([[Media:CPC 464 MC0002B bilgisayarlarim.jpg|Another picture]])|-|[[File:Colossus CPC472 mainboardCPC464_PCB_Top_(Z70200_MC0002C).jpg|200px]] |left| [[File:CPC464_PCB_Bottom_(Z70200_MC0002C).jpg|200px]]* || '''Board: PT NO Z70200, MC0002C, Copyright 1984 with MS0043A daughterboard''' <br>Notice that the 472 board below uses other Gate Array model but the board is the same.<br>([[472Media:LeZone_464_pcb_MC0002C.jpg|(more pictures)Another picture]])* The Spanish |-|[[472File:CPC464_Board PT NO Z70200, MC0002C, Copyright 1984_GA40010.jpg|CPC472200px]]|| || '''Board: PT NO Z70200, with nonfunctional 8K RAM on the daughterboardMC0002C, Copyright 1984'''<br style="clear:both;">40010 Gate Array. This board was in an Australian Awa 464.|-|[[File:CPC464_PCB_Top_(Z70200_MC0002D).jpg|200px]] || [[File:CPC464_PCB_Bottom_(Z70200_MC0002D).jpg|200px]] || '''Board: PT NO Z70200, MC0002D, Copyright 1984'''<br> [[Media:CPC464 Z70200 Tomdalby.jpg|another picture]].|-|[[File:CPC464_PCB_Top_(Z70200_MC0002D)_GA40008.jpg|200px]] |left| [[File:CPC464_PCB_Bottom_(Z70200_MC0002D)_GA40008.jpg|200px]]* || '''Board: PT NO Z70200, MC0002D, Copyright 1984'''<br style="clear:both;">With Gate Array 40008. Notice also that the board is fitted with resistors R138 and R139.|-|[[File:Nightfallcrew CPC464 french azerty Z70200 MC0008D pcbAmstrad_CPC464_Z70200_MC0003A_PCB_Top.jpg|200px]] |left| [[File:Amstrad_CPC464_Z70200_MC0003A_PCB_Bottom.jpg|200px]] || '''Board: PT NO Z70200, MC0003A, Copyright 1984'''<br>English board with original 'Tall Key' keyboard connector only.<br>[[Media:Amstrad_CPC464_MC0003A_mainboard.jpg|Picture from an eBay UK CPC464 for sale ad.]]* |-|[[File:MC0008B-M2-Schneider464-K31-57_Willow3411.jpg|200px]] || || '''Board: PT NO Z70200, MC0008DMC0008B, Copyright 1984'''<br>Schneider board with shielding plates, and additional filtering loops.<br>Without old 19pin keyboard connector.<br>Picture courtesy of Willow3411.* French |-|[[File:CPC464_Z70200_MC0008C_PCB_Top.jpg|200px]] || [[File:CPC464_Z70200_MC0008C_PCB_Bottom.jpg|200px]] || '''Board: PT NO Z70200, MC0008C, Copyright 1984'''<br>Schneider board with shielding plates, and additional filtering loops.<br>Without old 19pin keyboard connector.<br> [[Media:CPC464_PCB_Top_(Z70200_MC0008C).jpg|Another picture]].|-|[[File:MC0008D_Z70200_LeZone_PCB_Top.jpg|200px]] || [[File:MC0008D_Z70200_LeZone_PCB_Bottom.jpg|200px]] || '''Board: PT NO Z70200, MC0008D, Copyright 1984'''<br>French board with shielding plates and french French AZERTY romROM.* <br>Without old 19pin keyboard connector.<br style="clear:both;">[[Media:Nightfallcrew CPC464 french azerty Z70200 MC0008D pcb.jpg|Another picture.]]|-|}

* Can be optionally fitted with Amphenol connectors (instead of Edge connectors, as far as known, this option was never used for the 464). The screw-holes have contacts for optional shielding-plate (this option was used in german German Schneider models).

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:CPC464 Z70374 Grimware.jpg|120px]] |left| ||'''Board: PT NO Z70374, MC0044A'''|-|[[File:CPC464_MC0044B_PCB_Top.jpg|120px]] ||[[File:CPC464_MC0044B_PCB_Bottom.jpg|120px]] ||'''Board: PT NO Z70374, MC0044B'''<br>More pictures [[Media:CPC464 Z70374 MC0044B cpcmania.jpg|here]] and [[Media:LeZone_464_pcb_MC0044B.jpg|here]]* |-|[[File:CPC464_PCB_Top_(Z70375_MC0044D).jpg|120px]] ||[[File:CPC464_PCB_Bottom_(Z70375_MC0044D).jpg|120px]] || '''Board: PT NO Z70375, MC0044D'''<br>Mostly same as Z70374. The 3 resistors in upper-right are arranged differently, MC0044Adifferent cassette connector installed, tinned GND fields.<br>[[Media:CPC464 Z70375 Tomdalby.jpg|Another picture]]|-|[[File:AmstradCPC464_Z70375_MC0044D_GA40010_PCB_Top.jpg|120px]] || [[File:AmstradCPC464_Z70375_MC0044D_GA40010_PCB_Bottom.jpg|120px]] || '''Board: PT NO Z70375, MC0044D'''<br>Same board as above but with a 40010 Gate Array.<br>Note that this board has been repaired.|-|[[File:464-MC0046A-GA40007.jpg|120px]] || ||'''Board: PT NO Z70378, MC0046A'''<br>Additional filtering loops near cassette, monitor, keyboard connectors. Used in German Schneider models.<br>[[Media:CPC464_PCB_Top_(Z70378_MC0046A)_4007GA.JPG|Another picture]].|-|[[File:CPC464 PCB Top (Z70378 MC0046A).jpg|120px]] ||[[File:CPC464_PCB_Bottom_(Z70378_MC0046A).jpg|120px]] || '''Board: PT NO Z70378, MC0046A'''<br>Same board as above but with a 40010 Gate Array. Additional filtering loops near cassette, monitor, keyboard connectors.<br>Used in German Schneider models.[[Media:CPC464 MC0046A Markus top.jpg| Another picture]]|-|[[File:SpanishSchneider464 robcfg cpcmaniaco shielding.jpg|120px]] || ||'''Shielding as found in German Schneider models'''|-|}

[[File:== CPC464 Z70374 MC0044B cpcmania.jpg|120px|left]]* '''Board: PT NO Z70374, MC0044B'''<br styleversion 4 (cost-down) =="clear:both;">

* '''Size: 237x108 mm'''{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[FileImage:CPC464 Z70375 TomdalbyCPC464_PCB_Top_(Z80329_MC0099A).jpg|120px]] |left| [[Image:CPC464_PCB_Bottom_(Z80329_MC0099A).jpg|120px]]* || '''Board: PT NO Z70375Z80329, MC0044DMC0099A, Copyright 1988'''* Mostly same as Z70374<br>Tiny mainboard. The 3 resistors in upper-right are arranged differentlyUses 100pin SMD Gate Array (combines the old Gate Array, different cassette connector installedCRTC, tinned GND fieldsand some FDC/DRAM/RESET logic in one chip).<br style="clear>Here is [[Media:both;"CPC464 MC0099A.jpg|another picture]].|-|[[Image:Amstrad_CPC464_MC0099A_2x41464_Ram_PCB_Top_LeZone.jpg|120px]] || || '''Board: PT NO Z80329, MC0099A, Copyright 1988'''<br>MC0099A board fitted with 2x41464 (64Kx4 bits) chips instead of 8x4164 (64Kx1 bit) chips.|-|}

[[File:CPC464 MC0046A Markus top.jpg|120px|left]]* '''Board: PT NO Z70378, MC0046A'''* Additional filtering loops near cassette, monitor, keyboard connectors. Used in german Schneider models.<br style="clear:both;">= CPC472 ==

[[File:SpanishSchneider464 robcfg cpcmaniaco shielding.jpg|120px|left]]* '''Shielding as found in german Schneider modelsSize: 405x155 mm'''<br style="clear:both;">

== CPC464 version 4 (cost{|{{Prettytable|width: 700px; font-down) ==size: 2em;}} * |''PCB Top'Size: 237x108 mm'||''PCB Bottom'' || Description|-|[[ImageFile:CPC464 MC0099AMC0002C-CPC472-components.jpg|120px200px]] |left| [[File:MC0002C-CPC472-solders.jpg|200px]]* || '''Board: PT NO Z80329Z70200, MC0099AMC0002C, Copyright 19881984 with MS0043A daughterboard'''* Tiny mainboard. Uses 100pin SMD Gate Array [[472|(combines more pictures)]]<br>The Spanish [[472|CPC472]], with nonfunctional 8K RAM on the old Gate Arraydaughterboard|-|[[File:CPC472_Z70200_MC0002D_PCB_Top.jpg|200px]] || [[File:CPC472_Z70200_MC0002D_PCB_Bottom.jpg|200px]] || '''Board: PT NO Z70200, CRTCMC0002D, and some FDC/DRAM/RESET logic in one chipCopyright 1984 with MS0043A daughterboard''' [[472|(more pictures).]]<br style="clear:both;">The Spanish [[472|CPC472]], with nonfunctional 8K RAM on the daughterboard|-|}

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:CPC664 PCB Top.jpg|240px]] |left| [[File:CPC664_PCB_Bottom.jpg|240px]]* || '''Board: PT NO Z70205, MC0005A'''* <br>8pin FDC Data Separator<br style="clear:both;">|-|[[File:German Schneider CPC664 open Gryzor missing edgeCPC664_Z70205_MC0005B_PCB_Top.jpg|240px]] |left| [[File:CPC664_Z70205_MC0005B_PCB_Bottom.jpg|240px]]* || '''Board: PT NO Z70205, MC0005B'''* <br>Another 664 version, found in german German Schneider CPCs (but might be also used in other countries?)* <br>This board version typically includes a small patch: A resistor soldered between Pin9 (A0) and Pin14 (/CASADDR) of IC105. <br>The patch is also seen [http://amstrad.cpc.free.fr/amstrad/cpc664_e.htm here]. <br>The resistor is labeled as R160 in the schematic, but isn't labeled on the PCB, so it was apparently added after designing the PCB.<br style="clear:both;">Here is [[Media:German Schneider CPC664 open Gryzor missing edge.jpg|another picture]].|-|}

* '''Size: <span style="color:#ff0000">???x???</span> 320x155 mm'''

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:CPC6128 Z70210 TomdalbyCPC6128_PCB_Top_(Z70210_MC0009A).jpg|160px]] |left| [[File:CPC6128_PCB_Bottom_(Z70210_MC0009A).jpg|160px]]* || '''Board: PT NO Z70210, MC0009A'''* <br>Separate soldering points for old and new Gate Array (as far as known, the old Gate Array was never used in 6128 though, only in 464).* <br>8pin FDC Data Separator.* <br>Can be fitted with Amphenol connectors (as used in german cpcsGerman CPCs) (instead of edge connectors).<br>Here's [[Media:CPC6128 Z70210 Tomdalby.jpg|another picture]].|-|[[File:MC0009B_Top.jpg|160px]] || [[File:MC0009B_Bottom.jpg|160px]] || '''Board: PT NO Z70210, MC0009B'''<br style="clear>Separate soldering points for old and new Gate Array.|-|[[File:both;"CPC6128_PCB_Top_(Z70210_MC0009C).jpg|160px]]||[[File:CPC6128_PCB_Bottom_(Z70210_MC0009C).jpg|160px]]|| '''Board: PT NO Z70210, MC0009C'''<br>Separate soldering points for old and new Gate Array.|-|[[File:CPC6128_PCB_Top_(Z70210_MC0012A).jpg|160px]] || [[File:CPC6128_PCB_Bottom_(Z70210_MC0012A).jpg|160px]] || '''Board: PT NO Z70210, MC0012A Centronics Version'''<br>Separate soldering points for old and new Gate Array.<br>Here's [[Media:PCB70210german.jpg|Another picture]].|-|[[File:CPC6128_PCB_Top_(Z70210_MC0012B).jpg|160px]] || [[File:CPC6128_PCB_Bottom_(Z70210_MC0012B).jpg|160px]] || '''Board: PT NO Z70210, MC0012B Centronics Version'''<br>Separate soldering points for old and new Gate Array.|-|[[File:CPC6128_MC0016A_PCB_Top_Noel_Llopis.jpg|160px]] || [[File:CPC6128_MC0016A_PCB_Bottom_Noel_Llopis.jpg|160px]] || '''Board: PT NO Z70270, MC0016A Centronics Version'''<br>Separate soldering points for old and new Gate Array.<br>Courtesy of Noel Llopis.|}

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:CPC6128_PCB_Top_(Z70290_MC0020BZ70290_MC0020A).jpg|160px]] |left| [[File:CPC6128_PCB_Bottom_(Z70290_MC0020A).jpg|160px]]|| '''Board: PT NO Z70290, MC0020A, ECMKI-94HB, Copyright 1985'''* |-|[[File:CPC6128_PCB_Top_(Z70290_MC0020B).jpg|160px]] || [[File:CPC6128_PCB_Bottom_(Z70290_MC0020B).jpg|160px]] || '''Board: PT NO Z70290, MC0020B, R1706-94HB, Copyright 1985'''* <br>Can be fitted with Amphenol connectors (done in germanyGermany) (instead Edge connectors).* <br>Uses 24pin FDC Data Separator.* <br>Here's also [[Media:CPC6128 Z70290 Yarek.jpg|another picture]].|-|[[File:CPC6128_Z70290_MC0020C_PCB_Top.jpg|160px]] ||[[File:CPC6128_Z70290_MC0020C_PCB_Bottom.jpg|160px]] || '''Board: PT NO Z70290, MC0020C, Copyright 1985'''<br style="clear:both;">[[Media:CPC6128_PCB_Top_(Z70290_MC0020C).jpg|Another picture]]|-|[[File:CPC6128 MC00201 RobertoCarlosCPC6128_PCB_Top_(Z70290_MC0020F).jpg|160px]] |left| [[File:CPC6128_PCB_Bottom_(Z70290_MC0020F).jpg|160px]]|| '''Board: PT NO Z70290, MC0020F, Copyright 1985'''* |-|[[File:CPC6128_PCB_Top_(Z70290_MC0020F_ELC4970_94V0).jpg|160px]] ||[[File:CPC6128_PCB_Bottom_(Z70290_MC0020F_ELC4970_94V0).jpg|160px]] || '''Board: PT NO Z70290, MC0020IMC0020F, ELC4970 94V.0-FR-40, Copyright 1985'''<br style="clear:both;">[[Media:CPC6128_PCB_Top_(Z70290_MC0020F_ELC4970_94V-0).jpg|Another picture]]|-|[[File:NightfallcrewSchneider6128pcbCPC6128_PCB_Top_(Z70290_MC0020G).jpg|160px]] |left| [[File:CPC6128_PCB_Bottom_(Z70290_MC0020G).jpg|160px]]* || '''Board: PT NO Z70290, MC0023DMC0020G, 94HBCopyright 1985'''|-R1706|[[File:Z70290_MC0020H_PCB_Top.jpg|160px]] || [[File:Z70290_MC0020H_PCB_Bottom.jpg|160px]] || '''Board: PT NO Z70290, MC0020H, Copyright 1985'''* Sold in germany, with Amphenol connectors (and dummy edge|-connectors which don|[[File:CPC6128_PCB_Top_(Z70290_MC0020I).jpg|160px]] || [[File:CPC6128_PCB_Bottom_(Z70290_MC0020I).jpg|160px]] || 't have any contacts''Board: PT NO Z70290, and which are covered by green solderMC0020I, 94V.0-stop layerFR-4, seen on Copyright 1985'''<br>Here's also [[Media:NightfallcrewSchneider6128pcb bottomCPC6128 MC00201 RobertoCarlos.jpg|bottom sideanother picture]].|-|[[File:CPC6128_PCB_Top_(Z70290_MC0023D).jpg|160px]] || [[File:CPC6128_PCB_Bottom_(Z70290_MC0023D).jpg|160px]] || '''Board: PT NO Z70290, MC0023D, 94HB-R1706, Copyright 1985'''<br>Sold in Germany, with Amphenol connectors, front of mainboard has several vias for giving better contact to shielding plate).* Note: The via in the text makes it easy to misread the part number (it's Z70290, not Z70250).<br style="clear:both;">More pictures [[Media:NightfallcrewSchneider6128pcb.jpg|here]] and [[Media:NightfallcrewSchneider6128pcb bottom.jpg|here]].|-|[[File:NoPictureAmstrad_CPC6128_MC0023F_LeZone_PCB_Top.pngjpg|100px160px]] |left| [[File:Amstrad_CPC6128_MC0023F_LeZone_PCB_Bottom.jpg|160px]]* || '''Board: PT NO Z70290, MC...?MC0023F, 94...?94HB-R1706, Copyright 1985'''* Looks ''almost'' like <br>[[Media:Amstrad_CPC6128_MC0023F_LeZone_MC_Code_Detail.jpg|Detail shot of the above german board, but the "94HBMC code]].|-R1706" is different* http|[[File://www.1000bit.it/scheda.asp?id=30 CPC6128_PCB_Top_(not perfect picture quality; and board numbers are hidden under shielding plate and capacitorsZ70290_MC0023G)* EDIT.jpg|160px]] || [[File: There CPC6128_PCB_Bottom_(Z70290_MC0023G).jpg|160px]] || ''was'' a picture of that board - but now it's replaced by better picture, but now showing a totally different 6128 board Board:PT NO Z70290, MC0023G, 94HB-/R1706, Copyright 1985'''<br style="clear:both;">Fitted with Amphenol connectors, and with an English ROM.|-|[[File:Schneider6128shieldingCPC6128_PCB_Top_(Z70290_MC0026B).jpg|160px]] |left| [[File:CPC6128_PCB_Bottom_(Z70290_MC0026B).jpg|160px]]* || '''Shielding as found in german Schneider modelsBoard: PT NO Z70290, MC0026B, 94V0-ECMM1, Copyright 1985'''<br style="clear:both;">Fitted with Amphenol connectors.<br>It has some weird resistors directly below the video connector, and an extra ferrite ring by the audio jack.|-|[[File:CPC6128 Z70290 MC0057A with cooling plate cpcmaniaCPC6128_PCB_Top_(Z70290_MC0057A).jpg|160px]] |left| [[File:CPC6128_PCB_Bottom_(Z70290_MC0057A).jpg|160px]]* || '''Board: PT NO Z70290, MC0057A, Copyright 1985'''* <br>An uncommon version. The cooling plate suggests that this CPC 6128 board would be downgraded for supporting the pin-outs of the old gate array. Most bizarre, the The /INT resistor, R144, has white coatingcovering to protect it from heat generated by the Gate-Array, seen at lower-left edge of the cooling plate. On 464 boards similar coating covering is used on VCC2 resistors. Most likely, this board is a homebrew joke, modded to fool other people.<br style="clear:both;">Here's also [[Media:CPC6128 Z70290 MC0057A with cooling plate cpcmania.jpg|another picture]].|-|[[File:Schneider6128shielding.jpg|160px]] || || '''Shielding as found in German Schneider models'''|-|}

* '''Size: <span style="color:#ff0000">???x???</span> 310x145 mm'''

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:CPC6128 Z80330 YarekCPC6128_PCB_Top_(Z80330_MC0100A).jpg|160px]] |left| [[File:CPC6128_PCB_Bottom_(Z80330_MC0100A).jpg|160px]]* || '''Board: PT NO Z80330, MC0100A (1988)'''* <br>Uses 100pin SMD Gate Array (combines the old Gate Array and PAL, CRTC, and some FDC/DRAM/RESET logic in one chip).* <br>Can be fitted with four 64Kx4 RAM chips (or the normal sixteen 64Kx1 RAM chips)* <br>Printer port consists of 74LS174+74LS175 (instead of 74LS273)<br style="clear:both;">More pictures [[Media:CPC6128 Z80330 Yarek.jpg|here]] and [[Media:CPC6128_PCB_Top_(Z80330_MC0100A)_VincentGR.jpg|here]].|-|}

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:Terje 464CPC464Plus_MC0122B_2700-MC0122B016P-63_PCB_Top.jpg|141px]] |left| [[File:CPC464Plus_MC0122B_2700-016P-3_PCB_Bottom.jpg|141px]]* || '''Board: 2700-016P-3, MC0122B, Copyright 1990'''<br style="clear:both;">IC16 is 74HCT02 with two extra resistors between pins 2+14 and 3+4<br>extra diodes near R71-R75 (below right edge of expansion port)<br>([[Media:Terje 464-MC0122B-6.jpg|other picture]])|-|[[File:Terje 464-MC0122C-7 unrotated.jpg|141px|left]]* || || '''Board: 2700-016P-3, MC0122C, Copyright 1990'''<br style="clear:both;">IC16 is 74LS27 without extra resistors<br>other extra diodes near R71-R75, and R73 is not installed|-|[[File:CPC464Plus MC0122D NightfallCrew.jpg|141px|left]]* || || '''Board: 2700-016P-3, MC0122D, Copyright 1990'''<br style=>New D29/D30 (instead of the "clear:both;extra">diodes near R71-R75)|-|}

* Uses 160pin SMD Gate Array (ASIC), and 24pin data separator.

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[Image:Gerald CPC6128Plus 1990 2700CPC6128Plus_MC0122C_2700-016P-3 MC0122C3_PCB_Top.jpg|141px]] |left| [[Image:CPC6128Plus_MC0122C_2700-016P-3_PCB_Bottom.jpg|141px]]* || '''Board: 2700-016P-3, MC0122C, Copyright 1990''' <br>([[Media:Terje 6128-MC0122C-7 unrotated.jpg|other picture]])<br style="clear([[Media:both;">Gerald CPC6128Plus 1990 2700-016P-3 MC0122C.jpg|other picture]])|-|[[Image:CPC6128Plus_MC0122D_2700-016P-3_PCB_Top.jpg|141px]] || [[Image:CPC6128Plus_MC0122D_2700-016P-3_PCB_Bottom.jpg|141px]] || '''Board: 2700-016P-3, MC0122D, Copyright 1990'''<br>([[Media:Terje 6128-MC0122D-9 unrotated.jpg|141px|leftother picture]])* |-|[[Image:LeZone_Amstrad_6128plus_FR_Azerty_-_MFRS_G_-_MC0122E_v10.jpg|141px]] || || '''Board: 2700-016P-3, MC0122DMC0122E, Copyright 1990'''<br style="clear:both;">|-|}

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:GX4000_PCB_Top_(2700-017P-3_MC0123A_K2).jpg|100px]] || [[File:GX4000_PCB_Bottom_(2700-017P-3_MC0123A_K2).jpg|100px]] || '''Board: 2700-017P-3, MC0123A, Copyright 1990, K2'''|-|[[File:GX4000_PCB_Top_(2700-017P-3_MC0123A_K2)_NoMod.jpg|100px]] || [[File:GX4000_PCB_Bottom_(2700-017P-3_MC0123A_K2)_NoMod_.jpg|100px]] || '''Board: 2700-017P-3, MC0123A, Copyright 1990, K2'''<br>Same as above, but without modulator.|-|[[File:GX4000_PCB_Top_(2700-017P-3_MC0123B_K3).jpg|100px]] || [[File:GX4000_PCB_Bottom_(2700-017P-3_MC0123B_K3).jpg|100px]] || '''Board: 2700-017P-3, MC0123B, Copyright 1990, K3'''<br>R153 installed (near SCART connector)<br>handmade NR2 (between CPU and PSG)<br>Here is [[Media:Terje GX4000-MC0123B-K3.jpg|another picture]].|-|[[File:GX4000_PCB_Top_(2700-017P-3_MC0123B_K3)_NoMod.jpg|100px]] |left| [[File:GX4000_PCB_Bottom_(2700-017P-3_MC0123B_K3)_NoMod.jpg|100px]]* || '''Board: 2700-017P-3, MC0123B, Copyright 1990, K1K3'''<br style="clear:both;">The same board as the above one, but without the modulator.|-|[[File:GX4000 PCB Top.jpg|100px|left]]* || [[File:GX4000_PCB_Bottom.jpg|100px]] || '''Board: 2700-017P-4, MC0123C, Copyright 1990, K1''' ([[Media:Terje GX4000-MC0123C-K1 unrotated.jpg|other picture]])<br style="clear:both;">R153 not installed (near SCART connector)<br>D135-D142 instead of NR2, R1/R2/C2 rearranged (between CPU and PSG)<br>bigger R181 (3 Watts), C32/D180 rearranged (near RGB monitor connector)|-|[[File:GX4000_PCB_Top_(2700-017P-4_MC0123C_K2).jpg|100px]] ||[[File:GX4000_PCB_Bottom_(2700-017P-4_MC0123C_K2).jpg|100px]]|| '''Board: 2700-017P-4, MC0123C, Copyright 1990, K2'''<br>Looks same as above (only the "K2" text near the LED changed).<br> ([[Media:Terje GX4000-MC0123C-K2.jpg|other picture]])|-|[[File:GX4000_PCB_Top_(2700-017P-4_MC0123C_K2)_NoMod.jpg|100px]] |left|[[File:GX4000_PCB_Bottom_(2700-017P-4_MC0123C_K2)_NoMod.jpg|100px]]* || '''Board: 2700-017P-4, MC0123C, Copyright 1990, K2'''<br style="clear:both;">The same board as the above one, but without the modulator.|-|[[File:GX4000_PCB_Top_(2700-017P-4_MC0123C_K3).jpg|100px]] || [[File:GX4000_PCB_Bottom_(2700-017P-4_MC0123C_K3).jpg|100px]] || '''Board: 2700-017P-4, MC0123C, Copyright 1990, K3'''|-|[[File:GX 4000 MC0123C K4 bilgisayarlarim 736001086319 MA.jpg|100px|left]]* || || '''Board: 2700-017P-4, MC0123C, Copyright 1990, K4'''* <br>Looks same as above (only the "K4" text near the LED changed).|-|[[File:GX4000_PCB_Top_(2700-017P-4_MC0123C_K4).jpg|100px]] || [[File:GX4000_PCB_Bottom_(2700-017P-4_MC0123C_K4).jpg|100px]] || '''Board: 2700-017P-4, MC0123C, Copyright 1990, K4'''<br style="clear:both;">The same board as the above one, but without the modulator.|-|[[ImageFile:NoPictureGX4000 mainboard version MC0123D 2019-05-19 01-33.pngjpg|100px|left]]|| || '''Board: 2700-017P-5, MC0123D, Copyright 1990, K2'''* |-|[[File:Cpcmania GX4000 without modulator.jpg|100px]] || || '''Board: 27...?, MC...?, Copyright 1990, K3''' (without TV modulator)* <br>Version without TV Modulator installed, and with IC101 replaced by 4 transistors (used in French models; where the PAL modulator would be useless).* See [[Media:GX4000 12.jpg|this picture]] (might be same mainboard as above, not sure - the photo doesn't show the boards part number; hidden behind the cartridge slot, one thing that IS different is the K1 vs K3 text near the LED).<br style="clear:both;">|}

* '''Size: 51x60 52x60 mm''' [[GX4000 cartridge|(more pictures)]]

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[File:Inside GX4000 cart 1 unrotated.jpg|25px52px]] || [[File:Inside GX4000 cart 2.jpg|left52px]]* || '''Board: PT-NO-Z90903-MC0121A'''* - With custom LKs, and double-sided soldering points.<br style="clear:both;">|-|[[File:Cartridge-PT-NO-Z90903-MS0201A-Installed.jpg|25px52px]] |left| [[File:Cartridge-PT-NO-Z90903-MS0201A-Bottom.jpg|52px]]* || '''Board: PT-NO-Z90903-MS0201ARevision A'''* - With custom LKs, and single-sided soldering points.<br style="clear|-|[[File:both;">Z90903_MS0201A_B_PCB_Top.jpg|52px]] || [[File:Z90903_MS0201A_B_PCB_Bottom.jpg|52px]] || '''Board: PT-NO-Z90903-MS0201A Revision B'''.|-|[[File:Cartridge-2700-023P-1-Installed1_PCB_Top.jpg|25px52px]] || [[File:2700-023P-1_PCB_Bottom.jpg|left52px]]* || '''Board: 2700-023P-1'''* - With hardwired LK1 and LK6, and single-sided soldering points.<br style="clear|-|[[File:both;">2700-023P-1_27C512_PCB_Top.jpg|52px]] || [[File:2700-023P-1_27C512_PCB_Bottom.jpg|52px]] || '''Board: 2700-023P-1''' - Fitted with a 27C512 Eprom. Notice the LK3 setting.|-|[[File:Dragon CPC Plus System Cartridge PC Spanish2700-023P-1_CA1_PCB_Top.jpg|25px52px]] || [[File:2700-023P-1_CA1_PCB_Bottom.jpg|left52px]]|| '''Board: 2700-023P-1''' - Another revision of the board.* |-|[[File:GX4000_CB-1_Cartridge_PCB_Top.jpg|52px]] || [[File:GX4000_CB-1_Cartridge_PCB_Bottom.jpg|52px]] || '''Board: Nonamed'''* - Spanish cartridge without text-layer on PCB (otherwise same as 2700-023P-1).<br style="clear:both;">Older picture [[Media:Dragon CPC Plus System Cartridge PC Spanish.jpg|here]].|-|[[File:AMSTRO1_PCB_Top.jpg|52px]] || [[File:AMSTRO1_PCB_Bottom.jpg|52px]] || '''Board: AMSTRO1''' (LK1-LK6 are called L1-L6 here) - With hardwired LK1 and LK6, and double-sided soldering points.|-|}

{|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'' ||''PCB Bottom'' || Description|-|[[ImageFile:Gerald DDI-1 MF0004B.jpg|80px]] |left| [[File:Gerald DDI-1 MF0004B-Back with ABBA switch mod.jpg|80px]]* || '''Board: MF0004B, ISS3, (C) Amstrad 1984''' <br>[[Amstrad Disk Drive|(more pictures)]]* <br>20pin FDC Data Separator<br style="clear:both;">|-|}

* {|{{Prettytable|width: 700px; font-size: 2em;}}|''PCB Top'Size: 370x200 mm'||''PCB Bottom'' || Description|-|[[ImageFile:KC Compact PCB croppedKCCompact_PCB_Top.jpg|185px200px]] |left| [[File:KCCompact_PCB_Bottom.jpg|200px]]* || '''KC Compact''' [[KC Compact|(more pictures)]]* <br>'''Size: 370x200 mm'''<br>East german CPC464 clone (CPC 464-style 64K RAM, Tape Drive, though using 6128 BIOS version)|-|[[File:ALESTE_520EX_PCB_Top.jpg|200px]] || [[File:ALESTE_520EX_PCB_Bottom.jpg|200px]] || '''Board: PATISONIC ALESTE 520EX 01.003''' [[Aleste 520EX|(more pictures)]]<br >'''Size: <span style="clearcolor:both;#ff0000">???x???</span> mm'''<br>Russian CPC128 clone with some additonal features (512K RAM, additional video modes, RTC, SIO, etc.)|-|}

* '''Size: <span style="color:#ff0000">???x???</span> mm'''[[File:Deepfb-aleste-without-keyboard.jpg|200px|left]]* '''Board: PATISONIC ALESTE 520EX 01.003''' [[Aleste 520EX|(more pictures)]]* Russian CPC128 clone with some additonal features (512K RAM, additional video modes, RTC, SIO, etc.)<br style="clear:both;"> == Notes ==

=To Do = * http://cpcwiki.eu/forum/index.php/topic,678.msg9509.html#msg9509 - some more precision values for Mainboard sizes. Add them to this page! = See also ==

== Forum ==