Mainboard Versions

From CPCWiki - THE Amstrad CPC encyclopedia!
Revision as of 16:46, 12 April 2010 by Nocash (Talk | contribs) (CPC464 version 2 (new gate array))

Jump to: navigation, search

CPC464 version 1 (original)

CPC464 Z70100 Tomdalby.jpg
  • Board: PT NO Z70100, without any "MCnnnn" code, Copyright 1983
  • Original version. Big mainboard, old Gate Array (with cooling plate). Real wires going to keyboard.


CPC464 Z70100 MC0001A RobertoCarlos.jpg
  • Board: PT NO Z70100, MC0001A, Copyright 1983
  • Keyboard connector now has two rows of soldering points (maybe intended to allow to use different connectors)


CPC464 270100 Grimware crop.jpg
  • Board: PT NO 270100, MC0001A, Copyrigh 1983
  • This one is labelled 270100, not Z70100.
  • And it says "Copyrigh", not "Copyright"


CPC464 version 2 (new gate array)

  • Separate soldering points for old and new Gate Array (with changed pin-outs).
  • New connector for fragile membrane keyboards (still has optional soldering points for fitting the old more robust keyboard).
CPC464 Z70200 Tomdalby.jpg
  • Board: PT NO Z70200, MC0002D, Copyright 1984


Colossus CPC472 mainboard.jpg
  • Board: PT NO Z70200, MC0002C, Copyright 1984 with MS0043A daughterboard (more pictures)
  • The Spanish CPC472, with nonfunctional 8K RAM on the daughterboard


CPC464 version 3 (medium-sized)

  • Medium sized mainboard. Same components as previous version, but arranged more tightly. Joystick/stereo moved to left side.
  • Can be optionally fitted with Amphenol connectors (instead of Edge connectors). The srew-holes have contacts for optional shielding-plate.
CPC464 Z70374 Grimware.jpg
  • Board: PT NO Z70374, MC0044A


CPC464 Z70375 Tomdalby.jpg
  • Board: PT NO Z70375, MC0044D
  • Mostly same as MC0044A. The 3 resistors in upper-right are arranged differently, different cassette connector installed, different GND fields.


CPC464 version 4 (cost-down)

CPC464 MC0099A.jpg
  • Board: PT NO Z80329, MC0099A, Copyright 1988
  • Tiny mainboard. Uses 100pin SMD Gate Array (combines the old Gate Array, CRTC, and some FDC/DRAM/RESET logic in one chip).


CPC664

CPC664 PCB Top.jpg
  • Board: PT NO Z70205, MC0005A
  • 8pin FDC Data Separator


German Schneider CPC664 open Gryzor missing edge.jpg
  • Board: PT NO Z70205, MC0005B
  • Another 664 version, found in german Schneider CPCs (but might be also used in other countries?)
  • This board version typically includes a small patch: A resistor soldered between Pin9 (A0) and Pin14 (/CASADDR) of IC105. The patch is also seen here. The resistor is labeled as R160 in the schematic, but isn't labeled on the PCB, so it was apparently added after designing the PCB.


CPC6128 version 1 (8pin data separator, solder points for old and new gate array)

CPC6128 Z70210 Tomdalby.jpg
  • Board: PT NO Z70210, MC0009A
  • Separate soldering points for old and new Gate Array (as far as known, the old Gate Array was never used in 6128 though, only in 464).
  • 8pin FDC Data Separator.
  • Can be fitted with Amphenol connectors (as used in german cpcs) (instead of edge connectors).


CPC6128 version 2 (24pin data separator, solder points for new gate array only)

CPC6128 PCB Top (Z70290 MC0020B).jpg
  • Board: PT NO Z70290, MC0020B, R1706-94HB, Copyright 1985
  • Can be fitted with Amphenol connectors (done in germany) (instead Edge connectors).
  • Uses 24pin FDC Data Separator.
  • Here's also another picture.


CPC6128 MC00201 RobertoCarlos.jpg
  • Board: PT NO Z70290, MC0020I, 94V.0-FR-4, Copyright 1985


NoPicture.gif
  • Board: PT NO Z70290, MC0023D, 94HB-R1706, Copyright 1985
  • Sold in germany, with Amphenol connectors (and dummy edge-connectors which don't have any contacts, and which are covered by green solder-stop layer), front of mainboard has several vias for giving better contact to shielding plate).
  • Note: The board does exists: I do have a CPC with that board, but I've modified it, and putting pictures of modded boards here would look a bit confusing. Does somebody have an unmodded board? --Nocash 23:36, 9 April 2010 (UTC)


NoPicture.gif
  • Board: PT NO Z70290, MC...?, 94...?
  • Looks almost like the above german board, but the "94HB-R1706" is different
  • http://www.1000bit.it/scheda.asp?id=30 (not perfect picture quality; and board numbers are hidden under shielding plate and capacitors)


CPC6128 version 3 (cost-down)

CPC6128 Z80330 Yarek.jpg
  • Board: PT NO Z80330 (1988)
  • Uses 100pin SMD Gate Array (combines the old Gate Array and PAL, CRTC, and some FDC/DRAM/RESET logic in one chip).
  • Can be fitted with four 64Kx4 RAM chips (or the normal sixteen 64Kx1 RAM chips)
  • Printer port consists of 74LS174+74LS175 (instead of 74LS273)


CPC6128 version 1.5 (does it exist...?)

NoPicture.gif
  • Board: PT NO Z70250 - most probably, this board doesn't exist
  • On the german MC0023D board, the upper-right edge of the "9" in Z70290 is cut-off by a via, making it easy to misread the number as Z70250.


CPC 464+

CPC464Plus MC0122D NightfallCrew.jpg
  • Board: 2700-016P-3, MC0122D, Copyright 1990
  • Same mainboard is used in 464+ and 664+ (though not all components installed in 464+, and with different LK Links. Uses 160pin SMD Gate Array (ASIC).


CPC 6128+

NoPicture.gif
  • Board: 2700-016P-3, MC0122D, Copyright 1990
  • Same mainboard is used in 464+, but with additional components installed (extra RAM chips, FDC chips, Floppy connector, and with different LK Links).
  • Uses 160pin SMD Gate Array (ASIC).


NoPicture.gif
  • Board: 2700-016P-3, MC0122B, Copyright 1990
  • Another version, MC0122B, is shown in the Service Manuals (Plus series, page 5).


NoPicture.gif
  • Board: 2700-016P-3, MC0122A, Copyright 1990
  • Yet another version, MC0122A, is shown in the Service Manuals (Plus series, page 16).


GX4000

GX4000 PCB Top.jpg
  • Board: 2700-017P-4, MC0123C, Copyright 1990
  • Same chipset as CPC+, but lacks Keyboard, Expansion Port, Printer Port, Tape/Disc Interfaces.
  • Additional Scart Connector and TV Modulator.


NoPicture.gif
  • Board: 27...?, MC...?, Copyright 1990
  • Version without TV Modulator installed, and with IC101 replaced by 4 transistors.
  • See this picture (might be same mainboard as above, not sure - the photo doesn't show the boards part number; hidden behind the cartridge slot, one thing that IS different is the K1 vs K3 text near the LED).


NoPicture.gif
  • Board: 2700-017P-3, MC0123A, Copyright 1990
  • Shown in Service Manuals (Plus series, page 24 and page 32/france).


System Cartridge (BIOS of CPC+)

Inside GX4000 cart 1 unrotated.jpg
  • Board: PT-NO-Z90903-MC0121A
  • With custom LKs, and double-sided soldering points.


Cartridge-PT-NO-Z90903-MS0201A-Installed.jpg
  • Board: PT-NO-Z90903-MS0201A
  • With custom LKs, and single-sided soldering points.


Cartridge-2700-023P-1-Installed.jpg
  • Board: 2700-023P-1
  • With hardwired LK1 and LK6, and single-sided soldering points.


DDI-1

DDI-1 ISS3 MF0004B.jpg


NoPicture.gif
  • Photo of the above Board: MF0004B, ISS3 (and maybe other ISSues, if any?)


Clones

Kcc pcb.jpg


Deepfb-aleste-without-keyboard.jpg


See also

Forum