Difference between revisions of "SP0256 on Printer Port (DIY)"
From CPCWiki - THE Amstrad CPC encyclopedia!
(Created page with '<gallery caption="Amstrad SSA1"> Image:SV_SPO256_002.jpg </gallery>') |
|||
| Line 1: | Line 1: | ||
| − | <gallery caption=" | + | Below is a do it yourself project for connecting a SP0256 speech chip to a printer port, using Data, Strobe=ALD, and Busy=Status. |
| + | |||
| + | It isn't actually a CPC project (for the CPC one would need to replace LPRINT by PRINT #8), aside from that, it should be compatible with the CPC printer port (the GNDed printer D7 printer bit is no problem, since allophone numbers are only 6bit wide). | ||
| + | |||
| + | No idea what the 74374 latch is intended for, the printer port output should be latched anyways, so it seems to be totally useless. | ||
| + | |||
| + | <gallery caption="SP0256 on Printer Port (DIY) (French)"> | ||
| + | Image:SV_SPO256_001.jpg | ||
Image:SV_SPO256_002.jpg | Image:SV_SPO256_002.jpg | ||
</gallery> | </gallery> | ||
Revision as of 18:44, 6 January 2010
Below is a do it yourself project for connecting a SP0256 speech chip to a printer port, using Data, Strobe=ALD, and Busy=Status.
It isn't actually a CPC project (for the CPC one would need to replace LPRINT by PRINT #8), aside from that, it should be compatible with the CPC printer port (the GNDed printer D7 printer bit is no problem, since allophone numbers are only 6bit wide).
No idea what the 74374 latch is intended for, the printer port output should be latched anyways, so it seems to be totally useless.
- SP0256 on Printer Port (DIY) (French)
