Difference between revisions of "Schneider RS232 Interface"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
Line 1: Line 1:
 
RS232 Interface for the CPC by [[Schneider]]. Schneider is the german distributor for Amstrad CPC hardware (however, this
 
RS232 Interface for the CPC by [[Schneider]]. Schneider is the german distributor for Amstrad CPC hardware (however, this
 
interface seems to be Schneider's own invention, not an Amstrad product).
 
interface seems to be Schneider's own invention, not an Amstrad product).
 +
 +
The shape of the case dates back to a Schneider BTX modul (which was being intended to be plugged into Schneider Television Sets). Apparently Schneider produced too many cases, and re-used them for the RS232 interface.
  
 
== Pictures ==
 
== Pictures ==

Revision as of 12:04, 15 January 2010

RS232 Interface for the CPC by Schneider. Schneider is the german distributor for Amstrad CPC hardware (however, this interface seems to be Schneider's own invention, not an Amstrad product).

The shape of the case dates back to a Schneider BTX modul (which was being intended to be plugged into Schneider Television Sets). Apparently Schneider produced too many cases, and re-used them for the RS232 interface.

Pictures

I/O Ports

 F8E0h Z80 STI Indirect Data Register       Read Write
 F8E1h Z80 STI Gen. Purpose I/O Interrupt   Read Write
 F8E8h Z80 STI Pointer Vector Register      Read Write
 F8ECh Z80 STI USART Control Register       Read Write
 F8EDh Z80 STI Receiver Status Register     Read Write
 F8EEh Z80 STI Transmitter Status Register  Read Write
 F8EFh Z80 STI USART Data Register          Read Write

Software

Supported by "Starwriter".

Datasheet (Missing)

  • A "Z80 STI" is a 40pin MK3801 chip from Mostek. Details on that chip are reportedly found in the "MOSTEK 1982/1983 Microelectronic Data Book" (there is no datasheet in the internet yet).
  • The MK68901 seems to be a newer/similar chip (but neither port addresses nor pinouts are backwards compatible).

Info Fragment from a german forum (german)

  • Servus, das ist definitiv eine Schneider Rs2332. Die ist nicht Amstrad kompatibel. Die komischen Gehäuse hat Schneider, so richtig Amstrad typisch, wg. kosten genommen. Es gab in der Vergangeheit für den Schneider Fernseher ein BTX Modul, was direkt in den "HighEnd" Fernseher gesteckt werden konnte. Vorne kam dann die Tastatur dran. So konnte man mit dem Fernseher komplett BTX machen. Hat sich aber wohl nicht verkauft, oder die Produktion hat zu viele Gehäuse für das BTX-Steckmodul gemacht. So hat man die für die RS232 genommen. Genauso schauts mit der Basisplatine des BTX Modules aus, die eben diese Form mit diesem Stecker hatte. Dabei war eben noch ein Kuzes Kabel, das dann einen Platinenstecker auf beiden Seiten oder eben Platinenstecker und Centronics hatte. Das kabel ist nicht 1zu1 gekrimpt, sondern es sind da soweit ich mich erinnern kann einige Pins frei und ich glaub das auch gedrehte Kabel dabei waren. Hope that helps, Tolkin