Difference between revisions of "Schneiderware"
| Line 17: | Line 17: | ||
* [[CPC Schneider International]] 11/1987, Page 097-099, Notes (?) | * [[CPC Schneider International]] 11/1987, Page 097-099, Notes (?) | ||
Notes: The "Centronics" board is yet another [[8bit Printer Ports|8bit Printer Port]] solution (but different than the [[CPCI 8bit Printer Mod|joystick-signal based one]] that was released a few months earlier in the same magazine). The Real Time Clock is somewhat similar to the [[Real Time Clock|CPCI Real Time Clock]] released in a special issue of the same magazine, but not identical (the RTC chip has different pin-outs, and some of it's 4bit registers are working slightly different, the leap-year bits, for example). | Notes: The "Centronics" board is yet another [[8bit Printer Ports|8bit Printer Port]] solution (but different than the [[CPCI 8bit Printer Mod|joystick-signal based one]] that was released a few months earlier in the same magazine). The Real Time Clock is somewhat similar to the [[Real Time Clock|CPCI Real Time Clock]] released in a special issue of the same magazine, but not identical (the RTC chip has different pin-outs, and some of it's 4bit registers are working slightly different, the leap-year bits, for example). | ||
| + | |||
| + | Databoxes: RTC-driver with Hisoft Devpac source code in 10-1986, plus RTC-ROM-driver in 4-1987. Uni-PIO examples in 12-1986 (=only a few basic lines). There seem to be no Centronics and V/24 drivers included in databoxes. | ||
== I/O Ports == | == I/O Ports == | ||
Revision as of 10:28, 25 September 2010
The Schneiderware series consists of several DIY projects which have been released in german magazine CPC Schneider International published by DMV. The name "Schneiderware" was probably choosen due to its double meaning ("CPC Hardware" in computer language, or "specially fitted clothing" in german language). Aside from building the hardware on one's own, one could also order printed circuit boards, either fully assembled, or in kit form.
The various boards are having special connectors, intended to be mounted on the "Basisplatine" (some kind of a motherboard with ECB (Europe Card Bus) sockets) which allows to connect up to five Schneiderware boards to the CPCs Expansion Port; with some small modifications one could also connect the boards directly to the Expansion Port (the motherboard is merely an Y-cable-like adaptor without electrical components, so one doesn't really need it).
The DIY projects can be reportedly found in following issues (as by now, the magazine pages don't seem to be scanned, so details about I/O ports are unknown):
- CPC Schneider International 06/1986, Page 062-067, Schneiderware #1 Introduction (Theory)
- CPC Schneider International 07/1986, Page 060-067, Schneiderware #2 Basisplatine (Motherboard) & Centronics (Printer Port)
- CPC Schneider International 08/1986, Page 070-077, Schneiderware #3 V/24 (RS232 Interface)
- CPC Schneider International 09/1986, Page 078-083, Schneiderware #4 Netzteil (Power Supply)
- CPC Schneider International 10/1986, Page 078-085, Schneiderware #5 Echtzeituhr (Real Time Clock)
- CPC Schneider International 12/1986, Page 124-130, Schneiderware #6 Uni-PIO (48 I/O lines)
- CPC Schneider International 01/1987, Page 144, Notes (?)
- CPC Schneider International 03/1987, Page 032-045, Schneiderware #7
- CPC Schneider International 04/1987, Page 026-034, Schneiderware #8
- CPC Schneider International 05/1987, Page 032-034, Notes (?)
- CPC Schneider International 06/1987, Page 122-131, Schneiderware #9
- CPC Schneider International 11/1987, Page 097-099, Notes (?)
Notes: The "Centronics" board is yet another 8bit Printer Port solution (but different than the joystick-signal based one that was released a few months earlier in the same magazine). The Real Time Clock is somewhat similar to the CPCI Real Time Clock released in a special issue of the same magazine, but not identical (the RTC chip has different pin-outs, and some of it's 4bit registers are working slightly different, the leap-year bits, for example).
Databoxes: RTC-driver with Hisoft Devpac source code in 10-1986, plus RTC-ROM-driver in 4-1987. Uni-PIO examples in 12-1986 (=only a few basic lines). There seem to be no Centronics and V/24 drivers included in databoxes.
I/O Ports
| Address (default) | Address (alternate) | Usage |
| F8E0h | F8F0h | Schneiderware Centronics 8255 PPI Port A (data) |
| F8E1h | F8F1h | Schneiderware Centronics 8255 PPI Port B (unused) |
| F8E2h | F8F2h | Schneiderware Centronics 8255 PPI Port C (busy/strobe) (bit7=busy, bit6-1=unused, bit0=strobe; strobe is externally inverted) (autolf is wired to GND, all other control/status signals are not connected) |
| F8E3h | F8F3h | Schneiderware Centronics 8255 PPI Control |
| F9E0h | F9E2h | Schneiderware V/24 8251 USART Data |
| F9E1h | F9E3h | Schneiderware V/24 8251 USART Control |
| F9ECh | F9E8h | Schneiderware V/24 8253 Timer 0 (TX clock) |
| F9EDh | F9E9h | Schneiderware V/24 8253 Timer 1 (RX clock) |
| F9EEh | F9EAh | Schneiderware V/24 8253 Timer 2 (unused) |
| F9EFh | F9EBh | Schneiderware V/24 8253 Timer Control Note: Timer clock input is jumper select-able: 2MHz (default), or 1MHz |
Pictures
Schneiderware #2
Basisplatine (component side)
Schneiderware #2
Basisplatine (solder side)
Schneiderware #2
Centronics (component side)
Schneiderware #2
Centronics (solder side)
Schneiderware #3
V24 (component side)
Schneiderware #3
V24 (solder side)
Schneiderware #4
Supply/Netzteil (component side) (incomplete?)
Schneiderware #4
Supply/Netzteil (solder side)
Schneiderware #5
RTC/Echtzeituhr (component side)
Schneiderware #5
RTC/Echtzeituhr (solder side)
Schneiderware #6
Uni-PIO (component side)
Schneiderware #6
Uni-PIO (solder side)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Datasheets
- M5832 Datasheet - Real time clock
