Difference between revisions of "PAL16L8"

From CPCWiki - THE Amstrad CPC encyclopedia!
Jump to: navigation, search
(See also)
(See also)
Line 185: Line 185:
 
== See also ==
 
== See also ==
  
*CPC 464/664 cannot deal with A14/A15 for bank 0 like the 6128 does. So external RAM expansions differ in their behaviour regarding &C3 mode. See [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/464-preasic-c3-ram-configuration-and-rom-7/ Discussion on the forum] and [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/dk%27tronics-ram-c3-selection-464/ Another discussion]
+
*CPC 464/664 cannot deal with A14/A15 for Base 64k bank like the 6128 does. So external RAM expansions differ in their behaviour regarding &C3 mode. See [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/464-preasic-c3-ram-configuration-and-rom-7/ Discussion on the forum] and [https://www.cpcwiki.eu/forum/amstrad-cpc-hardware/dk%27tronics-ram-c3-selection-464/ Another discussion]
  
 
*[[Gate Array and ASIC Pin-Outs]]
 
*[[Gate Array and ASIC Pin-Outs]]

Revision as of 10:28, 12 May 2024

The CPC6128 second bank of 64K RAM is controlled by a PAL 16L8 chip. It has the Amstrad part number 40031.

On the CPC 6128 schematic, it is top centre: CPC6128 Schematic however the X inputs aren't distinguished.

Fixed version (Gerald)

Original version from Porchy suffer from a bad handling of the RAMDIS signal. This cause screen artefact when accessing an external extension RAM like XMEM.

A14OUT     = !(  !A14
             #   !A15 & !Q0 & Q2 );

A15OUT     = !(  !A15 & !A14
             #   !A15 & !Q1
             #   !A15 & !Q0 & !Q2 );

Q0     = (  D7ANDD6 & nRESET & D0 & !A15 & !nIOWR
         #   !D7ANDD6 & nRESET & Q0
         #   nRESET & A15 & Q0
         #   nRESET & nIOWR & Q0 );

Q1     = (  D7ANDD6 & nRESET & D1 & !A15 & !nIOWR
         #   !D7ANDD6 & nRESET & Q1
         #   nRESET & A15 & Q1
         #   nRESET & nIOWR & Q1 );

Q2     = (  D7ANDD6 & nRESET & D2 & !A15 & !nIOWR
         #   !D7ANDD6 & nRESET & Q2
         #   nRESET & A15 & Q2
         #   nRESET & nIOWR & Q2 );

nCAS0     = (  nCAS
            #   RAMDIS & !nCPU & nCAS0
            #   !A15 & A14 & !nCPU & Q2 & nCAS0
            #   A15 & A14 & !nCPU & Q0 & !Q2 & nCAS0
            #   !nCPU & !Q0 & Q1 & !Q2 & nCAS0
            #   !nCAS1 );

nCAS1     = !(  !RAMDIS & !nCAS & !A15 & A14 & !nCPU & Q2 & nCAS0
            #   !RAMDIS & !nCAS & A15 & A14 & !nCPU & Q0 & !Q2 & nCAS0
            #   !RAMDIS & !nCAS & !nCPU & !Q0 & Q1 & !Q2 & nCAS0
            #   !nCAS & !A15 & A14 & Q2 & nCAS0 & !nCAS1
            #   !nCAS & A15 & A14 & Q0 & !Q2 & nCAS0 & !nCAS1
            #   !nCAS & !Q0 & Q1 & !Q2 & nCAS0 & !nCAS1 );

File:CPC6128.JED : Fixed version of Amstrad 40031 GAL replacement

File:CPC6128.hex : Fixed version of Amstrad 40031 GAL replacement, Hex Intel version.

Initial replacement equation (Porchy)

The following equations were worked out by Porchy (member on CPCWiki Forum). These can be used to program replacements:

A15OUT = (!X2 & !X1 & A14
     # !X3 & !X2 & A14
     # A15); 

!X1 = (!A15 & D7ANDD6 & RESET & !IOWR & D0
     # !X1 & RESET & IOWR
     # !X1 & !D7ANDD6 & RESET
     # !X1 & A15 & RESET);

!X2 = (!A15 & D7ANDD6 & RESET & !IOWR & D1
     # !X2 & RESET & IOWR
     # !X2 & !D7ANDD6 & RESET
     # !X2 & A15 & RESET);

!X3 = (!A15 & D7ANDD6 & RESET & !IOWR & D2
     # !X3 & RESET & IOWR
     # !X3 & !D7ANDD6 & RESET
     # !X3 & A15 & RESET);

!CAS1 = (X3 & !X1 & A15 & A14 & !NCAS & !RAMDIS & !CPU & CAS0
     # !X3 & !A15 & A14 & !NCAS & !RAMDIS & !CPU & CAS0
     # X3 & !X2 & X1 & !NCAS & !RAMDIS & !CPU & CAS0
     # !NCAS & CAS0 & !CAS1);

!CAS0 = (X3 & X2 & X1 & !NCAS & !RAMDIS & CAS1
     # X3 & !X1 & !A15 & !NCAS & !RAMDIS & CAS1
     # !X3 & A15 & !NCAS & !RAMDIS & CAS1
     # !X1 & !A14 & !NCAS & !RAMDIS & CAS1
     # !X3 & !A14 & !NCAS & !RAMDIS & CAS1
     # !NCAS & !RAMDIS & CPU & CAS1
     # !NCAS & !CAS0 & CAS1);

A14OUT = (A15 & A14
     # !X1 & A14
     # X3 & A14);

File:Amstrad6128.jed Original JED File posted on CPCWiki Forum

PAL MMR register

This register controls how the extended RAM is banked into the CPU address space.

MMR 64K page S MM CPU Memory Mapping
7 6 5 4 3 2 1 0 &0000-&3fff &4000-&7fff &8000-&bfff &c000-&ffff
1 1 x 0 0 0 Base 64k / Bank 0 Base 64k / Bank 1 Base 64k / Bank 2 Base 64k / Bank 3
1 1 p 0 0 1 Base 64k / Bank 0 Base 64k / Bank 1 Base 64k / Bank 2 Page p / Bank 3
1 1 p 0 1 0 Page p / Bank 0 Page p / Bank 1 Page p / Bank 2 Page p / Bank 3
1 1 p 0 1 1 Base 64k / Bank 0 Base 64k / Bank 3 Base 64k / Bank 2 Page p / Bank 3
1 1 p 1 b Base 64k / Bank 0 Page p / Bank b Base 64k / Bank 2 Base 64k / Bank 3

PAL I/O port

Note that no settings are stored in the Gate Array, but the PAL and Gate Array share an I/O port address.

Bit 14 of the PAL selection address must be at 1 on CPCs equipped with CRTCs 0, 1, 2. It can be at 0 or 1 on CRTCs 3 and 4.

For compatibility reasons, it is strongly advised to always set bit 14 to 1 to select PAL.

See Discussion on the forum

PAL Type Detection

10 OUT &7F00,&C0:POKE &4000,&C0
20 OUT &7F00,&C7:POKE &4000,&C7:OUT &7F00,&C0
30 IF PEEK(&4000)=&C7 THEN PRINT"PAL chip absent":END
40 OUT &BC00,&F:OUT &3DFF,&C7
50 IF PEEK(&4000)=&C0 THEN PRINT"PAL I/O layout on CRTC 0/1/2":END
60 IF PEEK(&4000)=&C7 THEN PRINT"PAL I/O layout on CRTC 3/4":END
70 PRINT"Error!"

See also