CPCWiki forum

General Category => Amstrad CPC hardware => Topic started by: tjohnson on 23:56, 19 December 17

Title: Couple of CPC464 Hardware Restoration Questions
Post by: tjohnson on 23:56, 19 December 17

Hey all, I picked up a CPC464 for £20, purchased in unknown condition.  It arrived and was very dirty.  I've given it a good clean out, the power switch was defective and now fixed.  The mainboard had some muck on it so clean all that off and cleaned the plastics in the bath.  I took apart the keyboard and cleaned at in the sink.   Well the good news is that its working but there are a couple of issues remaining.


1) Tape counter, the reset button was separate from the counter when I took it apart, I'm assuming broken off.  The counter still works fine but without a reset button well guess what, I can't reset it.  Is this repairable or does the whole counter need replacing?
2) The tape player is working but the sound is slightly erratic and seemed to be struggling on a couple of cassettes.  I haven't replaced the belts.  Are there any tips on cleaning and lubbing the drive to try and ensure it is working as well as it can be?


Cheers Trevor
Powered by SMFPacks Menu Editor Mod