Print Page - DDI-1 / FD-1 IDC Connector notches.

Title: DDI-1 / FD-1 IDC Connector notches.
Post by: kolleykibber on 03:17, 23 February 21

So I've mashed the connectors on my DDI-1. I now need a screwdriver to remove the connector from the FD-1 socket, or else i need to reattach the ribbon every time.

Any ideas where to get an DDi-1 IDC female connector? The amstrad one appears to be unique in the choice of two protrusions and their placement. Whereas the current standard seems to have a large central protrusion and two notches.

Should I use a standard one and take a knife to it?

Title: Re: DDI-1 / FD-1 IDC Connector notches.
Post by: Bryce on 10:31, 23 February 21

Is it the connector on the cable or the connector in the FD-1 that needs to be replaced?

Bryce.

Title: Re: DDI-1 / FD-1 IDC Connector notches.
Post by: kolleykibber on 13:16, 23 February 21

Hi Bryce,

It's the A drive female connector on the cable. Fell to pieces as I tried to remove it.

While I have your attention. It looks like I can plug a gotek directly into the B socket as it doesn't carry the 5v lines. Is this true? Or will I blow it up?

Thanks

Title: Re: DDI-1 / FD-1 IDC Connector notches.
Post by: Bryce on 14:28, 23 February 21

You should be able to use the Gotek in the other connector. As for the broken one, the notches etc are irrelevant, buy a standard connector.

Bryce.

Title: Re: DDI-1 / FD-1 IDC Connector notches.
Post by: kolleykibber on 22:35, 23 February 21

Thanks Bryce. I employed the epoxy whilst I await parts.

Here's a pic of a pair of previously very dirty ddi-1's enjoying some IPA in the late winter sunshine.

Title: Re: DDI-1 / FD-1 IDC Connector notches.
Post by: Bryce on 08:21, 24 February 21

Sunshine?? I thought you were in the UK? :D

Bryce.

Title: Re: DDI-1 / FD-1 IDC Connector notches.
Post by: kolleykibber on 14:15, 24 February 21

It was a freak day. ;)

CPCWiki forum

General Category => Amstrad CPC hardware => Topic started by: kolleykibber on 03:17, 23 February 21