News:

Printed Amstrad Addict magazine announced, check it out here!

Main Menu
avatar_tazzman

Epson LX 300 II

Started by tazzman, 04:17, 18 May 14

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tazzman

Hi, Just wondering if the Epson LX300 printer is compatible with the 6128? Or would any printer (ie inkjet/dot matrix) work as long it has a centronics type interface?
Mainly printing from Tasword 6128 and Mini-Office II.


Many Thanks



pelrun

Yes, you should be fine with a centronics dot-matrix printer, especially an Epson one, since they have the defacto standard command set ESC/P (which pretty much all cpc software supports.) You might also be able to get an older Epson inkjet going, since I think they also supported ESC/P.

tazzman

Thank you Pelrun :)
Off to the computer area of the local "Trash or Treasure" market to see what I can find. I'm staying clear of eBay, there are a few dot matrix/Epson printers listed, but for some reason they are all in the U.S. and shipping costs to Australia range from $80.00 to nearly $200.00 AUD :o

Bryce

I don't have it any more, but I used an Epson Color Stylus 685 for years on my CPC.

Bryce.

TFM

Hi!


You can basically use every printer with a centronics interface. I use an HP Deskjet 500. Very nice printout!


For protext / prowort you can easily define our own printer drivers. So it doesn't matter which language the printer speaks. (I did that for HP in case somebody needs the driver).



TFM of FutureSoft
Also visit the CPC and Plus users favorite OS: FutureOS - The Revolution on CPC6128 and 6128Plus

Powered by SMFPacks Menu Editor Mod