Started by abalore, 21:08, 20 December 18
0 Members and 1 Guest are viewing this topic.
Quote from: Swainy on 16:25, 31 January 20Hi everyone, I got my M4 back from Duke as I had to send it back for repair as the SD card was not always working. Anyway, it's back and it's now working fine, I've installed the front end and again that too is mainly working great, especially when using compact images from http://cngsoft.no-ip.org/However, I'm trying to load the 128k version of Double Dragon, it loads the trainer fine and then tries to load from Disc A.I'm still not sure that the M4 rom that I've got is the correct file. Where exactly are you guys getting that file from? Thanks in advance.
Quote from: Swainy on 16:25, 31 January 20However, I'm trying to load the 128k version of Double Dragon, it loads the trainer fine and then tries to load from Disc A.
QuoteI'm still not sure that the M4 rom that I've got is the correct file. Where exactly are you guys getting that file from?
Quote from: abalore on 15:41, 08 April 19Here is the latest version with compatibility improvements.
Quote from: opticpow on 16:25, 08 July 21Hi All,I'm trying to install this and every time I add the rom to my M4, when I restart I get a black screen. The only way to recover seems to be to remove the rom files from the /m4 directory on my SD card. I've tried with & without the Modified LowerROM, and tried M4FE in a number of different ROM slots. I'm using a 6128 with the M4 in slot 6.Wayne.
Quote from: opticpow on 15:46, 09 July 21Hi Guys,So I tired the rom on WinApe, and it loads fine. So I don't think there is anything wrong with the ROM.I'm uploading the ROM via the web interface on the M4. I've tried both a 6128 & a 464 with the same result. ROM uploads fine, but when I reset the M4, I get the black screen.Another thing I've tried is to upload the ROM on the CPC side using Code Select Expand|romup,"M4FEv203.rom",5 then when I issue Code Select Expand|romupd the CPC eventually returns to the prompt. However when running a |m4help, I get a strange character instead of the ROM name, and when I reset the M4, I don't the get banner from the M4FE ROMIt's a bit of a strange one!Thanks, Wayne.
Quote from: Redbug on 21:05, 30 December 21Hi Abalore,Do you have tested it with CPCemu and it's m4 support ? I could enter in a disk but running a file doesn't work. I always have 'file not found'
ROM_BLOCK = 6, "M4.ROM", 0ROM_BLOCK = 11, "M4FEv203.rom", 0
Quote from: Redbug on 09:37, 31 December 21Copy the m4fev203.rom file in the .cpcemu/rom folderAnd in CPCemu.cfg:Code Select ExpandROM_BLOCK = 6, "M4.ROM", 0ROM_BLOCK = 11, "M4FEv203.rom", 0First line is already there
Quote from: abalore on 14:06, 31 December 21... But if it works with the real hardware...
Page created in 0.112 seconds with 50 queries.