Hi,
someone wrote me to ask me if i was able to produce the Hack-it product.
He wants to have one with the motherX format. No problem to design it.
The only problem is that for one item only, it would be pretty expensive.
So is there anyone interested in it ?
Price should be 25 euros for Hack-it (MX4 compatible, if Toto agrees that i use his universal standard :D )
at least 4 orders.
this is a kind of Multiface device, right ?
Yes, kind of but less powerful.
dissassembling, overview of memory, editor...
I was just thinking the other day that after my x-mass arrives I will need some way to transfer software from cassette to the x-mass, would this device be able to do that?
Why not redo Multiface 2 mx4 version in the first place????
Isn't the hack-it just a foreground rom, so it gets initialised before Basic.
(like the JM Demon thing John Morrison Demon Development Cartridge (http://www.cpcwiki.eu/forum/amstrad-cpc-hardware/john-morrison-demon-development-cartridge/))
You should just be able to put it in a standard rom board/megaflash/xmem etc.
Indeed, why not MF2?
As i said, it is just for someone. He specially wants a hack it interface.
I don't know Why.
MF is a good Idea, i'm going to see if it is possible to put it in a Mx4 standard pcb
I'd certainly get one... But even a Hack-it would be nice :)
Quote from: IanS on 18:08, 07 February 15
Isn't the hack-it just a foreground rom, so it gets initialised before Basic.
(like the JM Demon thing John Morrison Demon Development Cartridge (http://www.cpcwiki.eu/forum/amstrad-cpc-hardware/john-morrison-demon-development-cartridge/))
You should just be able to put it in a standard rom board/megaflash/xmem etc.
Yes, you can program the X-MEM Firmware for this use, without the need of an extra board.
Quote from: talrek on 22:40, 07 February 15MF is a good Idea, i'm going to see if it is possible to put it in a Mx4 standard pcb
A Multiface is a better idea and you are welcome to use the MX4 form factor for that.
I can give you the template if you are working under Eagle.
Quote from: TotO on 10:34, 08 February 15
A Multiface is a better idea and you are welcome to use the MX4 form factor for that.
I can give you the template if you are working under Eagle.
if you do a multiface I'll buy one! But would it be possible to hack or rewrite the multiface rom so it is universal. The commercial multifaces were made either for the CPC range amsdos or the plus range amsdos. And annoyingly are not interchangeable
Edit: I have both versions so can provide rom dumps from each if needed.
Thank you, but it's not my actual projects to redo it.
Quote from: TotO on 10:34, 08 February 15
A Multiface is a better idea and you are welcome to use the MX4 form factor for that.
I can give you the template if you are working under Eagle.
Ok thank you i'd like it.
I think really MX4 form should now be the standard for all these projects.
Quote from: CraigsBar on 11:07, 08 February 15
if you do a multiface I'll buy one! But would it be possible to hack or rewrite the multiface rom so it is universal. The commercial multifaces were made either for the CPC range amsdos or the plus range amsdos. And annoyingly are not interchangeable
Edit: I have both versions so can provide rom dumps from each if needed.
Well i'm not sure if i'm going to do it. If yes i was planning to use the files and roms on the wiki page... I just saw that to fit on a motherX4 board format i will have to use PLCC 16V8 GALs
Also i will use only 16V8 gals.
Well, I would be interested in a MF2 clone. :)
Ok first i design and i order the PCB.
second i assemble a few pieces to do some tests.
Let's go !!!
Hi
I'd be interested in a Hack-It board too :)
but perhaps the discussion to build an MF2 board for the MX4 should be on a different topic??
Quote from: archcosmo on 23:24, 08 February 15
Hi
I'd be interested in a Hack-It board too :)
but perhaps the discussion to build an MF2 board for the MX4 should be on a different topic??
Well, if I understand it right, the Hack it just need to have one ROM slot, is that right?
Hackit - CPCWiki (http://www.cpcwiki.eu/index.php/Hackit)
So just use the ROM with the X-MEM, MegaFlash, SF2, ROM-RAM-Box etc. (and add a reset button if needed).
Yes, it was just a single ROMBoard with a reset switch. There's no need to build new hardware, it will work on any ROMBoard.
Bryce.
Yes, as said.
More than hundred peoples can already do that using their X-MEM + MotherX4 combo.
So, I doubt about the real interrest of this new board. Better to work on a MF2.
Yes i understand but he really wants one, even after i explained that it should be better in a romboard, no matter which version.
But i don't understand he said he wants to put it in his CPC, but why ask me for a MX format ? May be just to have an original re-made Hack-it ??? He wants to replace the basic at the reset.
but XMEM and Megaflash can do that also, can't they ?
The X-MEM switch the lower and the upper ROM0 at the same time to avoid conflicts and make it more easy to use.
So, to use the Hacker ROM the user only need to program the same BASIC on ROM0 too.
If you have the MegaFlash you can add the lower ROM Box.
Well i asked him, and he really wants it, he already have XMEM, and he wants a card alone.
Well i'm going to make a few, since there is not a lot of people interested in it ;-)
At the same time i will order the PCB for the MF2 clone.
Quote from: talrek on 23:01, 10 February 15
Well i asked him, and he really wants it, he already have XMEM, and he wants a card alone.
Well i'm going to make a few, since there is not a lot of people interested in it ;-)
At the same time i will order the PCB for the MF2 clone.
thanks talrek, I'll take an mf2 clone please. And if possible to make it universal for cpc/plus that would be awesome.
I would also love a MF2 clone, awesome that you're making some!
yep, an Mf2 clone is great
I'll take one when they're ready
Multiface 2 for Cpc plus/cpc, in mx4 format? What will be the price? 24 euros?
I probably take one.
Hi, i'm going to make a new subject for the MF2.... :laugh: :laugh: :laugh:
For those interested in the hack, here is the picture of the board
Hi,
interfaces finished !!!
here are some pictures.
the interface has been tested on CPC6128 old, centronics and CPC6128+
Rom availables are : 7.00 (french) and 4.00 / 4.79 (english)
It works well installed in a Mother X4 on directly connected to the CPC
Price is 25 euros with the Eprom
22 Without Eprom (if you have one)
add 5 euros for extra cable (old or centronics)
add 3 euros for french shipping or 5 euros for UE shipping
(http://i.imgur.com/bul5XlPl.jpg)(http://i.imgur.com/FJlXpfGl.jpg)
Yes, please :)
How do I order?
[EDIT] Ad damn, as I was hitting POST your PM arrived :D
I am interested in one for me.
Can you put the ROM on socket ?
Thanks.
"(C) SIREN SOFTWARE 1978", huh? :laugh:
the original has the same typo
http://www.cpcwiki.eu/index.php/File:Hacker-top.jpg (http://www.cpcwiki.eu/index.php/File:Hacker-top.jpg)
Quote from: pelrun on 03:33, 19 March 15
"(C) SIREN SOFTWARE 1978", huh? :laugh:
the picture shows that there's an eprom socket under the Winbond chip already ;)
Quote from: Cpcmaniaco on 00:40, 19 March 15
I am interested in one for me.
Can you put the ROM on socket ?
Thanks.
Yes there is a socket, and don't be afraid normally Hackit Rom is in a 27C128, but i had only W27c512 EEPROM so.... Every buyer will have these models.
But it works the sme way a 27C128 ;-)
Quote from: Cpcmaniaco on 00:40, 19 March 15
I am interested in one for me.
Can you put the ROM on socket ?
Thanks.
It is already on socket.
If you still want one don't forget to give me the rom version V4.00, 4.79 or 7.00 (the last two of them are in French)
Just for info there are 3 left
The first one please, because I don't speak nothing on French.
Thanks.
I want one of this. With the english ROM. If is not too late.
Ok there are two left. :)
:-X
Quote from: qbert on 17:11, 23 March 15
:-X
it seems you took the last one, since i'm waiting also for the second.
So, no other left sorry.
If they are people interested i will see if another batch is interesting, but before i have some MF2 to build ;-) (some parts i'm still waiting for... grrrr) >:( >:( >:(
How many was that batch after all??
Well there was 10 interfaces :) And i didn't even kept one for myself :'( :'( :'(