CPCWiki forum

General Category => Amstrad CPC hardware => Topic started by: redbox on 12:11, 15 October 13

Title: HxC Floppy SD Card Firmware
Post by: redbox on 12:11, 15 October 13
Does anyone have a copy of the 1.7.2.7 (http://1.7.2.7) firmware for the HxC Floppy SD Card version?

I can't find it anywhere online and I have a card with no SRAM so this is the latest firmware that'll work with it.
Title: Re: HxC Floppy SD Card Firmware
Post by: 00WReX on 13:33, 15 October 13
I don't have a HxC, but the closest I could find was v1.7.2.0


http://maben.homeip.net/static/S100/DISK/lotharek/ (http://maben.homeip.net/static/S100/DISK/lotharek/)


Not sure if that helps...maybe at least get you going.

Cheers,
Shane
Title: Re: HxC Floppy SD Card Firmware
Post by: redbox on 14:10, 15 October 13
Quote from: 00WReX on 13:33, 15 October 13
Not sure if that helps...maybe at least get you going.

Super, thanks! That will sort it for now.

If anyone does have 1.7.2.7 (http://1.7.2.7) please let me know.
Title: Re: HxC Floppy SD Card Firmware
Post by: TFM on 04:00, 16 October 13
Why don't you add the SRAM (it's only used for Amiga anyway!)?


Are you sure the never software for HxC makes problems when using non-Amiga computers?

Title: Re: HxC Floppy SD Card Firmware
Post by: redbox on 07:41, 16 October 13
Quote from: TFM on 04:00, 16 October 13
Why don't you add the SRAM (it's only used for Amiga anyway!)?
Are you sure the never software for HxC makes problems when using non-Amiga computers?

I don't want to add SRAM as I don't need it (as you said).

And I don't want to use the newest Firmware as it creates problems hence asking for the last known good version.
Title: Re: HxC Floppy SD Card Firmware
Post by: TFM on 19:18, 16 October 13
Well, I didn't know that new newer firmware versions make problems. Hope Jeff will correct that.

Title: Re: HxC Floppy SD Card Firmware
Post by: Jeff_HxC2001 on 07:38, 17 October 13
Quote from: redbox on 07:41, 16 October 13
I don't want to add SRAM as I don't need it (as you said).

And I don't want to use the newest Firmware as it creates problems hence asking for the last known good version.

Which problem exactly?
And why you have updated your board if you "don't want to use the newest Firmware" ?!?!

The last good version is the v1.8.2.40. All older versions are not good! That's all.
The SRAM is now needed for all systems.

I don't recommend to anyone the usage of older versions (<1.8.X.X).

I am not creating new firmwares to "creates problems" but to solve issues and to enhance the device.
Title: Re: HxC Floppy SD Card Firmware
Post by: redbox on 10:07, 17 October 13
Quote from: Jeff_HxC2001 on 07:38, 17 October 13
Which problem exactly?
And why you have updated your board if you "don't want to use the newest Firmware" ?!?!

I have a Rev C SD Card HxC but it came with a very early firmware (v1.0.x) and I had a couple of issues - so I thought I would update the firmware to see if it sorted them out.

I installed the latest from your website (v1.8.2.40) as that was all I could find available.  I got the SRAM error and then the HxC wouldn't work at all with the CPC version of the Floppy Emulator Manager.

I then read a forum post that said if your board is an earlier model and doesn't have SRAM then you should treat it as a Rev B and hence only update the firmware to version v1.7.2.7.  This is also what it states in the release notes that come with the firmware update.

Quote from: Jeff_HxC2001 on 07:38, 17 October 13
The last good version is the v1.8.2.40. All older versions are not good! That's all.
The SRAM is now needed for all systems.
I don't recommend to anyone the usage of older versions (<1.8.X.X).
I am not creating new firmwares to "creates problems" but to solve issues and to enhance the device.

Well v1.8.2.40 definitely didn't work with my HxC (and CPC) and I don't have the ability to add the SRAM.  I 'downgraded' to v1.7.2.0 and all is working fine now.
Title: Re: HxC Floppy SD Card Firmware
Post by: Gryzor on 18:37, 19 October 13
What problems does a later fw cause? How did it not work?


I wonder how you can tell what revision you have if your board is cased...
Title: Re: HxC Floppy SD Card Firmware
Post by: redbox on 20:19, 19 October 13
Quote from: Gryzor on 18:37, 19 October 13
What problems does a later fw cause? How did it not work?

The latest firmware gives you a physical SRAM error on booting the HxC.

Then all versions of the Floppy Emulator Manager refuse to work with it.
Title: Re: HxC Floppy SD Card Firmware
Post by: Gryzor on 08:03, 20 October 13
Ah thanks, because I have a unit showing some issues and wasn't sure if that might be the problem...
Title: Re: HxC Floppy SD Card Firmware
Post by: Jeff_HxC2001 on 09:14, 23 October 13
Quote from: redbox on 20:19, 19 October 13
The latest firmware gives you a physical SRAM error on booting the HxC.

Then all versions of the Floppy Emulator Manager refuse to work with it.

Because you have an obsolete version of hardware (B) (without SRAM).
As stated in the released note new firmware are only for Rev C,F, Slim...
The lastest version for rev B is v1.7.2.0
Title: Re: HxC Floppy SD Card Firmware
Post by: Jeff_HxC2001 on 09:21, 23 October 13
Quote from: Gryzor on 08:03, 20 October 13
Ah thanks, because I have a unit showing some issues and wasn't sure if that might be the problem...

which issues ?
Title: Re: HxC Floppy SD Card Firmware
Post by: redbox on 12:13, 23 October 13
Quote from: Jeff_HxC2001 on 09:14, 23 October 13
The lastest version for rev B is v1.7.2.0

Yep, that's what I said all along.

Except v1.7.2.0 isn't available from your website.
Title: Re: HxC Floppy SD Card Firmware
Post by: Gryzor on 18:27, 23 October 13
Quote from: Jeff_HxC2001 on 09:21, 23 October 13
which issues ?


The ones you saw in the other thread :) 
Powered by SMFPacks Menu Editor Mod