Print Page - HxC Settings for the Amstrad Plus

Title: HxC Settings for the Amstrad Plus
Post by: dcdrac on 23:12, 15 August 13

I suspect the settings for the HxC to be used as an A:drive on the plus are different to what the are for the standard CPCs, if so it would be great if some one could let me know, if not I will fiddle around until I find the right combination.
Cable I have with the ABBA swiches on.

Title: Re: HxC Settings for the Amstrad Plus
Post by: TFM on 17:06, 16 August 13

The drive B port of the Plus is shifted for one adder, so you need an adapter or a cable with a port added in the right orientation. Check out the Wiki, it tells the whole story.

Title: Re: HxC Settings for the Amstrad Plus
Post by: dcdrac on 18:58, 16 August 13

Checked the Wiki but it does nt mention the Plus range settings for the HxC

Title: Re: HxC Settings for the Amstrad Plus
Post by: dcdrac on 19:25, 16 August 13

Done it
will make picture at the weekend for toehrs

Title: Re: HxC Settings for the Amstrad Plus
Post by: TFM on 19:45, 16 August 13

Quote from: dcdrac on 18:58, 16 August 13
Checked the Wiki but it does nt mention the Plus range settings for the HxC

The settings are like for the CPC6128 (IMHO), only the connection cable is different.

CPCWiki forum

General Category => Amstrad CPC hardware => Topic started by: dcdrac on 23:12, 15 August 13