I'm looking for a replacement 8-way (Molex?) keyboard connector for a 6128+ (though I think the same connector type is used throughout the CPC range). Is there a modern part number, or alternatively is anyone selling NOS? Thanks!
I haven't seen these connectors on offer in a very long time, so ebay is probably your best bet. If it's only one you need, I have a few "too shagged to fix" CPC PCBs that I could borrow one from?
Bryce.
Edit: These here should do the trick. They're ten pole, but you could just remove two pins from the end, the cable is unlikely to have any sideways movement: Socket 10 Way Flexible Foil Cable FPC FFC Right Angle PCB 2.54mm Pitch x10pcs | (http://www.ebay.co.uk/itm/Socket-10-Way-Flexible-Foil-Cable-FPC-FFC-Right-Angle-PCB-2-54mm-Pitch-x10pcs-/231718245333?hash=item35f37bd3d5)
Quote from: Keir on 11:36, 12 October 15
I'm looking for a replacement 8-way (Molex?) keyboard connector for a 6128+ (though I think the same connector type is used throughout the CPC range). Is there a modern part number, or alternatively is anyone selling NOS? Thanks!
Aren't the keyboard connectors 10 pins ?
Quote from: Bryce on 11:46, 12 October 15
I haven't seen these connectors on offer in a very long time, so ebay is probably your best bet. If it's only one you need, I have a few "too shagged to fix" CPC PCBs that I could borrow one from?
Bryce.
Edit: These here should do the trick. They're ten pole, but you could just remove two pins from the end, the cable is unlikely to have any sideways movement: Socket 10 Way Flexible Foil Cable FPC FFC Right Angle PCB 2.54mm Pitch x10pcs | (http://www.ebay.co.uk/itm/Socket-10-Way-Flexible-Foil-Cable-FPC-FFC-Right-Angle-PCB-2-54mm-Pitch-x10pcs-/231718245333?hash=item35f37bd3d5)
In the worst case, you could use something very mild to keep everything in place, although as bryce says movement is very unlikely. I was thinking about a very little drop of silicone, or something like that, but maybe there is something better :) .
Quote from: gerald on 12:05, 12 October 15
Aren't the keyboard connectors 10 pins ?
I didn't bother checking, he just asked for an 8 pin version... One moment...
Indeed, the plus connectors are 10way, so the link I sent will work without any modification (although he may need to bend the pins so that it's not 90°)
Bryce.
Oh yes so they are 10-way, silly me. Those are perfect then thank you Bryce!