Print Page - MP-Like scart-to-HDMI box

Title: MP-Like scart-to-HDMI box
Post by: Liartes on 14:14, 15 August 20

Hello,
I present to you my MP-Like scart-to-HDMI : composed of a PSU and a scart-to-HDMI board.With this thing you can power your CPC (5v only) and enjoy an HDMI output with only one power socket to plug ;) .The screws are recycled from the original scart-to-HDMI casing and the 3D printed case is a tigh fit so the build is really easy to achieve with a limited BOM.

I must secure the power socket solders with heat-shrinkable sleeve before saying this project is done.
Do you use any sort of custom MP-thing to enjoy your computers ?

Title: Re: MP-Like scart-to-HDMI box
Post by: Bryce on 14:30, 15 August 20

Very nice build! You should add shrink wrap on the live wires behind the IEC socket and possibly add a fuse too (if the PSU doesn't have one).

Bryce.

Title: Re: MP-Like scart-to-HDMI box
Post by: pelrun on 16:34, 15 August 20

I'm currently poking at a ridiculous setup of a GBS8200 feeding into a cheap ebay vga to hdmi converter... and then onto an equally cheap ebay hdmi capture dongle. Who knows if it will work when it's all hooked up? :D

Title: Re: MP-Like scart-to-HDMI box
Post by: Liartes on 13:19, 13 September 20

I am now satisfied with the drawing and as my mp-like box is working allright, I shared the files here : https://www.thingiverse.com/thing:4595562 (https://www.thingiverse.com/thing:4595562)

Hopefully it will be usefull to someone else.

CPCWiki forum

General Category => Amstrad CPC hardware => Topic started by: Liartes on 14:14, 15 August 20