I have recently contacted the creator of the Multiface 2 board (MX4 compatible). He has told me that he would produce a new batch if there were enough people interested. Anyone?
Count me in. :D
I own an original Romantic Robot Multiface 2 but am getting an Mx4 board.... so I will need a new MF2 with compatible connector ;)
Please, add me ;)
Hi,
I am interested in getting one.
Have a look here :-
http://www.cpcwiki.eu/forum/amstrad-cpc-hardware/multiface-ii-clone/
Ray
I would be interested in one if there is a way of using it on a standard 464 ( IDC =>Edge Connector ) - I don't have a Board yet and it will be a while before i get one TBH
I will take one as well.
Still €30?
Quote from: Skunkfish on 21:53, 10 January 18
Still €30?
talreks board was that price when I bought one a few months ago. I can't recommend one enough. Great device.
Good news, since we are around 7 people interested Bertrand has agreed to make a new batch. He is going to order the pcb and the parts and he says that the board will be in the range 30-40 euros.
Please contact him.
Hi everybody, i'm here :D
No need to send me emails, i also answer to private messages :laugh:
i was not aware people were still looking for this piece of hardware, i thought everyone had one :o
I'm going to order parts, so i think, it will be 30€ if parts are not more expensive than a year ago.
But i'm concerned about edge and Centronics connectors.
I'll try to keep the same price : 30€ for the board, and extra € for the cable you'll use.
i'll do it this evening, so please be patient. Also, orders take 1 month... try to be patient twice :laugh:
Quote from: talrek on 08:36, 15 January 18
Hi everybody, i'm here :D
No need to send me emails, i also answer to private messages [emoji23]
i was not aware people were still looking for this piece of hardware, i thought everyone had one :o
I'm going to order parts, so i think, it will be 30€ if parts are not more expensive than a year ago.
But i'm concerned about edge and Centronics connectors.
I'll try to keep the same price : 30€ for the board, and extra € for the cable you'll use.
i'll do it this evening, so please be patient. Also, orders take 1 month... try to be patient twice [emoji23]
I'd be interested in one. Cheers Trevor
Sent from my E5823 using Tapatalk
Ok time to make a list :
Batch 10x :
- Pedro José Rodriguez x1 MF2 sent
- Blackdalek x1 MF2 sent
- asertus x1 + Centronics + Edge Received
- Fedeo x1 MF2 sent
- msmthng x1 Email sent
- tjohnson x1 + Edge + Centronics Received
- skunkfish x1 MF2 sent
- chinnery x1 Paid
- Rennert x1 MF2 sent
- LambdaMikel (http://www.cpcwiki.eu/forum/profile/?u=2172) x1 MF2 sent
Please tell me also if you need an extra cable with Centronics or edge connector (or both).
Quote from: talrek on 08:36, 15 January 18
i was not aware people were still looking for this piece of hardware, i thought everyone had one :o
We've had a significant amount of new members since your last batch. Sure, I got mine from you only about six months ago or so. ;)
So it's always good to keep yourself available every few months for a batch. :D
:D i understand it's been a long time since i came here :doh:
Only one still remaining !
i buy this board [emoji3]
Quote from: Rennert on 18:12, 15 January 18
i buy this board [emoji3]
Great you are the last !!!!
Envoyé de mon SM-A320FL en utilisant Tapatalk
tuto are welcome to patch games! :doh:
Quote from: talrek on 09:04, 15 January 18
Ok time to make a list :
Batch 10x :
- Pedro José Rodriguez x1
- Blackdalek x1
- asertus x1 + Centronics
- Fedeo x1
- Vyper68 x1 + Edge
- msmthng x1
- tjohnson x1
- skunkfish x1
- chinnery x1
- Rennert x1
Please tell me also if you need an extra cable with Centronics or edge connector (or both).
Hi talrek i could do with both edge and centronics connectors. Thanks Trevor
Sent from my E5823 using Tapatalk
Oh cool! I am not a gamer, but I guess this could be useful.
Can you add me to this list please?
Thanks!
The 10 boards have their future owners, but if anyone changes his mind, you'll be the next.
If there is enough persons interrested for 10 other boards i'll do it.
Price will be the same : 30€ (the MF2 with MotherX4 connector) and 6€ for extra cable (Edge or Centronics)
Hi,
I received everything so i'm starting to build the interfaces. I hope it will be finished next sunday. Then, i will ask for payment. I will ship only when all the interfaces will be built :)
:D
Boards are ready.
Time for payment and shipment.
I sent all email with instructions. I will update the previous post with infos "Paid", "Shipped", "Received"
Quote from: talrek on 20:05, 18 February 18
Boards are ready.
Time for payment and shipment.
I sent all email with instructions. I will update the previous post with infos "Paid", "Shipped", "Received"
Yeah [emoji3]Will pay today! Great Job!
Sent from my ZTE B2017G using Tapatalk
Quote from: LambdaMikel on 22:37, 18 February 18
Yeah [emoji3]Will pay today! Great Job!
Sent from my ZTE B2017G using Tapatalk
First shipment ! I will send the tracking number for each of you !
Envoyé de mon SM-A320FL en utilisant Tapatalk
As always I'm late :(, by chance is not there any left over? ;)
Quote from: talrek on 20:54, 31 January 18
The 10 boards have their future owners, but if anyone changes his mind, you'll be the next.
If there is enough persons interrested for 10 other boards i'll do it.
Price will be the same : 30€ (the MF2 with MotherX4 connector) and 6€ for extra cable (Edge or Centronics)
I am interested in a board :)
let's see if we reach ten
OK let's start a new list (if you want additional cable just tell me Centronics or/and Edge)
- kik3is x1 Interface sent
- adolfo.pa x1 Interface sent
- Jomicamp x1 Interface sent
- Kaosoverride x1
Interface sent
- Vyper68 x1 [/size]
Interface sent
- Outsde x1 [/size]
Interface sent
- GOB [/size]
Interface sent
- Defcon Paid
One for me too. Thanks!
Please, add me to the list!
A new batch?? Add me please! x1 :D
I thought I posted weeks ago that I received my MF2 board, but I can't find anywhere that I posted such.
So, if I haven't told you already, thank you @talrek (http://www.cpcwiki.eu/forum/index.php?action=profile;u=1195) I have my MF2 board.
Come on, come on, this is good hardware for Amstrad guys !!! ;D
Hi,
I would like to be put on the list for the MF2 please. I have sorted out the problems i had before, so i would like to get one if possible please.
Just one with an edge connector please.
Hi,
ok one added :)
I wait until all the mouse interfaces are sent to order the parts for the MF2 new batch.
;)
Thanks Talrek, looking forward to getting this :)
Components ordered, everything should be available in less than one month :)
Thank you, we wait for your news to pay
Enviado desde mi Redmi Note 3 mediante Tapatalk
Hi, i almost ficnished, i'm still waiting for one sort of component to finished them all.Until that, i managed to finish three interfaces with the components i had in stock.
So i sent an email for the firsts three lucky guys !!! :laugh:
I arrive a little after the battle but I will be interested for a multiface II for CPC +
Welcome to home [emoji23], Thanks @talrek
Enviado desde mi Redmi Note 3 mediante Tapatalk
Hi !Great ! good news !!!! ;D
BTW i have 5 other interfaces if someone is still interested :laugh:
i'm interested, i want to buy one , add me to the list
Quote from: defcon on 11:19, 30 May 18
i'm interested, i want to buy one , add me to the list
Thank you the interface will be sent monday.
Only 2 remaining.
Sorry about the silly question, but do I need a MotherX4 to use the MF2-clone or will it work without it when using a proper cable?
I'm not up to date about the latest hardware for the CPC and I have no single clue what the MX4 is for nor what the expansions for it do.
Either way, I would be interested in an MF2-clone.
The MotherX4 is just a passive bus expander; there's no difference between plugging a board into it and plugging it directly into the expansion port (except for the diode drop on the 5v line.)
No board requires it, unless you want to run more than one board simultaneously.
Can one still buy the Mother X4 board somewhere?
Or at least parts to make an own one ...
@TotO (http://www.cpcwiki.eu/forum/index.php?action=profile;u=290) makes them; he no longer posts here or has a web presence but afaik he still responds to PM's.
Boarding the train here if there's still something left - I would like the chance to own one of these as well :)
- Mike
Quote from: MikeSDK on 13:18, 28 June 18
Boarding the train here if there's still something left - I would like the chance to own one of these as well :)
- Mike
Unlike others, I don't think ToTo has shared any gerbers of his boards.
But there are plenty of Mother X4 alternatives available these days.
Oh I hadn't actually noticed the topic had drifted slightly.. I was actually referring to the MF2 board
Quote from: MikeSDK on 17:06, 11 July 18
Oh I hadn't actually noticed the topic had drifted slightly.. I was actually referring to the MF2 board
Right, I was referring to the multitude of Mother X4 alternatives available.
Quote from: LambdaMikel on 17:00, 11 July 18
Unlike others, I don't think ToTo has shared any gerbers of his boards. But there are plenty of Mother X4 alternatives available these days.
I have never stopped to send MotherX4 assembled or KIT to peoples asking for it.
Is there maybe still a MF2 left?