Print Page - Need plustest.dsk testbench 5 output on original CPC 6128

Title: Need plustest.dsk testbench 5 output on original CPC 6128
Post by: freemac on 17:23, 25 September 17

Hi,

I need WinAPE'plustest.dsk testbench 5 result on an original Amstrad CPC 6128.
www.winape.net/downloads.jsp (http://www.winape.net/downloads.jsp) > Plus Test

Currently using my CoreAmstrad r005.8.16c4 I have (it's determinist) : http://www.cpcwiki.eu/index.php/File:FPGAmstrad_plustest5_r005.8.16c4_part1.png (http://www.cpcwiki.eu/index.php/File:FPGAmstrad_plustest5_r005.8.16c4_part1.png)
http://www.cpcwiki.eu/index.php/File:FPGAmstrad_plustest5_r005.8.16c4_part2.png (http://www.cpcwiki.eu/index.php/File:FPGAmstrad_plustest5_r005.8.16c4_part2.png)

I'm interested about two special behaviors :
* 2A (an instruction not using MEM_wr)
* if others tests are all OK or else like my results (or else ?)

It may help me inserting WAIT at the right place in middle of instructions...

Thanks for help ;)

Title: Re: Need plustest.dsk testbench 5 output on original CPC 6128
Post by: DanyPPC on 17:22, 26 September 17

I have only CPC 6128 Plus at home or 464 and 464 Plus.

May it be the same ?

Title: Re: Need plustest.dsk testbench 5 output on original CPC 6128
Post by: freemac on 05:03, 27 September 17

It shall be the same result in 464 than in 6128. Using plus models I have a very little doubt, but it can be cool to compare also.

Title: Re: Need plustest.dsk testbench 5 output on original CPC 6128
Post by: DanyPPC on 09:31, 27 September 17

Ok, here the results:

CPC 464 Part 1

Title: Re: Need plustest.dsk testbench 5 output on original CPC 6128
Post by: freemac on 11:46, 27 September 17

Thanks a lot !

Got to review my hypotheses :-X

Title: Re: Need plustest.dsk testbench 5 output on original CPC 6128
Post by: DanyPPC on 12:19, 27 September 17

The values are identical for both the classic CPC464 and the 6128PLUS.

CPCWiki forum

General Category => Amstrad CPC hardware => Topic started by: freemac on 17:23, 25 September 17