Print Page - Powegraph v9900 compatability

Title: Powegraph v9900 compatability
Post by: zhulien on 01:25, 26 September 24

I lent a friend d my power graph v9990 to try out some things on his cpc4atx. The power graph did work on my real 6128 plus with a Loewe scart tv vga input which is a pretty old lcd TV.

On my friends TV he just gets a blank screen I believe and a loud noise (from the robot demo). Symbos v9990 seems not much better.

I am thinking its the monitor frequency range thst is why he can't see anything. What monitors or TVs have any of you tested v9990 successfully on? Does the v9990 output 15.6lhz or higher frequencies?

Any info appreciated. Of course it could be an incompatibility with the cpc4atx?

Title: Re: Powegraph v9900 compatability
Post by: poulette73 on 07:01, 26 September 24

Only 15 Khz with V9990 ;)

Title: Re: Powegraph v9900 compatability
Post by: XeNoMoRPH on 09:17, 26 September 24

http://15khz.wikidot.com/

Title: Re: Powegraph v9900 compatability
Post by: HAL6128 on 12:06, 26 September 24

Put the GBS adapter/board between.

CPCWiki forum

General Category => Amstrad CPC hardware => Topic started by: zhulien on 01:25, 26 September 24