Screw remplacement

[fano]

I am bit a ennoyed as i do own several 6128 where are missing the 2 black/grey screw for drive, the ones that go on the left side of the 6128.Does someone know where i can find this type of screw ?

[Bryce]

As far as I know they are normal 10mm M3 fine pitch screws with a flat philips head. You should be able to get them in any decent hardware store. But I can measure one up and let you know the exact dimensions if you like.

Bryce

[Kris]

Overall length is 12mm, threading length is 9,5mm.
For the rest, Bryce gave you the details

[Bryce]

My 10mm was only a guess, but if it's really 9.5mm I wasn't far off

Be glad it's a CPC with metric screws, the Acorns all have imperial sized screws and they're almost impossible to get these days. At least in Germany.

Bryce.

[fano]

Thanks for your replies, i'll try to find theses using your indications 

[Gryzor]

Ok, I'm sure that if you told the Acorn engineer that 30 years down the road people around Europe would be discussing the screw choice he'd be quite thrilled