Print Page - Thoughts on heat sinks on a cpc 6128

Title: Thoughts on heat sinks on a cpc 6128
Post by: Cunnah on 19:32, 07 February 22

Hi,

I have recently acquired the first computer I ever had the CPC 6128 and I am currently considering if I should look at some form of cooling options to improve longevity. One of my other hobbies is high end custom gaming PC's so I have a fair collection of small form factor heatsinks (I am not sure what kind of clearance I have inside the case but these should cover all clearances short of the case actually touching the chips.

Has anyone else considered/done this? If so how did it go and what would you recommend. Further to this is it even nessacary? I am aware this is a practice with C64 chips but I have first hand seen how toasty they get.

Thanks anyhow,

Cunnah

Title: Re: Thoughts on heat sinks on a cpc 6128
Post by: Fran123 on 20:18, 07 February 22

There are 40-year old units running without heatsinks. Don't worry.

Title: Re: Thoughts on heat sinks on a cpc 6128
Post by: zhulien on 23:35, 08 February 22

my original CPC464 had a heatsink on the VGA - not sure if any other models had them.

Title: Re: Thoughts on heat sinks on a cpc 6128
Post by: TotO on 00:26, 09 February 22

Quote from: zhulien on 23:35, 08 February 22
my original CPC464 had a heatsink on the VGA - not sure if any other models had them.

Only CPC 464 with GA40007.

Title: Re: Thoughts on heat sinks on a cpc 6128
Post by: Kris on 07:36, 09 February 22

6128 with GA 40007 have this too.

Title: Re: Thoughts on heat sinks on a cpc 6128
Post by: eto on 07:49, 09 February 22

Quote from: Kris on 07:36, 09 February 226128 with GA 40007 have this too.

Oh, interesting. I always thought the 40007 never was used in a 6128. Even the Wiki says, that despite having the solder points in some 6128 board versions, the 6128 only used 40010. Do you have an example picture of such a board, so we can put that into the Wiki and update the entry?

Title: Re: Thoughts on heat sinks on a cpc 6128
Post by: gerald on 08:22, 09 February 22

Quote from: eto on 07:49, 09 February 22
Oh, interesting. I always thought the 40007 never was used in a 6128. Even the Wiki says, that despite having the solder points in some 6128 board versions, the 6128 only used 40010. Do you have an example picture of such a board, so we can put that into the Wiki and update the entry?

MC0057A in the https://www.cpcwiki.eu/index.php/Mainboard_Versions

Title: Re: Thoughts on heat sinks on a cpc 6128
Post by: eto on 08:30, 09 February 22

Quote from: gerald on 08:22, 09 February 22MC0057A

Oh I missed that one. Thanks.

Title: Re: Thoughts on heat sinks on a cpc 6128
Post by: Cunnah on 12:15, 09 February 22

Great, Also this solves a mystery I had. The board I have is a little ratty, there are some corroded traces which I am currently looking into dealing with but looking at the board revisions I noticed that a bodge wire was part of the original board and not some kind of repair.

Anyone know why that is there?

CPCWiki forum

General Category => Amstrad CPC hardware => Topic started by: Cunnah on 19:32, 07 February 22