Hi all just got my first Amstrad a CPC464 non working I figured
whats the best way to learn..
Chris
Quote from: ChrisUnionNJ on 00:31, 18 June 16
Hi all just got my first Amstrad a CPC464 non working I figured
whats the best way to learn..
Chris
Welcome
Tell us what is wrong (Not working), Pictures, voltages etc
Also have a look on the forum for others that have had Faulty units an how they went about fixing it.
Good Luck Ray
well hello there mate ;D
Quote from: Audronic on 00:52, 18 June 16
Welcome
Tell us what is wrong (Not working), Pictures, voltages etc
Also have a look on the forum for others that have had Faulty units an how they went about fixing it.
Good Luck Ray
I'm still getting stuff together I did plug it in and get a burnt sell
from the cassette drive red led came on then my PSU shut down..
Hi Chris
Please unplug the cassette player First.
Please check the Voltages that you are using that feed to the amstrad (Unloaded and then if within reason Loaded)
Loaded voltages should be +5 Volts (Tip) and - (MiINUS)12 Volts (tip) Oops 464 Not 6128.
Good luck Ray
Quote from: ChrisUnionNJ on 00:31, 18 June 16
Hi all just got my first Amstrad a CPC464 non working I figured
whats the best way to learn..
Chris
Hi and welcome! Good to see one more CPC user in the States. I'm located in New Orleans. :)
Hello and welcome.
Yes, check the voltage as described.
Mark
Quote from: 1024MAK on 00:54, 21 June 16
Hello and welcome.
Yes, check the voltage as described.
Mark
It's 5 volt I use a ZoZo PA-3012-ZM 12Watts 2 Amp and can be changed from
3 volt to 12..
I still have to make a video cable so I can see if i'm doing anything... ;D
Hello there !
I'm new to in Amstrad but i made some electronics formation, maybe you could send a picture.