Printed Amstrad Addict magazine announced, check it out here!
Started by Anthony Flack, 00:17, 22 February 23
0 Members and 1 Guest are viewing this topic.
QuoteAnd for the Commodore 1084S-P1 that has the 9-Pin RGB connector.AMSTRAD ==> 1084 9-Pin1 - RED ==> 3 - RED2 - GREEN ==> 4 - GREEN3 - BLUE ==> 5 - BLUE4 - SYNC ==> 7 - CSYNC5 - GND ==> 2 - GND
Quote from: Anthony Flack on 08:46, 27 February 23I did see that; it makes me a little nervous though. Why'd they include the resistor network in the first place?
Quote from: Anthony Flack on 08:46, 27 February 23I did see that; it makes me a little nervous though. Why'd they include the resistor network in the first place?My membrane seems to have an issue with stuck keys rather than unresponsive ones. And a few of the keys register as the wrong key it seems, so something goofy going on with the matrix I guess, maybe it's shorted somewhere.Dang those new membranes are expensive though. 30 euros for the membrane and 37 euros to post it?!
Quote from: d_kef on 09:10, 27 February 23You can check by pulling out the membrane and shorting the corresponding contacts in the connecting sockets.
Quote from: d_kef on 09:10, 27 February 23the article gives an explanation
Page created in 0.148 seconds with 22 queries.