Print Page - MegaFlash and Basic 1.1 Problem ? (Doing More Research?)

Title: MegaFlash and Basic 1.1 Problem ? (Doing More Research?)
Post by: Audronic on 04:24, 06 July 19

Hi All

I have a MegaFlash Basic 1.1 Problem
I flash Slot 0 with Basic 1.1 (80)
When I put the Megaflash on my 464 and move the 0 jumper to ON
The machine Boots, Clears screen and either stops or cycles around ? etc

I also put Parados in Slot 7 This WORKS when I move the 7 jumper to ON

Any help would be Appreciated
I Have also tried this on a second Megaflash. Same result ?

Thanks. Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: AMSDOS on 11:02, 06 July 19

I maybe wrong, but I think BASIC 1.1 only works on a 464 if it has come from a 664 and not a 6128. :-[

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: TotO on 12:16, 06 July 19

You must have the Firmware and the BASIC matching to work properly.
- FW 1.0 + BASIC 1.0
- FW 2.0 + BASIC 1.1
- FW 3.0 + BASIC 1.2 (display 1.1)

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 13:15, 06 July 19

Quote from: AMSDOS on 11:02, 06 July 19
I maybe wrong, but I think BASIC 1.1 only works on a 464 if it has come from a 664 and not a 6128. :-[

@AMSDOS (http://www.cpcwiki.eu/forum/index.php?action=profile;u=330)
Thanks I will try that
Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 13:17, 06 July 19

Quote from: TotO on 12:16, 06 July 19
You must have the Firmware and the BASIC matching to work properly.
- FW 1.0 + BASIC 1.0
- FW 2.0 + BASIC 1.1
- FW 3.0 + BASIC 1.2 (display 1.1)

@Tot0
Thanks I will try that as well.
Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 02:58, 08 July 19

Quote from: AMSDOS on 11:02, 06 July 19
I maybe wrong, but I think BASIC 1.1 only works on a 464 if it has come from a 664 and not a 6128. :-[

Hi Amsdos

The 664 Basic Rom did not work ?
so I put the BASIC464.rom in slot 0 and The 464 Rom also did not work ?

Are there any tests I can do to get this working.
Thanks. Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: AMSDOS on 04:01, 08 July 19

Hi Ray, :-[

@TotO (http://www.cpcwiki.eu/forum/index.php?action=profile;u=290) has more likely suggested the correct course of action which involves including the correct Firmware version.

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 08:05, 08 July 19

Quote from: AMSDOS on 04:01, 08 July 19
Hi Ray, :-[ @TotO (http://www.cpcwiki.eu/forum/index.php?action=profile;u=290) has more likely suggested the correct course of action which involves including the correct Firmware version.

Thanks I will PM ToT0 as even that did not work Hmmmmmmm

Thanks. Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Bryce on 08:10, 08 July 19

You need a LowerROM board or similar to change the Firmware in the CPC to the 6128 Firmware. Then you can use BASIC 1.1 on a 464.

Bryce.

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 08:17, 08 July 19

Quote from: Bryce on 08:10, 08 July 19
You need a LowerROM board or similar to change the Firmware in the CPC to the 6128 Firmware. Then you can use BASIC 1.1 on a 464.Bryce.

Hi Bryce

what if I flashed the chip in my PC with just basic and FW3.1.x .
Would that work without the LowerROM Board ( The LowerROM boards are being made in china at the moment) ?

Thanks. Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Bryce on 08:21, 08 July 19

The MegaFlash can't replace the LowerROM, you'd have to remove the ROM from the CPC Mainboard and program an EPROM with the Firmware and BASIC. Or wait for those PCBs to arrive.

Bryce.

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 08:26, 08 July 19

@Bryce (http://www.cpcwiki.eu/forum/index.php?action=profile;u=225)

Ok Thanks I will wait for the Boards..

Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: TotO on 09:23, 08 July 19

Exactly. The BASIC does CALL to the Firmware routine that have to match the good addresses entries to not fail.
Remember that original Amstrad ROM circuit is 32K (OS+BASIC) not 2x16K ... It is why the X-MEM always switch them together.

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 10:22, 08 July 19

@ Tot0

Thanks

Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 04:00, 09 July 19

Thanks All

I tried Tot0's Files and No Success.
I will have to wait for the Lower Rom Boards.

Thanks all

Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: TotO on 09:14, 09 July 19

How can you try my files w/o the LowerROM board? The Firmware must be on it.

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 12:16, 09 July 19

Quote from: TotO on 09:14, 09 July 19
How can you try my files w/o the LowerROM board? The Firmware must be on it.

Ok. This is what I did.:-

Using your files I Made up a file (On a PC) with the following.

For Slot 0 &0000 to &3fff BASIC12.ROM (80)

For Slot 7 &1,C000 to &1ffff OS6128.ROM (01)

The rest is filled with FF's.
I then flashed the chip (on a PC).
Put the chip in the megaFlash operated both switches to the Right ( 0 ON and 7 ON )
Plugged it into a CPC464 to see if it would work ??
No Success ?

I thought that that would work in a 464 ?.

Thats what happened ?

Ray

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: TotO on 12:19, 09 July 19

The OS6128.ROM don't go to the ROM7 slot. It is not AMSDOS.
You have to add it under the ROM0. So, only possible with the LowerROM board with the MegaFlash.

Title: Re: MegaFlash and Basic 1.1 Problem ?
Post by: Audronic on 12:26, 09 July 19

Quote from: TotO on 12:19, 09 July 19
The OS6128.ROM don't go to the ROM7 slot. It is not AMSDOS.
You have to add it under the ROM0. So, only possible with the LowerROM board with the MegaFlash.

Ok Thanks

I will have to do some more research.

Ray

CPCWiki forum

General Category => Technical support - Hardware related => Topic started by: Audronic on 04:24, 06 July 19